SpaceVim/bundle/telescope.nvim/doc/telescope.txt

================================================================================
INTRODUCTION                                                    *telescope.nvim*

Telescope.nvim is a plugin for fuzzy finding and neovim. It helps you search,
filter, find and pick things in Lua.

Getting started with telescope:
  1. Run `:checkhealth telescope` to make sure everything is installed.
  2. Evaluate it working with `:Telescope find_files` or `:lua
     require("telescope.builtin").find_files()`
  3. Put a `require("telescope").setup() call somewhere in your neovim config.
  4. Read |telescope.setup| to check what config keys are available and what
     you can put inside the setup call
  5. Read |telescope.builtin| to check which builtin pickers are offered and
     what options these implement
  6. Profit

The below flow chart illustrates a simplified telescope architecture:
┌───────────────────────────────────────────────────────────┐
│      ┌────────┐                                           │
│      │ Multi  │                                ┌───────+  │
│      │ Select │    ┌───────┐                   │ Entry │  │
│      └─────┬──*    │ Entry │    ┌────────+     │ Maker │  │
│            │   ┌───│Manager│────│ Sorter │┐    └───┬───*  │
│            ▼   ▼   └───────*    └────────┘│        │      │
│            1────────┐                 2───┴──┐     │      │
│      ┌─────│ Picker │                 │Finder│◄────┘      │
│      ▼     └───┬────┘                 └──────*            │
│ ┌────────┐     │       3────────+         ▲               │
│ │Selected│     └───────│ Prompt │─────────┘               │
│ │ Entry  │             └───┬────┘                         │
│ └────────*             ┌───┴────┐  ┌────────┐  ┌────────┐ │
│     │  ▲    4─────────┐│ Prompt │  │(Attach)│  │Actions │ │
│     ▼  └──► │ Results ││ Buffer │◄─┤Mappings│◄─┤User Fn │ │
│5─────────┐  └─────────┘└────────┘  └────────┘  └────────┘ │
││Previewer│                                                │
│└─────────┘                   telescope.nvim architecture  │
└───────────────────────────────────────────────────────────┘

  + The `Entry Maker` at least defines
    - value: "raw" result of the finder
    - ordinal: string to be sorted derived from value
    - display: line representation of entry in results buffer

  * The finder, entry manager, selected entry, and multi selections
    comprises `entries` constructed by the `Entry Maker` from
    raw results of the finder (`value`s)

 Primary components:
  1 Picker: central UI dedicated to varying use cases
            (finding files, grepping, diagnostics, etc.)
            see :h telescope.builtin
  2 Finder: pipe or interactively generates results to pick over
  3 Prompt: user input that triggers the finder which sorts results
            in order into the entry manager
  4 Results: listed entries scored by sorter from finder results
  5 Previewer: preview of context of selected entry
               see :h telescope.previewers

A practical introduction into telescope customization is our `developers.md`
(top-level of repo) and `:h telescope.actions` that showcase how to access
information about the state of the picker (current selection, etc.).
To find out more:
https://github.com/nvim-telescope/telescope.nvim

  :h telescope.setup
  :h telescope.command
  :h telescope.builtin
  :h telescope.themes
  :h telescope.layout
  :h telescope.resolve
  :h telescope.actions
  :h telescope.actions.state
  :h telescope.actions.set
  :h telescope.actions.utils
  :h telescope.actions.generate
  :h telescope.actions.history
  :h telescope.previewers

telescope.setup({opts})                                    *telescope.setup()*
    Setup function to be run by user. Configures the defaults, pickers and
    extensions of telescope.

    Usage:
    >
    require('telescope').setup{
      defaults = {
        -- Default configuration for telescope goes here:
        -- config_key = value,
        -- ..
      },
      pickers = {
        -- Default configuration for builtin pickers goes here:
        -- picker_name = {
        --   picker_config_key = value,
        --   ...
        -- }
        -- Now the picker_config_key will be applied every time you call this
        -- builtin picker
      },
      extensions = {
        -- Your extension configuration goes here:
        -- extension_name = {
        --   extension_config_key = value,
        -- }
        -- please take a look at the readme of the extension you want to configure
      }
    }
<


    Valid keys for {opts.defaults}

                                      *telescope.defaults.sorting_strategy*
    sorting_strategy: ~
        Determines the direction "better" results are sorted towards.

        Available options are:
        - "descending" (default)
        - "ascending"

                                    *telescope.defaults.selection_strategy*
    selection_strategy: ~
        Determines how the cursor acts after each sort iteration.

        Available options are:
        - "reset" (default)
        - "follow"
        - "row"
        - "closest"
        - "none"

                                       *telescope.defaults.scroll_strategy*
    scroll_strategy: ~
        Determines what happens if you try to scroll past the view of the
        picker.

        Available options are:
        - "cycle" (default)
        - "limit"

                                       *telescope.defaults.layout_strategy*
    layout_strategy: ~
        Determines the default layout of Telescope pickers.
        See |telescope.layout| for details of the available strategies.

        Default: 'horizontal'

                                         *telescope.defaults.layout_config*
    layout_config: ~
        Determines the default configuration values for layout strategies.
        See |telescope.layout| for details of the configurations options for
        each strategy.

        Allows setting defaults for all strategies as top level options and
        for overriding for specific options.
        For example, the default values below set the default width to 80% of
        the screen width for all strategies except 'center', which has width
        of 50% of the screen width.

        Default: {
          bottom_pane = {
            height = 25,
            preview_cutoff = 120,
            prompt_position = "top"
          },
          center = {
            height = 0.4,
            preview_cutoff = 40,
            prompt_position = "top",
            width = 0.5
          },
          cursor = {
            height = 0.9,
            preview_cutoff = 40,
            width = 0.8
          },
          horizontal = {
            height = 0.9,
            preview_cutoff = 120,
            prompt_position = "bottom",
            width = 0.8
          },
          vertical = {
            height = 0.9,
            preview_cutoff = 40,
            prompt_position = "bottom",
            width = 0.8
          }
        }


                                     *telescope.defaults.cycle_layout_list*
    cycle_layout_list: ~
        Determines the layouts to cycle through when using `actions.cycle_layout_next`
        and `actions.cycle_layout_prev`.
        Should be a list of "layout setups".
        Each "layout setup" can take one of two forms:
        1. string <br>
            This is interpreted as the name of a `layout_strategy`
        2. table <br>
            A table with possible keys `layout_strategy`, `layout_config` and `previewer`

        Default: { "horizontal", "vertical" }


                                              *telescope.defaults.winblend*
    winblend: ~
        Configure winblend for telescope floating windows. See |winblend| for
        more information.

        Default: 0

                                          *telescope.defaults.wrap_results*
    wrap_results: ~
        Word wrap the search results

        Default: false

                                         *telescope.defaults.prompt_prefix*
    prompt_prefix: ~
        The character(s) that will be shown in front of Telescope's prompt.

        Default: '> '

                                       *telescope.defaults.selection_caret*
    selection_caret: ~
        The character(s) that will be shown in front of the current selection.


        Default: '> '

                                          *telescope.defaults.entry_prefix*
    entry_prefix: ~
        Prefix in front of each result entry. Current selection not included.

        Default: '  '

                                            *telescope.defaults.multi_icon*
    multi_icon: ~
        Symbol to add in front of a multi-selected result entry.
        Replaces final character of |telescope.defaults.selection_caret| and
        |telescope.defaults.entry_prefix| as appropriate.
        To have no icon, set to the empty string.

        Default: '+'

                                          *telescope.defaults.initial_mode*
    initial_mode: ~
        Determines in which mode telescope starts. Valid Keys:
        `insert` and `normal`.

        Default: "insert"

                                                *telescope.defaults.border*
    border: ~
        Boolean defining if borders are added to Telescope windows.

        Default: true

                                          *telescope.defaults.path_display*
    path_display: ~
        Determines how file paths are displayed

        path_display can be set to an array with a combination of:
        - "hidden"    hide file names
        - "tail"      only display the file name, and not the path
        - "absolute"  display absolute paths
        - "smart"     remove as much from the path as possible to only show
                      the difference between the displayed paths.
                      Warning: The nature of the algorithm might have a negative
                      performance impact!
        - "shorten"   only display the first character of each directory in
                      the path
        - "truncate"  truncates the start of the path when the whole path will
                      not fit. To increase the the gap between the path and the edge.
                      set truncate to number `truncate = 3`

        You can also specify the number of characters of each directory name
        to keep by setting `path_display.shorten = num`.
          e.g. for a path like
            `alpha/beta/gamma/delta.txt`
          setting `path_display.shorten = 1` will give a path like:
            `a/b/g/delta.txt`
          Similarly, `path_display.shorten = 2` will give a path like:
            `al/be/ga/delta.txt`

        You can also further customise the shortening behaviour by
        setting `path_display.shorten = { len = num, exclude = list }`,
        where `len` acts as above, and `exclude` is a list of positions
        that are not shortened. Negative numbers in the list are considered
        relative to the end of the path.
          e.g. for a path like
            `alpha/beta/gamma/delta.txt`
          setting `path_display.shorten = { len = 1, exclude = {1, -1} }`
          will give a path like:
            `alpha/b/g/delta.txt`
          setting `path_display.shorten = { len = 2, exclude = {2, -2} }`
          will give a path like:
            `al/beta/gamma/de`

        path_display can also be set to 'hidden' string to hide file names

        path_display can also be set to a function for custom formatting of
        the path display. Example:

            -- Format path as "file.txt (path\to\file\)"
            path_display = function(opts, path)
              local tail = require("telescope.utils").path_tail(path)
              return string.format("%s (%s)", tail, path)
            end,

        Default: {}

                                           *telescope.defaults.borderchars*
    borderchars: ~
        Set the borderchars of telescope floating windows. It has to be a
        table of 8 string values.

        Default: { "─", "│", "─", "│", "╭", "╮", "╯", "╰" }

                                       *telescope.defaults.get_status_text*
    get_status_text: ~
        A function that determines what the virtual text looks like.
        Signature: function(picker) -> str

        Default: function that shows current count / all

                                         *telescope.defaults.hl_result_eol*
    hl_result_eol: ~
        Changes if the highlight for the selected item in the results
        window is always the full width of the window

        Default: true

                                 *telescope.defaults.dynamic_preview_title*
    dynamic_preview_title: ~
        Will change the title of the preview window dynamically, where it
        is supported. For example, the preview window's title could show up as
        the full filename.

        Default: false

                                         *telescope.defaults.results_title*
    results_title: ~
        Defines the default title of the results window. A false value
        can be used to hide the title altogether.

        Default: "Results"

                                          *telescope.defaults.prompt_title*
    prompt_title: ~
        Defines the default title of the prompt window. A false value
        can be used to hide the title altogether. Most of the times builtins
        define a prompt_title which will be prefered over this default.

        Default: "Prompt"

                                              *telescope.defaults.mappings*
    mappings: ~
        Your mappings to override telescope's default mappings.

        See: ~
            |telescope.mappings|


                                      *telescope.defaults.default_mappings*
    default_mappings: ~
        Not recommended to use except for advanced users.

        Will allow you to completely remove all of telescope's default maps
        and use your own.


                                               *telescope.defaults.history*
    history: ~
        This field handles the configuration for prompt history.
        By default it is a table, with default values (more below).
        To disable history, set it to false.

        Currently mappings still need to be added, Example:
          mappings = {
            i = {
              ["<C-Down>"] = require('telescope.actions').cycle_history_next,
              ["<C-Up>"] = require('telescope.actions').cycle_history_prev,
            },
          },

        Fields:
          - path:    The path to the telescope history as string.
                     default: stdpath("data")/telescope_history
          - limit:   The amount of entries that will be written in the
                     history.
                     Warning: If limit is set to nil it will grow unbound.
                     default: 100
          - handler: A lua function that implements the history.
                     This is meant as a developer setting for extensions to
                     override the history handling, e.g.,
                     https://github.com/nvim-telescope/telescope-smart-history.nvim,
                     which allows context sensitive (cwd + picker) history.

                     Default:
                     require('telescope.actions.history').get_simple_history

                                          *telescope.defaults.cache_picker*
    cache_picker: ~
        This field handles the configuration for picker caching.
        By default it is a table, with default values (more below).
        To disable caching, set it to false.

        Caching preserves all previous multi selections and results and
        therefore may result in slowdown or increased RAM occupation
        if too many pickers (`cache_picker.num_pickers`) or entries
        ('cache_picker.limit_entries`) are cached.

        Fields:
          - num_pickers:      The number of pickers to be cached.
                              Set to -1 to preserve all pickers of your session.
                              If passed to a picker, the cached pickers with
                              indices larger than `cache_picker.num_pickers` will
                              be cleared.
                              Default: 1
          - limit_entries:    The amount of entries that will be written in the
                              Default: 1000


                                               *telescope.defaults.preview*
    preview: ~
        This field handles the global configuration for previewers.
        By default it is a table, with default values (more below).
        To disable previewing, set it to false. If you have disabled previewers
        globally, but want to opt in to previewing for single pickers, you will have to
        pass `preview = true` or `preview = {...}` (your config) to the `opts` of
        your picker.

        Fields:
          - check_mime_type:  Use `file` if available to try to infer whether the
                              file to preview is a binary if plenary's
                              filetype detection fails.
                              Windows users get `file` from:
                              https://github.com/julian-r/file-windows
                              Set to false to attempt to preview any mime type.
                              Default: true for all OS excl. Windows
          - filesize_limit:   The maximum file size in MB attempted to be previewed.
                              Set to false to attempt to preview any file size.
                              Default: 25
          - timeout:          Timeout the previewer if the preview did not
                              complete within `timeout` milliseconds.
                              Set to false to not timeout preview.
                              Default: 250
          - hook(s):          Function(s) that takes `(filepath, bufnr, opts)`, where opts
                              exposes winid and ft (filetype).
                              Available hooks (in order of priority):
                              {filetype, mime, filesize, timeout}_hook
                              Important: the filetype_hook must return true or false
                              to indicate whether to continue (true) previewing or not (false),
                              respectively.
                              Two examples:
                              local putils = require("telescope.previewers.utils")
                              ... -- preview is called in telescope.setup { ... }
                                preview = {
                                  -- 1) Do not show previewer for certain files
                                  filetype_hook = function(filepath, bufnr, opts)
                                    -- you could analogously check opts.ft for filetypes
                                    local excluded = vim.tbl_filter(function(ending)
                                      return filepath:match(ending)
                                    end, {
                                      ".*%.csv",
                                      ".*%.toml",
                                    })
                                    if not vim.tbl_isempty(excluded) then
                                      putils.set_preview_message(
                                        bufnr,
                                        opts.winid,
                                        string.format("I don't like %s files!",
                                        excluded[1]:sub(5, -1))
                                      )
                                      return false
                                    end
                                    return true
                                  end,
                                  -- 2) Truncate lines to preview window for too large files
                                  filesize_hook = function(filepath, bufnr, opts)
                                    local path = require("plenary.path"):new(filepath)
                                    -- opts exposes winid
                                    local height = vim.api.nvim_win_get_height(opts.winid)
                                    local lines = vim.split(path:head(height), "[\r]?\n")
                                    vim.api.nvim_buf_set_lines(bufnr, 0, -1, false, lines)
                                  end,
                                }
                              The configuration recipes for relevant examples.
                              Note: if plenary does not recognize your filetype yet --
                              1) Please consider contributing to:
                                 $PLENARY_REPO/data/plenary/filetypes/builtin.lua
                              2) Register your filetype locally as per link
                                 https://github.com/nvim-lua/plenary.nvim#plenaryfiletype
                              Default: nil
          - treesitter:       Determines whether the previewer performs treesitter
                              highlighting, which falls back to regex-based highlighting.
                              `true`: treesitter highlighting for all available filetypes
                              `false`: regex-based highlighting for all filetypes
                              `table`: following nvim-treesitters highlighting options:
                                It contains two keys:
                                  - enable boolean|table: if boolean, enable all ts
                                                          highlighing with that flag,
                                                          disable still considered.
                                                          Containing a list of filetypes,
                                                          that are enabled, disabled
                                                          ignored because it doesnt make
                                                          any sense in this case.
                                  - disable table: containing a list of filetypes
                                                   that are disabled
                              Default: true
          - msg_bg_fillchar:  Character to fill background of unpreviewable buffers with
                              Default: "╱"
          - hide_on_startup:  Hide previewer when picker starts. Previewer can be toggled
                              with actions.toggle_preview.
                              Default: false


                                     *telescope.defaults.vimgrep_arguments*
    vimgrep_arguments: ~
        Defines the command that will be used for `live_grep` and `grep_string`
        pickers.
        Hint: Make sure that color is currently set to `never` because we do
        not yet interpret color codes
        Hint 2: Make sure that these options are in your changes arguments:
          "--no-heading", "--with-filename", "--line-number", "--column"
        because we need them so the ripgrep output is in the correct format.

        Default: {
          "rg",
          "--color=never",
          "--no-heading",
          "--with-filename",
          "--line-number",
          "--column",
          "--smart-case"
        }

                                              *telescope.defaults.use_less*
    use_less: ~
        Boolean if less should be enabled in term_previewer (deprecated and
        currently no longer used in the builtin pickers).

        Default: true

                                               *telescope.defaults.set_env*
    set_env: ~
        Set an environment for term_previewer. A table of key values:
        Example: { COLORTERM = "truecolor", ... }
        Hint: Empty table is not allowed.

        Default: nil

                                        *telescope.defaults.color_devicons*
    color_devicons: ~
        Boolean if devicons should be enabled or not. If set to false, the
        text highlight group is used.
        Hint: Coloring only works if |termguicolors| is enabled.

        Default: true

                                           *telescope.defaults.file_sorter*
    file_sorter: ~
        A function pointer that specifies the file_sorter. This sorter will
        be used for find_files, git_files and similar.
        Hint: If you load a native sorter, you dont need to change this value,
        the native sorter will override it anyway.

        Default: require("telescope.sorters").get_fzy_sorter

                                        *telescope.defaults.generic_sorter*
    generic_sorter: ~
        A function pointer to the generic sorter. The sorter that should be
        used for everything that is not a file.
        Hint: If you load a native sorter, you dont need to change this value,
        the native sorter will override it anyway.

        Default: require("telescope.sorters").get_fzy_sorter

                                      *telescope.defaults.prefilter_sorter*
    prefilter_sorter: ~
        This points to a wrapper sorter around the generic_sorter that is able
        to do prefiltering.
        Its usually used for lsp_*_symbols and lsp_*_diagnostics

        Default: require("telescope.sorters").prefilter

                                              *telescope.defaults.tiebreak*
    tiebreak: ~
        A function that determines how to break a tie when two entries have
        the same score.
        Having a function that always returns false would keep the entries in
        the order they are found, so existing_entry before current_entry.
        Vice versa always returning true would place the current_entry
        before the existing_entry.

        Signature: function(current_entry, existing_entry, prompt) -> boolean

        Default: function that breaks the tie based on the length of the
                 entry's ordinal

                                  *telescope.defaults.file_ignore_patterns*
    file_ignore_patterns: ~
        A table of lua regex that define the files that should be ignored.
        Example: { "^scratch/" } -- ignore all files in scratch directory
        Example: { "%.npz" } -- ignore all npz files
        See: https://www.lua.org/manual/5.1/manual.html#5.4.1 for more
        information about lua regex
        Note: `file_ignore_patterns` will be used in all pickers that have a
        file associated. This might lead to the problem that lsp_ pickers
        aren't displaying results because they might be ignored by
        `file_ignore_patterns`. For example, setting up node_modules as ignored
        will never show node_modules in any results, even if you are
        interested in lsp_ results.

        If you only want `file_ignore_patterns` for `find_files` and
        `grep_string`/`live_grep` it is suggested that you setup `gitignore`
        and have fd and or ripgrep installed because both tools will not show
        `gitignore`d files on default.

        Default: nil

                                  *telescope.defaults.get_selection_window*
    get_selection_window: ~
          Function that takes function(picker, entry) and returns a window id.
          The window ID will be used to decide what window the chosen file will
          be opened in and the cursor placed in upon leaving the picker.

          Default: `function() return 0 end`


                                        *telescope.defaults.file_previewer*
    file_previewer: ~
        Function pointer to the default file_previewer. It is mostly used
        for find_files, git_files and similar.
        You can change this function pointer to either use your own
        previewer or use the command-line program bat as the previewer:
          require("telescope.previewers").cat.new

        Default: require("telescope.previewers").vim_buffer_cat.new

                                        *telescope.defaults.grep_previewer*
    grep_previewer: ~
        Function pointer to the default vim_grep previewer. It is mostly
        used for live_grep, grep_string and similar.
        You can change this function pointer to either use your own
        previewer or use the command-line program bat as the previewer:
          require("telescope.previewers").vimgrep.new

        Default: require("telescope.previewers").vim_buffer_vimgrep.new

                                      *telescope.defaults.qflist_previewer*
    qflist_previewer: ~
        Function pointer to the default qflist previewer. It is mostly
        used for qflist, loclist and lsp.
        You can change this function pointer to either use your own
        previewer or use the command-line program bat as the previewer:
          require("telescope.previewers").qflist.new

        Default: require("telescope.previewers").vim_buffer_qflist.new

                                *telescope.defaults.buffer_previewer_maker*
    buffer_previewer_maker: ~
        Developer option that defines the underlining functionality
        of the buffer previewer.
        For interesting configuration examples take a look at
        https://github.com/nvim-telescope/telescope.nvim/wiki/Configuration-Recipes

        Default: require("telescope.previewers").buffer_previewer_maker

    Parameters: ~
        {opts} (table)  Configuration opts. Keys: defaults, pickers,
                        extensions


telescope.load_extension({name})                  *telescope.load_extension()*
    Load an extension.
    - Notes:
      - Loading triggers ext setup via the config passed in |telescope.setup|


    Parameters: ~
        {name} (string)  Name of the extension


telescope.register_extension({mod})           *telescope.register_extension()*
    Register an extension. To be used by plugin authors.


    Parameters: ~
        {mod} (table)  Module


telescope.extensions()                                *telescope.extensions()*
    Use telescope.extensions to reference any extensions within your
    configuration.
    While the docs currently generate this as a function, it's actually a
    table. Sorry.




================================================================================
COMMAND                                                      *telescope.command*

Telescope commands can be called through two apis, the lua api and the viml
api.

The lua api is the more direct way to interact with Telescope, as you directly
call the lua functions that Telescope defines. It can be called in a lua file
using commands like:
`require("telescope.builtin").find_files({hidden=true, layout_config={prompt_position="top"}})`
If you want to use this api from a vim file you should prepend `lua` to the
command, as below:
`lua require("telescope.builtin").find_files({hidden=true, layout_config={prompt_position="top"}})`
If you want to use this api from a neovim command line you should prepend
`:lua` to the command, as below:
`:lua require("telescope.builtin").find_files({hidden=true, layout_config={prompt_position="top"}})`

The viml api is more indirect, as first the command must be parsed to the
relevant lua equivalent, which brings some limitations. The viml api can be
called using commands like:
`:Telescope find_files hidden=true layout_config={"prompt_position":"top"}`
This involves setting options using an `=` and using viml syntax for lists and
dictionaries when the corresponding lua function requires a table.

One limitation of the viml api is that there can be no spaces in any of the
options. For example, if you want to use the `cwd` option for `find_files` to
specify that you only want to search within the folder `/foo bar/subfolder/`
you could not do that using the viml api, as the path name contains a space.
Similarly, you could NOT set the `prompt_position` to `"top"` using the
following command:
`:Telescope find_files layout_config={ "prompt_position" : "top" }`
as there are spaces in the option.



================================================================================
BUILTIN                                                      *telescope.builtin*

Telescope Builtins is a collection of community maintained pickers to support
common workflows. It can be used as reference when writing PRs, Telescope
extensions, your own custom pickers, or just as a discovery tool for all of the
amazing pickers already shipped with Telescope!

Any of these functions can just be called directly by doing:

:lua require('telescope.builtin').$NAME_OF_PICKER()

To use any of Telescope's default options or any picker-specific options, call
your desired picker by passing a lua table to the picker with all of the
options you want to use. Here's an example with the live_grep picker:

>
  :lua require('telescope.builtin').live_grep({
    prompt_title = 'find string in open buffers...',
    grep_open_files = true
  })
  -- or with dropdown theme
  :lua require('telescope.builtin').find_files(require('telescope.themes').get_dropdown{
    previewer = false
  })
<

builtin.live_grep({opts})                      *telescope.builtin.live_grep()*
    Search for a string and get results live as you type, respects .gitignore


    Parameters: ~
        {opts} (table)  options to pass to the picker

    Options: ~
        {cwd}                 (string)          root dir to search from
                                                (default: cwd, use
                                                utils.buffer_dir() to search
                                                relative to open buffer)
        {grep_open_files}     (boolean)         if true, restrict search to
                                                open files only, mutually
                                                exclusive with `search_dirs`
        {search_dirs}         (table)           directory/directories/files to
                                                search, mutually exclusive
                                                with `grep_open_files`
        {glob_pattern}        (string|table)    argument to be used with
                                                `--glob`, e.g. "*.toml", can
                                                use the opposite "!*.toml"
        {type_filter}         (string)          argument to be used with
                                                `--type`, e.g. "rust", see `rg
                                                --type-list`
        {additional_args}     (function|table)  additional arguments to be
                                                passed on. Can be fn(opts) ->
                                                tbl
        {max_results}         (number)          define a upper result value
        {disable_coordinates} (boolean)         don't show the line & row
                                                numbers (default: false)


builtin.grep_string({opts})                  *telescope.builtin.grep_string()*
    Searches for the string under your cursor in your current working directory


    Parameters: ~
        {opts} (table)  options to pass to the picker

    Options: ~
        {cwd}                 (string)          root dir to search from
                                                (default: cwd, use
                                                utils.buffer_dir() to search
                                                relative to open buffer)
        {search}              (string)          the query to search
        {grep_open_files}     (boolean)         if true, restrict search to
                                                open files only, mutually
                                                exclusive with `search_dirs`
        {search_dirs}         (table)           directory/directories/files to
                                                search, mutually exclusive
                                                with `grep_open_files`
        {use_regex}           (boolean)         if true, special characters
                                                won't be escaped, allows for
                                                using regex (default: false)
        {word_match}          (string)          can be set to `-w` to enable
                                                exact word matches
        {additional_args}     (function|table)  additional arguments to be
                                                passed on. Can be fn(opts) ->
                                                tbl
        {disable_coordinates} (boolean)         don't show the line and row
                                                numbers (default: false)
        {only_sort_text}      (boolean)         only sort the text, not the
                                                file, line or row (default:
                                                false)


builtin.find_files({opts})                    *telescope.builtin.find_files()*
    Search for files (respecting .gitignore)


    Parameters: ~
        {opts} (table)  options to pass to the picker

    Options: ~
        {cwd}              (string)          root dir to search from (default:
                                             cwd, use utils.buffer_dir() to
                                             search relative to open buffer)
        {find_command}     (function|table)  cmd to use for the search. Can be
                                             a fn(opts) -> tbl (default:
                                             autodetect)
        {follow}           (boolean)         if true, follows symlinks (i.e.
                                             uses `-L` flag for the `find`
                                             command)
        {hidden}           (boolean)         determines whether to show hidden
                                             files or not (default: false)
        {no_ignore}        (boolean)         show files ignored by .gitignore,
                                             .ignore, etc. (default: false)
        {no_ignore_parent} (boolean)         show files ignored by .gitignore,
                                             .ignore, etc. in parent dirs.
                                             (default: false)
        {search_dirs}      (table)           directory/directories/files to
                                             search
        {search_file}      (string)          specify a filename to search for


builtin.fd()                                          *telescope.builtin.fd()*
    This is an alias for the `find_files` picker



builtin.treesitter()                          *telescope.builtin.treesitter()*
    Lists function names, variables, and other symbols from treesitter queries
    - Default keymaps:
      - `<C-l>`: show autocompletion menu to prefilter your query by kind of ts
        node you want to see (i.e. `:var:`)


    Options: ~
        {show_line}         (boolean)  if true, shows the row:column that the
                                       result is found at (default: true)
        {bufnr}             (number)   specify the buffer number where
                                       treesitter should run. (default:
                                       current buffer)
        {symbol_highlights} (table)    string -> string. Matches symbol with
                                       hl_group


builtin.current_buffer_fuzzy_find({opts}) *telescope.builtin.current_buffer_fuzzy_find()*
    Live fuzzy search inside of the currently open buffer


    Parameters: ~
        {opts} (table)  options to pass to the picker

    Options: ~
        {skip_empty_lines} (boolean)  if true we dont display empty lines
                                      (default: false)


builtin.tags({opts})                                *telescope.builtin.tags()*
    Lists tags in current directory with tag location file preview (users are
    required to run ctags -R to generate tags or update when introducing new
    changes)


    Parameters: ~
        {opts} (table)  options to pass to the picker

    Options: ~
        {cwd}            (string)   root dir to search from (default: cwd, use
                                    utils.buffer_dir() to search relative to
                                    open buffer)
        {ctags_file}     (string)   specify a particular ctags file to use
        {show_line}      (boolean)  if true, shows the content of the line the
                                    tag is found on in the picker (default:
                                    true)
        {only_sort_tags} (boolean)  if true we will only sort tags (default:
                                    false)
        {fname_width}    (number)   defines the width of the filename section
                                    (default: 30)


builtin.current_buffer_tags({opts})  *telescope.builtin.current_buffer_tags()*
    Lists all of the tags for the currently open buffer, with a preview


    Parameters: ~
        {opts} (table)  options to pass to the picker

    Options: ~
        {cwd}            (string)   root dir to search from (default: cwd, use
                                    utils.buffer_dir() to search relative to
                                    open buffer)
        {ctags_file}     (string)   specify a particular ctags file to use
        {show_line}      (boolean)  if true, shows the content of the line the
                                    tag is found on in the picker (default:
                                    true)
        {only_sort_tags} (boolean)  if true we will only sort tags (default:
                                    false)
        {fname_width}    (number)   defines the width of the filename section
                                    (default: 30)


builtin.git_files({opts})                      *telescope.builtin.git_files()*
    Fuzzy search for files tracked by Git. This command lists the output of the
    `git ls-files` command, respects .gitignore
    - Default keymaps:
      - `<cr>`: opens the currently selected file


    Parameters: ~
        {opts} (table)  options to pass to the picker

    Options: ~
        {cwd}                (string)   specify the path of the repo
        {use_git_root}       (boolean)  if we should use git root as cwd or
                                        the cwd (important for submodule)
                                        (default: true)
        {show_untracked}     (boolean)  if true, adds `--others` flag to
                                        command and shows untracked files
                                        (default: false)
        {recurse_submodules} (boolean)  if true, adds the
                                        `--recurse-submodules` flag to command
                                        (default: false)
        {git_command}        (table)    command that will be exectued.
                                        {"git","ls-files","--exclude-standard","--cached"}


builtin.git_commits({opts})                  *telescope.builtin.git_commits()*
    Lists commits for current directory with diff preview
    - Default keymaps:
      - `<cr>`: checks out the currently selected commit
      - `<C-r>m`: resets current branch to selected commit using mixed mode
      - `<C-r>s`: resets current branch to selected commit using soft mode
      - `<C-r>h`: resets current branch to selected commit using hard mode


    Parameters: ~
        {opts} (table)  options to pass to the picker

    Options: ~
        {cwd}          (string)   specify the path of the repo
        {use_git_root} (boolean)  if we should use git root as cwd or the cwd
                                  (important for submodule) (default: true)
        {git_command}  (table)    command that will be exectued.
                                  {"git","log","--pretty=oneline","--abbrev-commit","--","."}


builtin.git_bcommits({opts})                *telescope.builtin.git_bcommits()*
    Lists commits for current buffer with diff preview
    - Default keymaps or your overriden `select_` keys:
      - `<cr>`: checks out the currently selected commit
      - `<c-v>`: opens a diff in a vertical split
      - `<c-x>`: opens a diff in a horizontal split
      - `<c-t>`: opens a diff in a new tab


    Parameters: ~
        {opts} (table)  options to pass to the picker

    Options: ~
        {cwd}          (string)   specify the path of the repo
        {use_git_root} (boolean)  if we should use git root as cwd or the cwd
                                  (important for submodule) (default: true)
        {current_file} (string)   specify the current file that should be used
                                  for bcommits (default: current buffer)
        {git_command}  (table)    command that will be exectued.
                                  {"git","log","--pretty=oneline","--abbrev-commit"}


builtin.git_branches({opts})                *telescope.builtin.git_branches()*
    List branches for current directory, with output from `git log --oneline`
    shown in the preview window
    - Default keymaps:
      - `<cr>`: checks out the currently selected branch
      - `<C-t>`: tracks currently selected branch
      - `<C-r>`: rebases currently selected branch
      - `<C-a>`: creates a new branch, with confirmation prompt before creation
      - `<C-d>`: deletes the currently selected branch, with confirmation
        prompt before deletion
      - `<C-y>`: merges the currently selected branch, with confirmation prompt
        before deletion


    Parameters: ~
        {opts} (table)  options to pass to the picker

    Options: ~
        {cwd}          (string)   specify the path of the repo
        {use_git_root} (boolean)  if we should use git root as cwd or the cwd
                                  (important for submodule) (default: true)
        {pattern}      (string)   specify the pattern to match all refs


builtin.git_status({opts})                    *telescope.builtin.git_status()*
    Lists git status for current directory
    - Default keymaps:
      - `<Tab>`: stages or unstages the currently selected file
      - `<cr>`: opens the currently selected file


    Parameters: ~
        {opts} (table)  options to pass to the picker

    Options: ~
        {cwd}          (string)   specify the path of the repo
        {use_git_root} (boolean)  if we should use git root as cwd or the cwd
                                  (important for submodule) (default: true)
        {git_icons}    (table)    string -> string. Matches name with icon
                                  (see source code, make_entry.lua
                                  git_icon_defaults)


builtin.git_stash({opts})                      *telescope.builtin.git_stash()*
    Lists stash items in current repository
    - Default keymaps:
      - `<cr>`: runs `git apply` for currently selected stash


    Parameters: ~
        {opts} (table)  options to pass to the picker

    Options: ~
        {cwd}          (string)   specify the path of the repo
        {use_git_root} (boolean)  if we should use git root as cwd or the cwd
                                  (important for submodule) (default: true)
        {show_branch}  (boolean)  if we should display the branch name for git
                                  stash entries (default: true)


builtin.builtin({opts})                          *telescope.builtin.builtin()*
    Lists all of the community maintained pickers built into Telescope


    Parameters: ~
        {opts} (table)  options to pass to the picker

    Options: ~
        {include_extensions} (boolean)  if true will show the pickers of the
                                        installed extensions (default: false)
        {use_default_opts}   (boolean)  if the selected picker should use its
                                        default options (default: false)


builtin.resume({opts})                            *telescope.builtin.resume()*
    Opens the previous picker in the identical state (incl. multi selections)
    - Notes:
      - Requires `cache_picker` in setup or when having invoked pickers, see
        |telescope.defaults.cache_picker|


    Parameters: ~
        {opts} (table)  options to pass to the picker

    Options: ~
        {cache_index} (number)  what picker to resume, where 1 denotes most
                                recent (default: 1)


builtin.pickers({opts})                          *telescope.builtin.pickers()*
    Opens a picker over previously cached pickers in their preserved states
    (incl. multi selections)
    - Default keymaps:
      - `<C-x>`: delete the selected cached picker
    - Notes:
      - Requires `cache_picker` in setup or when having invoked pickers, see
        |telescope.defaults.cache_picker|


    Parameters: ~
        {opts} (table)  options to pass to the picker


builtin.planets({opts})                          *telescope.builtin.planets()*
    Use the telescope...


    Parameters: ~
        {opts} (table)  options to pass to the picker

    Options: ~
        {show_pluto} (boolean)  we love pluto (default: false, because its a
                                hidden feature)
        {show_moon}  (boolean)  we love the moon (default: false, because its
                                a hidden feature)


builtin.symbols({opts})                          *telescope.builtin.symbols()*
    Lists symbols inside of `data/telescope-sources/*.json` found in your
    runtime path or found in `stdpath("data")/telescope/symbols/*.json`. The
    second path can be customized. We provide a couple of default symbols which
    can be found in https://github.com/nvim-telescope/telescope-symbols.nvim.
    This repos README also provides more information about the format in which
    the symbols have to be.


    Parameters: ~
        {opts} (table)  options to pass to the picker

    Options: ~
        {symbol_path} (string)  specify the second path. Default:
                                `stdpath("data")/telescope/symbols/*.json`
        {sources}     (table)   specify a table of sources you want to load
                                this time


builtin.commands({opts})                        *telescope.builtin.commands()*
    Lists available plugin/user commands and runs them on `<cr>`


    Parameters: ~
        {opts} (table)  options to pass to the picker

    Options: ~
        {show_buf_command} (boolean)  show buf local command (Default: true)


builtin.quickfix({opts})                        *telescope.builtin.quickfix()*
    Lists items in the quickfix list, jumps to location on `<cr>`


    Parameters: ~
        {opts} (table)  options to pass to the picker

    Options: ~
        {show_line}   (boolean)  show results text (default: true)
        {trim_text}   (boolean)  trim results text (default: false)
        {fname_width} (number)   defines the width of the filename section
                                 (default: 30)
        {nr}          (number)   specify the quickfix list number


builtin.quickfixhistory({opts})          *telescope.builtin.quickfixhistory()*
    Lists all quickfix lists in your history and open them with
    `builtin.quickfix`. It seems that neovim only keeps the full history for 10
    lists


    Parameters: ~
        {opts} (table)  options to pass to the picker


builtin.loclist({opts})                          *telescope.builtin.loclist()*
    Lists items from the current window's location list, jumps to location on
    `<cr>`


    Parameters: ~
        {opts} (table)  options to pass to the picker

    Options: ~
        {show_line}   (boolean)  show results text (default: true)
        {trim_text}   (boolean)  trim results text (default: false)
        {fname_width} (number)   defines the width of the filename section
                                 (default: 30)


builtin.oldfiles({opts})                        *telescope.builtin.oldfiles()*
    Lists previously open files, opens on `<cr>`


    Parameters: ~
        {opts} (table)  options to pass to the picker

    Options: ~
        {only_cwd} (boolean)  show only files in the cwd (default: false)
        {cwd_only} (boolean)  alias for only_cwd


builtin.command_history({opts})          *telescope.builtin.command_history()*
    Lists commands that were executed recently, and reruns them on `<cr>`
    - Default keymaps:
      - `<C-e>`: open the command line with the text of the currently selected
        result populated in it


    Parameters: ~
        {opts} (table)  options to pass to the picker


builtin.search_history({opts})            *telescope.builtin.search_history()*
    Lists searches that were executed recently, and reruns them on `<cr>`
    - Default keymaps:
      - `<C-e>`: open a search window with the text of the currently selected
        search result populated in it


    Parameters: ~
        {opts} (table)  options to pass to the picker


builtin.vim_options({opts})                  *telescope.builtin.vim_options()*
    Lists vim options, allows you to edit the current value on `<cr>`


    Parameters: ~
        {opts} (table)  options to pass to the picker


builtin.help_tags({opts})                      *telescope.builtin.help_tags()*
    Lists available help tags and opens a new window with the relevant help
    info on `<cr>`


    Parameters: ~
        {opts} (table)  options to pass to the picker

    Options: ~
        {lang}     (string)   specify language (default: vim.o.helplang)
        {fallback} (boolean)  fallback to en if language isn't installed
                              (default: true)


builtin.man_pages({opts})                      *telescope.builtin.man_pages()*
    Lists manpage entries, opens them in a help window on `<cr>`


    Parameters: ~
        {opts} (table)  options to pass to the picker

    Options: ~
        {sections} (table)     a list of sections to search, use `{ "ALL" }`
                               to search in all sections (default: { "1" })
        {man_cmd}  (function)  that returns the man command. (Default:
                               `apropos ""` on linux, `apropos " "` on macos)


builtin.reloader({opts})                        *telescope.builtin.reloader()*
    Lists lua modules and reloads them on `<cr>`


    Parameters: ~
        {opts} (table)  options to pass to the picker

    Options: ~
        {column_len} (number)  define the max column len for the module name
                               (default: dynamic, longest module name)


builtin.buffers({opts})                          *telescope.builtin.buffers()*
    Lists open buffers in current neovim instance, opens selected buffer on
    `<cr>`


    Parameters: ~
        {opts} (table)  options to pass to the picker

    Options: ~
        {show_all_buffers}      (boolean)  if true, show all buffers,
                                           including unloaded buffers
                                           (default: true)
        {ignore_current_buffer} (boolean)  if true, don't show the current
                                           buffer in the list (default: false)
        {only_cwd}              (boolean)  if true, only show buffers in the
                                           current working directory (default:
                                           false)
        {cwd_only}              (boolean)  alias for only_cwd
        {sort_lastused}         (boolean)  Sorts current and last buffer to
                                           the top and selects the lastused
                                           (default: false)
        {sort_mru}              (boolean)  Sorts all buffers after most recent
                                           used. Not just the current and last
                                           one (default: false)
        {bufnr_width}           (number)   Defines the width of the buffer
                                           numbers in front of the filenames 
                                           (default: dynamic)


builtin.colorscheme({opts})                  *telescope.builtin.colorscheme()*
    Lists available colorschemes and applies them on `<cr>`


    Parameters: ~
        {opts} (table)  options to pass to the picker

    Options: ~
        {enable_preview} (boolean)  if true, will preview the selected color


builtin.marks({opts})                              *telescope.builtin.marks()*
    Lists vim marks and their value, jumps to the mark on `<cr>`


    Parameters: ~
        {opts} (table)  options to pass to the picker


builtin.registers({opts})                      *telescope.builtin.registers()*
    Lists vim registers, pastes the contents of the register on `<cr>`
    - Default keymaps:
      - `<C-e>`: edit the contents of the currently selected register


    Parameters: ~
        {opts} (table)  options to pass to the picker


builtin.keymaps({opts})                          *telescope.builtin.keymaps()*
    Lists normal mode keymappings, runs the selected keymap on `<cr>`


    Parameters: ~
        {opts} (table)  options to pass to the picker

    Options: ~
        {modes}     (table)    a list of short-named keymap modes to search
                               (default: { "n", "i", "c", "x" })
        {show_plug} (boolean)  if true, the keymaps for which the lhs contains
                               "<Plug>" are also shown (default: true)


builtin.filetypes({opts})                      *telescope.builtin.filetypes()*
    Lists all available filetypes, sets currently open buffer's filetype to
    selected filetype in Telescope on `<cr>`


    Parameters: ~
        {opts} (table)  options to pass to the picker


builtin.highlights({opts})                    *telescope.builtin.highlights()*
    Lists all available highlights


    Parameters: ~
        {opts} (table)  options to pass to the picker


builtin.autocommands({opts})                *telescope.builtin.autocommands()*
    Lists vim autocommands and goes to their declaration on `<cr>`


    Parameters: ~
        {opts} (table)  options to pass to the picker


builtin.spell_suggest({opts})              *telescope.builtin.spell_suggest()*
    Lists spelling suggestions for the current word under the cursor, replaces
    word with selected suggestion on `<cr>`


    Parameters: ~
        {opts} (table)  options to pass to the picker


builtin.tagstack({opts})                        *telescope.builtin.tagstack()*
    Lists the tag stack for the current window, jumps to tag on `<cr>`


    Parameters: ~
        {opts} (table)  options to pass to the picker

    Options: ~
        {show_line}   (boolean)  show results text (default: true)
        {trim_text}   (boolean)  trim results text (default: false)
        {fname_width} (number)   defines the width of the filename section
                                 (default: 30)


builtin.jumplist({opts})                        *telescope.builtin.jumplist()*
    Lists items from Vim's jumplist, jumps to location on `<cr>`


    Parameters: ~
        {opts} (table)  options to pass to the picker

    Options: ~
        {show_line}   (boolean)  show results text (default: true)
        {trim_text}   (boolean)  trim results text (default: false)
        {fname_width} (number)   defines the width of the filename section
                                 (default: 30)


builtin.lsp_references({opts})            *telescope.builtin.lsp_references()*
    Lists LSP references for word under the cursor, jumps to reference on
    `<cr>`


    Parameters: ~
        {opts} (table)  options to pass to the picker

    Options: ~
        {include_declaration}  (boolean)  include symbol declaration in the
                                          lsp references (default: true)
        {include_current_line} (boolean)  include current line (default:
                                          false)
        {fname_width}          (number)   defines the width of the filename
                                          section (default: 30)
        {show_line}            (boolean)  show results text (default: true)
        {trim_text}            (boolean)  trim results text (default: false)


builtin.lsp_incoming_calls({opts})    *telescope.builtin.lsp_incoming_calls()*
    Lists LSP incoming calls for word under the cursor, jumps to reference on
    `<cr>`


    Parameters: ~
        {opts} (table)  options to pass to the picker

    Options: ~
        {fname_width} (number)   defines the width of the filename section
                                 (default: 30)
        {show_line}   (boolean)  show results text (default: true)
        {trim_text}   (boolean)  trim results text (default: false)


builtin.lsp_outgoing_calls({opts})    *telescope.builtin.lsp_outgoing_calls()*
    Lists LSP outgoing calls for word under the cursor, jumps to reference on
    `<cr>`


    Parameters: ~
        {opts} (table)  options to pass to the picker

    Options: ~
        {fname_width} (number)   defines the width of the filename section
                                 (default: 30)
        {show_line}   (boolean)  show results text (default: true)
        {trim_text}   (boolean)  trim results text (default: false)


builtin.lsp_definitions({opts})          *telescope.builtin.lsp_definitions()*
    Goto the definition of the word under the cursor, if there's only one,
    otherwise show all options in Telescope


    Parameters: ~
        {opts} (table)  options to pass to the picker

    Options: ~
        {jump_type}   (string)   how to goto definition if there is only one,
                                 values: "tab", "split", "vsplit", "never"
        {fname_width} (number)   defines the width of the filename section
                                 (default: 30)
        {show_line}   (boolean)  show results text (default: true)
        {trim_text}   (boolean)  trim results text (default: false)


builtin.lsp_type_definitions({opts}) *telescope.builtin.lsp_type_definitions()*
    Goto the definition of the type of the word under the cursor, if there's
    only one, otherwise show all options in Telescope


    Parameters: ~
        {opts} (table)  options to pass to the picker

    Options: ~
        {jump_type}   (string)   how to goto definition if there is only one,
                                 values: "tab", "split", "vsplit", "never"
        {fname_width} (number)   defines the width of the filename section
                                 (default: 30)
        {show_line}   (boolean)  show results text (default: true)
        {trim_text}   (boolean)  trim results text (default: false)


builtin.lsp_implementations({opts})  *telescope.builtin.lsp_implementations()*
    Goto the implementation of the word under the cursor if there's only one,
    otherwise show all options in Telescope


    Parameters: ~
        {opts} (table)  options to pass to the picker

    Options: ~
        {jump_type}   (string)   how to goto implementation if there is only
                                 one, values: "tab", "split", "vsplit",
                                 "never"
        {fname_width} (number)   defines the width of the filename section
                                 (default: 30)
        {show_line}   (boolean)  show results text (default: true)
        {trim_text}   (boolean)  trim results text (default: false)


builtin.lsp_document_symbols({opts}) *telescope.builtin.lsp_document_symbols()*
    Lists LSP document symbols in the current buffer
    - Default keymaps:
      - `<C-l>`: show autocompletion menu to prefilter your query by type of
        symbol you want to see (i.e. `:variable:`)


    Parameters: ~
        {opts} (table)  options to pass to the picker

    Options: ~
        {fname_width}       (number)        defines the width of the filename
                                            section (default: 30)
        {show_line}         (boolean)       if true, shows the content of the
                                            line the tag is found on (default:
                                            false)
        {symbols}           (string|table)  filter results by symbol kind(s)
        {ignore_symbols}    (string|table)  list of symbols to ignore
        {symbol_highlights} (table)         string -> string. Matches symbol
                                            with hl_group


builtin.lsp_workspace_symbols({opts}) *telescope.builtin.lsp_workspace_symbols()*
    Lists LSP document symbols in the current workspace
    - Default keymaps:
      - `<C-l>`: show autocompletion menu to prefilter your query by type of
        symbol you want to see (i.e. `:variable:`)


    Parameters: ~
        {opts} (table)  options to pass to the picker

    Options: ~
        {query}             (string)        for what to query the workspace
                                            (default: "")
        {fname_width}       (number)        defines the width of the filename
                                            section (default: 30)
        {show_line}         (boolean)       if true, shows the content of the
                                            line the tag is found on (default:
                                            false)
        {symbols}           (string|table)  filter results by symbol kind(s)
        {ignore_symbols}    (string|table)  list of symbols to ignore
        {symbol_highlights} (table)         string -> string. Matches symbol
                                            with hl_group


builtin.lsp_dynamic_workspace_symbols({opts}) *telescope.builtin.lsp_dynamic_workspace_symbols()*
    Dynamically lists LSP for all workspace symbols
    - Default keymaps:
      - `<C-l>`: show autocompletion menu to prefilter your query by type of
        symbol you want to see (i.e. `:variable:`)


    Parameters: ~
        {opts} (table)  options to pass to the picker

    Options: ~
        {fname_width}       (number)        defines the width of the filename
                                            section (default: 30)
        {show_line}         (boolean)       if true, shows the content of the
                                            line the symbol is found on
                                            (default: false)
        {symbols}           (string|table)  filter results by symbol kind(s)
        {ignore_symbols}    (string|table)  list of symbols to ignore
        {symbol_highlights} (table)         string -> string. Matches symbol
                                            with hl_group


builtin.diagnostics({opts})                  *telescope.builtin.diagnostics()*
    Lists diagnostics
    - Fields:
      - `All severity flags can be passed as `string` or `number` as per
        `:vim.diagnostic.severity:`
    - Default keymaps:
      - `<C-l>`: show autocompletion menu to prefilter your query with the
        diagnostic you want to see (i.e. `:warning:`)


    Parameters: ~
        {opts} (table)  options to pass to the picker

    Options: ~
        {bufnr}          (number|nil)      Buffer number to get diagnostics
                                           from. Use 0 for current buffer or
                                           nil for all buffers
        {severity}       (string|number)   filter diagnostics by severity name
                                           (string) or id (number)
        {severity_limit} (string|number)   keep diagnostics equal or more
                                           severe wrt severity name (string)
                                           or id (number)
        {severity_bound} (string|number)   keep diagnostics equal or less
                                           severe wrt severity name (string)
                                           or id (number)
        {root_dir}       (string|boolean)  if set to string, get diagnostics
                                           only for buffers under this dir
                                           otherwise cwd
        {no_unlisted}    (boolean)         if true, get diagnostics only for
                                           listed buffers
        {no_sign}        (boolean)         hide DiagnosticSigns from Results
                                           (default: false)
        {line_width}     (number)          set length of diagnostic entry text
                                           in Results
        {namespace}      (number)          limit your diagnostics to a
                                           specific namespace



================================================================================
THEMES                                                        *telescope.themes*

Themes are ways to combine several elements of styling together.

They are helpful for managing the several different UI aspects for telescope
and provide a simple interface for users to get a particular "style" of picker.

themes.get_dropdown()                        *telescope.themes.get_dropdown()*
    Dropdown style theme.

    Usage:
    >
        `local builtin = require('telescope.builtin')`
        `local themes = require('telescope.themes')`
        `builtin.find_files(themes.get_dropdown())`
<



themes.get_cursor()                            *telescope.themes.get_cursor()*
    Cursor style theme.

    Usage:
    >

        `local builtin = require('telescope.builtin')`
        `local themes = require('telescope.themes')`
        `builtin.lsp_references(themes.get_cursor())`
<



themes.get_ivy()                                  *telescope.themes.get_ivy()*
    Ivy style theme.

    Usage:
    >
        `local builtin = require('telescope.builtin')`
        `local themes = require('telescope.themes')`
        `builtin.find_files(themes.get_ivy())`
<




================================================================================
MAPPINGS                                                    *telescope.mappings*

|telescope.mappings| is used to configure the keybindings within a telescope
picker. These keybinds are only local to the picker window and will be cleared
once you exit the picker.

We provide multiple different ways of configuring, as described below, to
provide an easy to use experience for changing the default behavior of
telescope or extending for your own purposes.

To see many of the builtin actions that you can use as values for this table,
see |telescope.actions|

Format is:
>
  {
    mode = { ..keys }
  }
<

where {mode} is the one character letter for a mode ('i' for insert, 'n' for
normal).

For example:
>
  mappings = {
    i = {
      ["<esc>"] = require('telescope.actions').close,
    },
  }
<

To disable a keymap, put `[map] = false`
For example:
>
  {
    ...,
    ["<C-n>"] = false,
    ...,
  }
<
Into your config.

To override behavior of a key, simply set the value to be a function (either by
requiring an action or by writing your own function)
>
  {
    ...,
    ["<C-i>"] = require('telescope.actions').select_default,
    ...,
  }
<

If the function you want is part of `telescope.actions`, then you can simply
give a string. For example, the previous option is equivalent to:
>
  {
    ...,
    ["<C-i>"] = "select_default",
    ...,
  }
<

You can also add other mappings using tables with `type = "command"`. For
example:
>
  {
    ...,
    ["jj"] = { "<esc>", type = "command" },
    ["kk"] = { "<cmd>echo \"Hello, World!\"<cr>", type = "command" },)
    ...,
  }
<

You can also add additional options for mappings of any type ("action" and
"command"). For example:
>
  {
    ...,
    ["<C-j>"] = {
      actions.move_selection_next, type = "action",
      opts = { nowait = true, silent = true }
    },
    ...,
  }
<

There are three main places you can configure |telescope.mappings|. These are
ordered from the lowest priority to the highest priority.

1. |telescope.defaults.mappings|
2. In the |telescope.setup()| table, inside a picker with a given name, use the
   `mappings` key
>
  require("telescope").setup {
    pickers = {
      find_files = {
        mappings = {
          n = {
            ["kj"] = "close",
          },
        },
      },
    },
  }
<
3. `attach_mappings` function for a particular picker.
>
  require("telescope.builtin").find_files {
    attach_mappings = function(_, map)
      map("i", "asdf", function(_prompt_bufnr)
        print "You typed asdf"
      end)
      -- needs to return true if you want to map default_mappings and
      -- false if not
      return true
    end,
  }
<


================================================================================
LAYOUT                                                        *telescope.layout*

The layout of telescope pickers can be adjusted using the
|telescope.defaults.layout_strategy| and |telescope.defaults.layout_config|
options. For example, the following configuration changes the default layout
strategy and the default size of the picker:
>
  require('telescope').setup{
    defaults = {
      layout_strategy = 'vertical',
      layout_config = { height = 0.95 },
    },
  }
<


────────────────────────────────────────────────────────────────────────────────

Layout strategies are different functions to position telescope.

All layout strategies are functions with the following signature:

>
  function(picker, columns, lines, layout_config)
    -- Do some calculations here...
    return {
      preview = preview_configuration
      results = results_configuration,
      prompt = prompt_configuration,
    }
  end
<

  Parameters: ~
    - picker        : A Picker object. (docs coming soon)
    - columns       : (number) Columns in the vim window
    - lines         : (number) Lines in the vim window
    - layout_config : (table) The configuration values specific to the picker.


This means you can create your own layout strategy if you want! Just be aware
for now that we may change some APIs or interfaces, so they may break if you
create your own.

A good method for creating your own would be to copy one of the strategies that
most resembles what you want from
"./lua/telescope/pickers/layout_strategies.lua" in the telescope repo.


layout_strategies.horizontal()                 *telescope.layout.horizontal()*
    Horizontal layout has two columns, one for the preview and one for the
    prompt and results.

    ┌──────────────────────────────────────────────────┐
    │                                                  │
    │    ┌───────────────────┐┌───────────────────┐    │
    │    │                   ││                   │    │
    │    │                   ││                   │    │
    │    │                   ││                   │    │
    │    │      Results      ││                   │    │
    │    │                   ││      Preview      │    │
    │    │                   ││                   │    │
    │    │                   ││                   │    │
    │    └───────────────────┘│                   │    │
    │    ┌───────────────────┐│                   │    │
    │    │      Prompt       ││                   │    │
    │    └───────────────────┘└───────────────────┘    │
    │                                                  │
    └──────────────────────────────────────────────────┘

    `picker.layout_config` shared options:
      - anchor:
        - Which edge/corner to pin the picker to
        - See |resolver.resolve_anchor_pos()|
      - height:
        - How tall to make Telescope's entire layout
        - See |resolver.resolve_height()|
      - mirror: Flip the location of the results/prompt and preview windows
      - prompt_position:
        - Where to place prompt window.
        - Available Values: 'bottom', 'top'
      - scroll_speed: The number of lines to scroll through the previewer
      - width:
        - How wide to make Telescope's entire layout
        - See |resolver.resolve_width()|

    `picker.layout_config` unique options:
      - preview_cutoff: When columns are less than this value, the preview will be disabled
      - preview_width:
        - Change the width of Telescope's preview window
        - See |resolver.resolve_width()|


layout_strategies.center()                         *telescope.layout.center()*
    Centered layout with a combined block of the prompt and results aligned to
    the middle of the screen. The preview window is then placed in the
    remaining space above or below, according to `anchor` or `mirror`.
    Particularly useful for creating dropdown menus (see |telescope.themes| and
    |themes.get_dropdown()|).

    Note that vertical anchoring, i.e. `anchor` containing `"N"` or `"S"`, will
    override `mirror` config. For `"N"` anchoring preview will be placed below
    prompt/result block. For `"S"` anchoring preview will be placed above
    prompt/result block. For horizontal only anchoring preview will be placed
    according to `mirror` config, default is above the prompt/result block.

    ┌──────────────────────────────────────────────────┐
    │    ┌────────────────────────────────────────┐    │
    │    |                 Preview                |    │
    │    |                 Preview                |    │
    │    └────────────────────────────────────────┘    │
    │    ┌────────────────────────────────────────┐    │
    │    |                 Prompt                 |    │
    │    ├────────────────────────────────────────┤    │
    │    |                 Result                 |    │
    │    |                 Result                 |    │
    │    └────────────────────────────────────────┘    │
    │                                                  │
    │                                                  │
    │                                                  │
    │                                                  │
    └──────────────────────────────────────────────────┘

    `picker.layout_config` shared options:
      - anchor:
        - Which edge/corner to pin the picker to
        - See |resolver.resolve_anchor_pos()|
      - height:
        - How tall to make Telescope's entire layout
        - See |resolver.resolve_height()|
      - mirror: Flip the location of the results/prompt and preview windows
      - prompt_position:
        - Where to place prompt window.
        - Available Values: 'bottom', 'top'
      - scroll_speed: The number of lines to scroll through the previewer
      - width:
        - How wide to make Telescope's entire layout
        - See |resolver.resolve_width()|

    `picker.layout_config` unique options:
      - preview_cutoff: When lines are less than this value, the preview will be disabled


layout_strategies.cursor()                         *telescope.layout.cursor()*
    Cursor layout dynamically positioned below the cursor if possible. If there
    is no place below the cursor it will be placed above.

    ┌──────────────────────────────────────────────────┐
    │                                                  │
    │   █                                              │
    │   ┌──────────────┐┌─────────────────────┐        │
    │   │    Prompt    ││      Preview        │        │
    │   ├──────────────┤│      Preview        │        │
    │   │    Result    ││      Preview        │        │
    │   │    Result    ││      Preview        │        │
    │   └──────────────┘└─────────────────────┘        │
    │                                         █        │
    │                                                  │
    │                                                  │
    │                                                  │
    │                                                  │
    │                                                  │
    └──────────────────────────────────────────────────┘



layout_strategies.vertical()                     *telescope.layout.vertical()*
    Vertical layout stacks the items on top of each other. Particularly useful
    with thinner windows.

    ┌──────────────────────────────────────────────────┐
    │                                                  │
    │    ┌────────────────────────────────────────┐    │
    │    |                 Preview                |    │
    │    |                 Preview                |    │
    │    |                 Preview                |    │
    │    └────────────────────────────────────────┘    │
    │    ┌────────────────────────────────────────┐    │
    │    |                 Result                 |    │
    │    |                 Result                 |    │
    │    └────────────────────────────────────────┘    │
    │    ┌────────────────────────────────────────┐    │
    │    |                 Prompt                 |    │
    │    └────────────────────────────────────────┘    │
    │                                                  │
    └──────────────────────────────────────────────────┘

    `picker.layout_config` shared options:
      - anchor:
        - Which edge/corner to pin the picker to
        - See |resolver.resolve_anchor_pos()|
      - height:
        - How tall to make Telescope's entire layout
        - See |resolver.resolve_height()|
      - mirror: Flip the location of the results/prompt and preview windows
      - prompt_position:
        - Where to place prompt window.
        - Available Values: 'bottom', 'top'
      - scroll_speed: The number of lines to scroll through the previewer
      - width:
        - How wide to make Telescope's entire layout
        - See |resolver.resolve_width()|

    `picker.layout_config` unique options:
      - preview_cutoff: When lines are less than this value, the preview will be disabled
      - preview_height:
        - Change the height of Telescope's preview window
        - See |resolver.resolve_height()|


layout_strategies.flex()                             *telescope.layout.flex()*
    Flex layout swaps between `horizontal` and `vertical` strategies based on
    the window width
     - Supports |layout_strategies.vertical| or |layout_strategies.horizontal|
       features


    `picker.layout_config` shared options:
      - anchor:
        - Which edge/corner to pin the picker to
        - See |resolver.resolve_anchor_pos()|
      - height:
        - How tall to make Telescope's entire layout
        - See |resolver.resolve_height()|
      - mirror: Flip the location of the results/prompt and preview windows
      - prompt_position:
        - Where to place prompt window.
        - Available Values: 'bottom', 'top'
      - scroll_speed: The number of lines to scroll through the previewer
      - width:
        - How wide to make Telescope's entire layout
        - See |resolver.resolve_width()|

    `picker.layout_config` unique options:
      - flip_columns: The number of columns required to move to horizontal mode
      - flip_lines: The number of lines required to move to horizontal mode
      - horizontal: Options to pass when switching to horizontal layout
      - vertical: Options to pass when switching to vertical layout


layout_strategies.bottom_pane()               *telescope.layout.bottom_pane()*
    Bottom pane can be used to create layouts similar to "ivy".

    For an easy ivy configuration, see |themes.get_ivy()|




================================================================================
RESOLVE                                                      *telescope.resolve*

Provides "resolver functions" to allow more customisable inputs for options.

resolver.resolve_height()                 *telescope.resolve.resolve_height()*
    Converts input to a function that returns the height. The input must take
    one of five forms:
    1. 0 <= number < 1
       This means total height as a percentage.
    2. 1 <= number
       This means total height as a fixed number.
    3. function
       Must have signature: function(self, max_columns, max_lines): number
    4. table of the form: { val, max = ..., min = ... }
       val has to be in the first form 0 <= val < 1 and only one is given, 
       `min` or `max` as fixed number
    5. table of the form: {padding = `foo`}
       where `foo` has one of the previous three forms.
       The height is then set to be the remaining space after padding. For
       example, if the window has height 50, and the input is {padding = 5}, 
       the height returned will be `40 = 50 - 2*5`

    The returned function will have signature: function(self, max_columns,
    max_lines): number



resolver.resolve_width()                   *telescope.resolve.resolve_width()*
    Converts input to a function that returns the width. The input must take
    one of five forms:
    1. 0 <= number < 1
       This means total width as a percentage.
    2. 1 <= number
       This means total width as a fixed number.
    3. function
       Must have signature: function(self, max_columns, max_lines): number
    4. table of the form: { val, max = ..., min = ... }
       val has to be in the first form 0 <= val < 1 and only one is given, 
       `min` or `max` as fixed number
    5. table of the form: {padding = `foo`}
       where `foo` has one of the previous three forms.
       The width is then set to be the remaining space after padding. For
       example, if the window has width 100, and the input is {padding = 5}, 
       the width returned will be `90 = 100 - 2*5`

    The returned function will have signature: function(self, max_columns,
    max_lines): number



resolver.resolve_anchor_pos()         *telescope.resolve.resolve_anchor_pos()*
    Calculates the adjustment required to move the picker from the middle of
    the screen to an edge or corner.
    The `anchor` can be any of the following strings:
      - "", "CENTER", "NW", "N", "NE", "E", "SE", "S", "SW", "W" The anchors
        have the following meanings:
      - "" or "CENTER":
        the picker will remain in the middle of the screen.
      - Compass directions:
        the picker will move to the corresponding edge/corner e.g. "NW" -> "top
        left corner", "E" -> "right edge", "S" -> "bottom edge"




================================================================================
MAKE_ENTRY                                                *telescope.make_entry*

Each picker has a finder made up of two parts, the results which are the data
to be displayed, and the entry_maker. These entry_makers are functions returned
from make_entry functions. These will be referrd to as entry_makers in the
following documentation.

Every entry maker returns a function which accepts the data to be used for an
entry. This function will return an entry table (or nil, meaning skip this
entry) which contains of the - following important keys:
- value any: value key can be anything but still required
- valid bool: is an optional key because it defaults to true but if the key is
  set to false it will not be displayed by the picker. (optional)
- ordinal string: is the text that is used for filtering (required)
- display string|function: is either a string of the text that is being 
  displayed or a function receiving the entry at a later stage, when the entry 
  is actually being displayed. A function can be useful here if complex 
  calculation have to be done. `make_entry` can also return a second value a
  highlight array which will then apply to the line. Highlight entry in this
  array has the following signature `{ { start_col, end_col }, hl_group }` 
  (required).
- filename string: will be interpreted by the default `<cr>` action as open
  this file (optional)
- bufnr number: will be interpreted by the default `<cr>` action as open this
  buffer (optional)
- lnum number: lnum value which will be interpreted by the default `<cr>` 
  action as a jump to this line (optional)
- col number: col value which will be interpreted by the default `<cr>` action
  as a jump to this column (optional)

More information on easier displaying, see |telescope.pickers.entry_display|

TODO: Document something we call `entry_index`


================================================================================
ENTRY_DISPLAY                                  *telescope.pickers.entry_display*

Entry Display is used to format each entry shown in the result panel.

Entry Display create() will give us a function based on the configuration of
column widths we pass into it. We then can use this function n times to return
a string based on structured input.

Note that if you call `create()` inside `make_display` it will be called for
every single entry. So it is suggested to do this outside of `make_display` for
the best performance.

The create function will use the column widths passed to it in
configaration.items. Each item in that table is the number of characters in the
column. It's also possible for the final column to not have a fixed width, this
will be shown in the configuartion as 'remaining = true'.

An example of this configuration is shown for the buffers picker
>
local displayer = entry_display.create {
  separator = " ",
  items = {
    { width = opts.bufnr_width },
    { width = 4 },
    { width = icon_width },
    { remaining = true },
  },
}
<

This shows 4 columns, the first is defined in the opts as the width we'll use
when display_string the number of the buffer. The second has a fixed width of 4
and the 3rd column's widht will be decided by the width of the icons we use.
The fourth column will use the remaining space. Finally we have also defined
the seperator between each column will be the space " ".

An example of how the display reference will be used is shown, again for the
buffers picker:
>
return displayer {
  { entry.bufnr, "TelescopeResultsNumber" },
  { entry.indicator, "TelescopeResultsComment" },
  { icon, hl_group },
  display_bufname .. ":" .. entry.lnum,
}
<

There are two types of values each column can have. Either a simple String or a
table containing the String as well as the hl_group.

The displayer can return values, string and an optional highlights. String is
all the text to be displayed for this entry as a single string. If parts of the
string are to be highlighted they will be described in the highlights table.

For better understanding of how create() and displayer are used it's best to
look at the code in make_entry.lua.


================================================================================
UTILS                                                          *telescope.utils*

Utilities for writing telescope pickers

utils.transform_path({opts}, {path})        *telescope.utils.transform_path()*
    Transform path is a util function that formats a path based on path_display
    found in `opts` or the default value from config. It is meant to be used in
    make_entry to have a uniform interface for builtins as well as extensions
    utilizing the same user configuration Note: It is only supported inside
    `make_entry`/`make_display` the use of this function outside of telescope
    might yield to undefined behavior and will not be addressed by us


    Parameters: ~
        {opts} (table)   The opts the users passed into the picker. Might
                         contains a path_display key
        {path} (string)  The path that should be formated

    Return: ~
        string: The transformed path ready to be displayed


utils.notify({funname}, {opts})                     *telescope.utils.notify()*
    Telescope Wrapper around vim.notify


    Parameters: ~
        {funname} (string)  name of the function that will be
        {opts}    (table)   opts.level string, opts.msg string, opts.once bool



================================================================================
ACTIONS                                                      *telescope.actions*

Actions functions that are useful for people creating their own mappings.

Actions can be either normal functions that expect the prompt_bufnr as first
argument (1) or they can be a custom telescope type called "action" (2).

(1) The `prompt_bufnr` of a normal function denotes the identifier of your
picker which can be used to access the picker state. In practice, users most
commonly access from both picker and global state via the following:
>
  -- for utility functions
  local action_state = require "telescope.actions.state"

  local actions = {}
  actions.do_stuff = function(prompt_bufnr)
    local current_picker = action_state.get_current_picker(prompt_bufnr) -- picker state
    local entry = action_state.get_selected_entry()
  end
<

See |telescope.actions.state| for more information.

(2) To transform a module of functions into a module of "action"s, you need to
do the following:
>
  local transform_mod = require("telescope.actions.mt").transform_mod

  local mod = {}
  mod.a1 = function(prompt_bufnr)
    -- your code goes here
    -- You can access the picker/global state as described above in (1).
  end

  mod.a2 = function(prompt_bufnr)
    -- your code goes here
  end
  mod = transform_mod(mod)

  -- Now the following is possible. This means that actions a2 will be executed
  -- after action a1. You can chain as many actions as you want.
  local action = mod.a1 + mod.a2
  action(bufnr)
<

Another interesing thing to do is that these actions now have functions you can
call. These functions include `:replace(f)`, `:replace_if(f, c)`,
`replace_map(tbl)` and `enhance(tbl)`. More information on these functions can
be found in the `developers.md` and `lua/tests/automated/action_spec.lua` file.

actions.move_selection_next({prompt_bufnr}) *telescope.actions.move_selection_next()*
    Move the selection to the next entry


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.move_selection_previous({prompt_bufnr}) *telescope.actions.move_selection_previous()*
    Move the selection to the previous entry


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.move_selection_worse({prompt_bufnr}) *telescope.actions.move_selection_worse()*
    Move the selection to the entry that has a worse score


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.move_selection_better({prompt_bufnr}) *telescope.actions.move_selection_better()*
    Move the selection to the entry that has a better score


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.move_to_top({prompt_bufnr})          *telescope.actions.move_to_top()*
    Move to the top of the picker


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.move_to_middle({prompt_bufnr})    *telescope.actions.move_to_middle()*
    Move to the middle of the picker


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.move_to_bottom({prompt_bufnr})    *telescope.actions.move_to_bottom()*
    Move to the bottom of the picker


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.add_selection({prompt_bufnr})      *telescope.actions.add_selection()*
    Add current entry to multi select


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.remove_selection({prompt_bufnr}) *telescope.actions.remove_selection()*
    Remove current entry from multi select


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.toggle_selection({prompt_bufnr}) *telescope.actions.toggle_selection()*
    Toggle current entry status for multi select


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.select_all({prompt_bufnr})            *telescope.actions.select_all()*
    Multi select all entries.
    - Note: selected entries may include results not visible in the results
      popup.


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.drop_all({prompt_bufnr})                *telescope.actions.drop_all()*
    Drop all entries from the current multi selection.


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.toggle_all({prompt_bufnr})            *telescope.actions.toggle_all()*
    Toggle multi selection for all entries.
    - Note: toggled entries may include results not visible in the results
      popup.


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.preview_scrolling_up({prompt_bufnr}) *telescope.actions.preview_scrolling_up()*
    Scroll the preview window up


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.preview_scrolling_down({prompt_bufnr}) *telescope.actions.preview_scrolling_down()*
    Scroll the preview window down


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.results_scrolling_up({prompt_bufnr}) *telescope.actions.results_scrolling_up()*
    Scroll the results window up


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.results_scrolling_down({prompt_bufnr}) *telescope.actions.results_scrolling_down()*
    Scroll the results window down


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.center({prompt_bufnr})                    *telescope.actions.center()*
    Center the cursor in the window, can be used after selecting a file to edit
    You can just map `actions.select_default + actions.center`


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.select_default({prompt_bufnr})    *telescope.actions.select_default()*
    Perform default action on selection, usually something like
    `:edit <selection>`

    i.e. open the selection in the current buffer


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.select_horizontal({prompt_bufnr}) *telescope.actions.select_horizontal()*
    Perform 'horizontal' action on selection, usually something like
    `:new <selection>`

    i.e. open the selection in a new horizontal split


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.select_vertical({prompt_bufnr})  *telescope.actions.select_vertical()*
    Perform 'vertical' action on selection, usually something like
    `:vnew <selection>`

    i.e. open the selection in a new vertical split


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.select_tab({prompt_bufnr})            *telescope.actions.select_tab()*
    Perform 'tab' action on selection, usually something like
    `:tabedit <selection>`

    i.e. open the selection in a new tab


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.select_drop({prompt_bufnr})          *telescope.actions.select_drop()*
    Perform 'drop' action on selection, usually something like
    `:drop <selection>`

    i.e. open the selection in a window


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.select_tab_drop({prompt_bufnr})  *telescope.actions.select_tab_drop()*
    Perform 'tab drop' action on selection, usually something like
    `:tab drop <selection>`

    i.e. open the selection in a new tab


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.file_edit({prompt_bufnr})              *telescope.actions.file_edit()*
    Perform file edit on selection, usually something like
    `:edit <selection>`


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.file_split({prompt_bufnr})            *telescope.actions.file_split()*
    Perform file split on selection, usually something like
    `:new <selection>`


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.file_vsplit({prompt_bufnr})          *telescope.actions.file_vsplit()*
    Perform file vsplit on selection, usually something like
    `:vnew <selection>`


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.file_tab({prompt_bufnr})                *telescope.actions.file_tab()*
    Perform file tab on selection, usually something like
    `:tabedit <selection>`


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.close({prompt_bufnr})                      *telescope.actions.close()*
    Close the Telescope window, usually used within an action


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions._close({prompt_bufnr})                    *telescope.actions._close()*
    Close the Telescope window, usually used within an action
    Deprecated and no longer needed, does the same as
    |telescope.actions.close|. Might be removed in the future


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.edit_command_line({prompt_bufnr}) *telescope.actions.edit_command_line()*
    Set a value in the command line and dont run it, making it editable.


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.set_command_line({prompt_bufnr}) *telescope.actions.set_command_line()*
    Set a value in the command line and run it


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.edit_search_line({prompt_bufnr}) *telescope.actions.edit_search_line()*
    Set a value in the search line and dont search for it, making it editable.


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.set_search_line({prompt_bufnr})  *telescope.actions.set_search_line()*
    Set a value in the search line and search for it


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.edit_register({prompt_bufnr})      *telescope.actions.edit_register()*
    Edit a register


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.paste_register({prompt_bufnr})    *telescope.actions.paste_register()*
    Paste the selected register into the buffer

    Note: only meant to be used inside builtin.registers


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.insert_symbol({prompt_bufnr})      *telescope.actions.insert_symbol()*
    Insert a symbol into the current buffer (while switching to normal mode)


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.insert_symbol_i({prompt_bufnr})  *telescope.actions.insert_symbol_i()*
    Insert a symbol into the current buffer and keeping the insert mode.


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.git_create_branch({prompt_bufnr}) *telescope.actions.git_create_branch()*
    Create and checkout a new git branch if it doesn't already exist


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.git_apply_stash({prompt_bufnr})  *telescope.actions.git_apply_stash()*
    Applies an existing git stash


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.git_checkout({prompt_bufnr})        *telescope.actions.git_checkout()*
    Checkout an existing git branch


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.git_switch_branch({prompt_bufnr}) *telescope.actions.git_switch_branch()*
    Switch to git branch.
    If the branch already exists in local, switch to that. If the branch is
    only in remote, create new branch tracking remote and switch to new one.


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.git_track_branch({prompt_bufnr}) *telescope.actions.git_track_branch()*
    Tell git to track the currently selected remote branch in Telescope


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.git_delete_branch({prompt_bufnr}) *telescope.actions.git_delete_branch()*
    Delete the currently selected branch


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.git_merge_branch({prompt_bufnr}) *telescope.actions.git_merge_branch()*
    Merge the currently selected branch


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.git_rebase_branch({prompt_bufnr}) *telescope.actions.git_rebase_branch()*
    Rebase to selected git branch


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.git_reset_mixed({prompt_bufnr})  *telescope.actions.git_reset_mixed()*
    Reset to selected git commit using mixed mode


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.git_reset_soft({prompt_bufnr})    *telescope.actions.git_reset_soft()*
    Reset to selected git commit using soft mode


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.git_reset_hard({prompt_bufnr})    *telescope.actions.git_reset_hard()*
    Reset to selected git commit using hard mode


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.git_checkout_current_buffer({prompt_bufnr}) *telescope.actions.git_checkout_current_buffer()*
    Checkout a specific file for a given sha


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.git_staging_toggle({prompt_bufnr}) *telescope.actions.git_staging_toggle()*
    Stage/unstage selected file


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.send_selected_to_qflist({prompt_bufnr}) *telescope.actions.send_selected_to_qflist()*
    Sends the selected entries to the quickfix list, replacing the previous
    entries.


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.add_selected_to_qflist({prompt_bufnr}) *telescope.actions.add_selected_to_qflist()*
    Adds the selected entries to the quickfix list, keeping the previous
    entries.


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.send_to_qflist({prompt_bufnr})    *telescope.actions.send_to_qflist()*
    Sends all entries to the quickfix list, replacing the previous entries.


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.add_to_qflist({prompt_bufnr})      *telescope.actions.add_to_qflist()*
    Adds all entries to the quickfix list, keeping the previous entries.


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.send_selected_to_loclist({prompt_bufnr}) *telescope.actions.send_selected_to_loclist()*
    Sends the selected entries to the location list, replacing the previous
    entries.


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.add_selected_to_loclist({prompt_bufnr}) *telescope.actions.add_selected_to_loclist()*
    Adds the selected entries to the location list, keeping the previous
    entries.


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.send_to_loclist({prompt_bufnr})  *telescope.actions.send_to_loclist()*
    Sends all entries to the location list, replacing the previous entries.


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.add_to_loclist({prompt_bufnr})    *telescope.actions.add_to_loclist()*
    Adds all entries to the location list, keeping the previous entries.


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.smart_send_to_qflist({prompt_bufnr}) *telescope.actions.smart_send_to_qflist()*
    Sends the selected entries to the quickfix list, replacing the previous
    entries. If no entry was selected, sends all entries.


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.smart_add_to_qflist({prompt_bufnr}) *telescope.actions.smart_add_to_qflist()*
    Adds the selected entries to the quickfix list, keeping the previous
    entries. If no entry was selected, adds all entries.


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.smart_send_to_loclist({prompt_bufnr}) *telescope.actions.smart_send_to_loclist()*
    Sends the selected entries to the location list, replacing the previous
    entries. If no entry was selected, sends all entries.


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.smart_add_to_loclist({prompt_bufnr}) *telescope.actions.smart_add_to_loclist()*
    Adds the selected entries to the location list, keeping the previous
    entries. If no entry was selected, adds all entries.


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.complete_tag({prompt_bufnr})        *telescope.actions.complete_tag()*
    Open completion menu containing the tags which can be used to filter the
    results in a faster way


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.cycle_history_next({prompt_bufnr}) *telescope.actions.cycle_history_next()*
    Cycle to the next search prompt in the history


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.cycle_history_prev({prompt_bufnr}) *telescope.actions.cycle_history_prev()*
    Cycle to the previous search prompt in the history


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.open_qflist({prompt_bufnr})          *telescope.actions.open_qflist()*
    Open the quickfix list. It makes sense to use this in combination with one
    of the send_to_qflist actions `actions.smart_send_to_qflist +
    actions.open_qflist`


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.open_loclist({prompt_bufnr})        *telescope.actions.open_loclist()*
    Open the location list. It makes sense to use this in combination with one
    of the send_to_loclist actions `actions.smart_send_to_qflist +
    actions.open_qflist`


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.delete_buffer({prompt_bufnr})      *telescope.actions.delete_buffer()*
    Delete the selected buffer or all the buffers selected using multi
    selection.


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.cycle_previewers_next({prompt_bufnr}) *telescope.actions.cycle_previewers_next()*
    Cycle to the next previewer if there is one available.
    This action is not mapped on default.


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.cycle_previewers_prev({prompt_bufnr}) *telescope.actions.cycle_previewers_prev()*
    Cycle to the previous previewer if there is one available.
    This action is not mapped on default.


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.remove_selected_picker({prompt_bufnr}) *telescope.actions.remove_selected_picker()*
    Removes the selected picker in |builtin.pickers|.
    This action is not mapped by default and only intended for
    |builtin.pickers|.


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.which_key({prompt_bufnr})              *telescope.actions.which_key()*
    Display the keymaps of registered actions similar to which-key.nvim.

    - Notes:
      - The defaults can be overridden via |action_generate.which_key|.


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


actions.to_fuzzy_refine({prompt_bufnr})  *telescope.actions.to_fuzzy_refine()*
    Move from a none fuzzy search to a fuzzy one
    This action is meant to be used in live_grep and
    lsp_dynamic_workspace_symbols


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr



================================================================================
ACTIONS_STATE                                          *telescope.actions.state*

Functions to be used to determine the current state of telescope.

Generally used from within other |telescope.actions|

action_state.get_selected_entry() *telescope.actions.state.get_selected_entry()*
    Get the current entry



action_state.get_current_line()   *telescope.actions.state.get_current_line()*
    Gets the current line



action_state.get_current_picker({prompt_bufnr}) *telescope.actions.state.get_current_picker()*
    Gets the current picker


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr



================================================================================
ACTIONS_SET                                              *telescope.actions.set*

Telescope action sets are used to provide an interface for managing actions
that all primarily do the same thing, but with slight tweaks.

For example, when editing files you may want it in the current split, a
vertical split, etc. Instead of making users have to overwrite EACH of those
every time they want to change this behavior, they can instead replace the
`set` itself and then it will work great and they're done.

action_set.shift_selection({prompt_bufnr}, {change}) *telescope.actions.set.shift_selection()*
    Move the current selection of a picker {change} rows. Handles not
    overflowing / underflowing the list.


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr
        {change}       (number)  The amount to shift the selection by


action_set.select({prompt_bufnr}, {type})     *telescope.actions.set.select()*
    Select the current entry. This is the action set to overwrite common
    actions by the user.

    By default maps to editing a file.


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr
        {type}         (string)  The type of selection to make


action_set.edit({prompt_bufnr}, {command})      *telescope.actions.set.edit()*
    Edit a file based on the current selection.


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr
        {command}      (string)  The command to use to open the file.


action_set.scroll_previewer({prompt_bufnr}, {direction}) *telescope.actions.set.scroll_previewer()*
    Scrolls the previewer up or down. Defaults to a half page scroll, but can
    be overridden using the `scroll_speed` option in `layout_config`. See
    |telescope.layout| for more details.


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr
        {direction}    (number)  The direction of the scrolling


action_set.scroll_results({prompt_bufnr}, {direction}) *telescope.actions.set.scroll_results()*
    Scrolls the results up or down. Defaults to a half page scroll, but can be
    overridden using the `scroll_speed` option in `layout_config`. See
    |telescope.layout| for more details.


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr
        {direction}    (number)  The direction of the scrolling



================================================================================
ACTIONS_LAYOUT                                        *telescope.actions.layout*

The layout actions are actions to be used to change the layout of a picker.

action_layout.toggle_preview({prompt_bufnr}) *telescope.actions.layout.toggle_preview()*
    Toggle preview window.
    - Note: preview window can be toggled even if preview is set to false.

    This action is not mapped by default.


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


action_layout.toggle_prompt_position({prompt_bufnr}) *telescope.actions.layout.toggle_prompt_position()*
    Toggles the `prompt_position` option between "top" and "bottom". Checks if
    `prompt_position` is an option for the current layout.

    This action is not mapped by default.


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


action_layout.toggle_mirror({prompt_bufnr}) *telescope.actions.layout.toggle_mirror()*
    Toggles the `mirror` option between `true` and `false`. Checks if `mirror`
    is an option for the current layout.

    This action is not mapped by default.


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


action_layout.cycle_layout_next({prompt_bufnr}) *telescope.actions.layout.cycle_layout_next()*
    Cycles to the next layout in `cycle_layout_list`.

    This action is not mapped by default.


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr


action_layout.cycle_layout_prev({prompt_bufnr}) *telescope.actions.layout.cycle_layout_prev()*
    Cycles to the previous layout in `cycle_layout_list`.

    This action is not mapped by default.


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr



================================================================================
ACTIONS_UTILS                                          *telescope.actions.utils*

Utilities to wrap functions around picker selections and entries.

Generally used from within other |telescope.actions|

utils.map_entries({prompt_bufnr}, {f}) *telescope.actions.utils.map_entries()*
    Apply `f` to the entries of the current picker.
    - Notes:
      - Mapped entries include all currently filtered results, not just the
        visible onces.
      - Indices are 1-indexed, whereas rows are 0-indexed.
    - Warning: `map_entries` has no return value.
      - The below example showcases how to collect results

    Usage:
    >
      local action_state = require "telescope.actions.state"
      local action_utils = require "telescope.actions.utils"
      function entry_value_by_row()
        local prompt_bufnr = vim.api.nvim_get_current_buf()
        local current_picker = action_state.get_current_picker(prompt_bufnr)
        local results = {}
          action_utils.map_entries(prompt_bufnr, function(entry, index, row)
          results[row] = entry.value
        end)
        return results
      end
<


    Parameters: ~
        {prompt_bufnr} (number)    The prompt bufnr
        {f}            (function)  Function to map onto entries of picker that
                                   takes (entry, index, row) as viable
                                   arguments


utils.map_selections({prompt_bufnr}, {f}) *telescope.actions.utils.map_selections()*
    Apply `f` to the multi selections of the current picker and return a table
    of mapped selections.
    - Notes:
      - Mapped selections may include results not visible in the results popup.
      - Selected entries are returned in order of their selection.
    - Warning: `map_selections` has no return value.
      - The below example showcases how to collect results

    Usage:
    >
      local action_state = require "telescope.actions.state"
      local action_utils = require "telescope.actions.utils"
      function selection_by_index()
        local prompt_bufnr = vim.api.nvim_get_current_buf()
        local current_picker = action_state.get_current_picker(prompt_bufnr)
        local results = {}
          action_utils.map_selections(prompt_bufnr, function(entry, index)
          results[index] = entry.value
        end)
        return results
      end
<


    Parameters: ~
        {prompt_bufnr} (number)    The prompt bufnr
        {f}            (function)  Function to map onto selection of picker
                                   that takes (selection) as a viable argument


utils.get_registered_mappings({prompt_bufnr}) *telescope.actions.utils.get_registered_mappings()*
    Utility to collect mappings of prompt buffer in array of `{mode, keybind,
    name}`.


    Parameters: ~
        {prompt_bufnr} (number)  The prompt bufnr



================================================================================
ACTIONS_GENERATE                                    *telescope.actions.generate*

Module for convenience to override defaults of corresponding
|telescope.actions| at |telescope.setup()|.

General usage:
>
  require("telescope").setup {
    defaults = {
      mappings = {
        n = {
          ["?"] = action_generate.which_key {
            name_width = 20, -- typically leads to smaller floats
            max_height = 0.5, -- increase potential maximum height
            separator = " > ", -- change sep between mode, keybind, and name
            close_with_action = false, -- do not close float on action
          },
        },
      },
    },
  }
<

action_generate.which_key({opts})     *telescope.actions.generate.which_key()*
    Display the keymaps of registered actions similar to which-key.nvim.

    - Floating window:
      - Appears on the opposite side of the prompt.
      - Resolves to minimum required number of lines to show hints with `opts`
        or truncates entries at `max_height`.
      - Closes automatically on action call and can be disabled with by setting
        `close_with_action` to false.


    Parameters: ~
        {opts} (table)  options to pass to toggling registered actions

    Fields: ~
        {max_height}             (number)   % of max. height or no. of rows
                                            for hints (default: 0.4), see
                                            |resolver.resolve_height()|
        {only_show_current_mode} (boolean)  only show keymaps for the current
                                            mode (default: true)
        {mode_width}             (number)   fixed width of mode to be shown
                                            (default: 1)
        {keybind_width}          (number)   fixed width of keybind to be shown
                                            (default: 7)
        {name_width}             (number)   fixed width of action name to be
                                            shown (default: 30)
        {column_padding}         (string)   string to split; can be used for
                                            vertical separator (default: " ")
        {mode_hl}                (string)   hl group of mode (default:
                                            TelescopeResultsConstant)
        {keybind_hl}             (string)   hl group of keybind (default:
                                            TelescopeResultsVariable)
        {name_hl}                (string)   hl group of action name (default:
                                            TelescopeResultsFunction)
        {column_indent}          (number)   number of left-most spaces before
                                            keybinds are shown (default: 4)
        {line_padding}           (number)   row padding in top and bottom of
                                            float (default: 1)
        {separator}              (string)   separator string between mode, key
                                            bindings, and action (default: "
                                            -> ")
        {close_with_action}      (boolean)  registered action will close
                                            keymap float (default: true)
        {normal_hl}              (string)   winhl of "Normal" for keymap hints
                                            floating window (default:
                                            "TelescopePrompt")
        {border_hl}              (string)   winhl of "Normal" for keymap
                                            borders (default:
                                            "TelescopePromptBorder")
        {winblend}               (number)   pseudo-transparency of keymap
                                            hints floating window



================================================================================
PREVIEWERS                                                *telescope.previewers*

Provides a Previewer table that has to be implemented by each previewer. To
achieve this, this module also provides two wrappers that abstract most of the
work and make it really easy create new previewers.
  - `previewers.new_termopen_previewer`
  - `previewers.new_buffer_previewer`

Furthermore, there are a collection of previewers already defined which can be
used for every picker, as long as the entries of the picker provide the
necessary fields. The more important ones are
  - `previewers.cat`
  - `previewers.vimgrep`
  - `previewers.qflist`
  - `previewers.vim_buffer_cat`
  - `previewers.vim_buffer_vimgrep`
  - `previewers.vim_buffer_qflist`

Previewers can be disabled for any builtin or custom picker by doing :Telescope
find_files previewer=false

previewers.Previewer()                      *telescope.previewers.Previewer()*
    This is the base table all previewers have to implement. It's possible to
    write a wrapper for this because most previewers need to have the same keys
    set. Examples of wrappers are:
      - `new_buffer_previewer`
      - `new_termopen_previewer`

    To create a new table do following:
      - `local new_previewer = Previewer:new(opts)`

    What `:new` expects is listed below

    The interface provides following set of functions. All of them, besides
    `new`, will be handled by telescope pickers.
    - `:new(opts)`
    - `:preview(entry, status)`
    - `:teardown()`
    - `:send_input(input)`
    - `:scroll_fn(direction)`

    `Previewer:new()` expects a table as input with following keys:
      - `setup` function(self): Will be called the first time preview will be 
        called.
      - `teardown` function(self): Will be called on cleanup.
      - `preview_fn` function(self, entry, status): Will be called each time a
        new entry was selected.
      - `title` function(self): Will return the static title of the previewer.
      - `dynamic_title` function(self, entry): Will return the dynamic title of
        the previewer. Will only be called when config value
        dynamic_preview_title is true.
      - `send_input` function(self, input): This is meant for 
        `termopen_previewer` and it can be used to send input to the terminal 
        application, like less.
      - `scroll_fn` function(self, direction): Used to make scrolling work.



previewers.new()                                  *telescope.previewers.new()*
    A shorthand for creating a new Previewer. The provided table will be
    forwarded to `Previewer:new(...)`



previewers.new_termopen_previewer() *telescope.previewers.new_termopen_previewer()*
    Is a wrapper around Previewer and helps with creating a new
    `termopen_previewer`.

    It requires you to specify one table entry `get_command(entry, status)`.
    This `get_command` function has to return the terminal command that will be
    executed for each entry. Example:
    >
      get_command = function(entry, status)
        return { 'bat', entry.path }
      end
<

    Additionally you can define:
    - `title` a static title for example "File Preview"
    - `dyn_title(self, entry)` a dynamic title function which gets called when
      config value `dynamic_preview_title = true`

    It's an easy way to get your first previewer going and it integrates well
    with `bat` and `less`. Providing out of the box scrolling if the command
    uses less.

    Furthermore, it will forward all `config.set_env` environment variables to
    that terminal process.



previewers.cat()                                  *telescope.previewers.cat()*
    Provides a `termopen_previewer` which has the ability to display files. It
    will always show the top of the file and has support for `bat`(prioritized)
    and `cat`. Each entry has to provide either the field `path` or `filename`
    in order to make this previewer work.

    The preferred way of using this previewer is like this
    `require('telescope.config').values.cat_previewer` This will respect user
    configuration and will use `buffer_previewers` in case it's configured that
    way.



previewers.vimgrep()                          *telescope.previewers.vimgrep()*
    Provides a `termopen_previewer` which has the ability to display files at
    the provided line. It has support for `bat`(prioritized) and `cat`. Each
    entry has to provide either the field `path` or `filename` and a `lnum`
    field in order to make this previewer work.

    The preferred way of using this previewer is like this
    `require('telescope.config').values.grep_previewer` This will respect user
    configuration and will use `buffer_previewers` in case it's configured that
    way.



previewers.qflist()                            *telescope.previewers.qflist()*
    Provides a `termopen_previewer` which has the ability to display files at
    the provided line or range. It has support for `bat`(prioritized) and
    `cat`. Each entry has to provide either the field `path` or `filename`,
    `lnum` and a `start` and `finish` range in order to make this previewer
    work.

    The preferred way of using this previewer is like this
    `require('telescope.config').values.qflist_previewer` This will respect
    user configuration and will use buffer previewers in case it's configured
    that way.



previewers.new_buffer_previewer() *telescope.previewers.new_buffer_previewer()*
    An interface to instantiate a new `buffer_previewer`. That means that the
    content actually lives inside a vim buffer which enables us more control
    over the actual content. For example, we can use `vim.fn.search` to jump to
    a specific line or reuse buffers/already opened files more easily. This
    interface is more complex than `termopen_previewer` but offers more
    flexibility over your content. It was designed to display files but was
    extended to also display the output of terminal commands.

    In the following options, state table and general tips are mentioned to
    make your experience with this previewer more seamless.


    options:
      - `define_preview = function(self, entry, status)` (required) Is called
        for each selected entry, after each selection_move (up or down) and is
        meant to handle things like reading file, jump to line or attach a
        highlighter.
      - `setup = function(self)` (optional) Is called once at the beginning,
        before the preview for the first entry is displayed. You can return a
        table of vars that will be available in `self.state` in each
        `define_preview` call.
      - `teardown = function(self)` (optional) Will be called at the end, when
        the picker is being closed and is meant to cleanup everything that was
        allocated by the previewer. The `buffer_previewer` will automatically
        cleanup all created buffers. So you only need to handle things that
        were introduced by you.
      - `keep_last_buf = true` (optional) Will not delete the last selected
        buffer. This would allow you to reuse that buffer in the select action.
        For example, that buffer can be opened in a new split, rather than
        recreating that buffer in an action. To access the last buffer number: 
        `require('telescope.state').get_global_key("last_preview_bufnr")`
      - `get_buffer_by_name = function(self, entry)` Allows you to set a unique
        name for each buffer. This is used for caching purpose.
        `self.state.bufname` will be nil if the entry was never loaded or the
        unique name when it was loaded once. For example, useful if you have
        one file but multiple entries. This happens for grep and lsp builtins.
        So to make the cache work only load content if `self.state.bufname ~=
        entry.your_unique_key`
      - `title` a static title for example "File Preview"
      - `dyn_title(self, entry)` a dynamic title function which gets called 
        when config value `dynamic_preview_title = true`

    `self.state` table:
      - `self.state.bufnr` Is the current buffer number, in which you have to
        write the loaded content. Don't create a buffer yourself, otherwise
        it's not managed by the buffer_previewer interface and you will
        probably be better off writing your own interface.
      - self.state.winid Current window id. Useful if you want to set the
        cursor to a provided line number.
      - self.state.bufname Will return the current buffer name, if
        `get_buffer_by_name` is defined. nil will be returned if the entry was
        never loaded or when `get_buffer_by_name` is not set.

    Tips:
      - If you want to display content of a terminal job, use: 
        `require('telescope.previewers.utils').job_maker(cmd, bufnr, opts)`
          - `cmd` table: for example { 'git', 'diff', entry.value }
          - `bufnr` number: in which the content will be written
          - `opts` table: with following keys
            - `bufname` string: used for cache
            - `value` string: used for cache
            - `mode` string: either "insert" or "append". "insert" is default
            - `env` table: define environment variables. Example:
              - `{ ['PAGER'] = '', ['MANWIDTH'] = 50 }`
            - `cwd` string: define current working directory for job
            - `callback` function(bufnr, content): will be called when job is
              done. Content will be nil if job is already loaded. So you can do
              highlighting only the first time the previewer is created for
              that entry. Use the returned `bufnr` and not `self.state.bufnr`
              in callback, because state can already be changed at this point
              in time.
      - If you want to attach a highlighter use:
        - `require('telescope.previewers.utils').highlighter(bufnr, ft)`
          - This will prioritize tree sitter highlighting if available for 
            environment and language.
        - `require('telescope.previewers.utils').regex_highlighter(bufnr, ft)`
        - `require('telescope.previewers.utils').ts_highlighter(bufnr, ft)`
      - If you want to use `vim.fn.search` or similar you need to run it in 
        that specific buffer context. Do
    >
          vim.api.nvim_buf_call(bufnr, function()
            -- for example `search` and `matchadd`
          end)
        to achieve that.
<
      - If you want to read a file into the buffer it's best to use 
        `buffer_previewer_maker`. But access this function with 
        `require('telescope.config').values.buffer_previewer_maker` because it
        can be redefined by users.



previewers.buffer_previewer_maker({filepath}, {bufnr}, {opts}) *telescope.previewers.buffer_previewer_maker()*
    A universal way of reading a file into a buffer previewer. It handles async
    reading, cache, highlighting, displaying directories and provides a
    callback which can be used, to jump to a line in the buffer.


    Parameters: ~
        {filepath} (string)  String to the filepath, will be expanded
        {bufnr}    (number)  Where the content will be written
        {opts}     (table)   keys: `use_ft_detect`, `bufname` and `callback`


previewers.vim_buffer_cat()            *telescope.previewers.vim_buffer_cat()*
    A previewer that is used to display a file. It uses the `buffer_previewer`
    interface and won't jump to the line. To integrate this one into your own
    picker make sure that the field `path` or `filename` is set for each entry.
    The preferred way of using this previewer is like this
    `require('telescope.config').values.file_previewer` This will respect user
    configuration and will use `termopen_previewer` in case it's configured
    that way.



previewers.vim_buffer_vimgrep()    *telescope.previewers.vim_buffer_vimgrep()*
    A previewer that is used to display a file and jump to the provided line.
    It uses the `buffer_previewer` interface. To integrate this one into your
    own picker make sure that the field `path` or `filename` and `lnum` is set
    in each entry. If the latter is not present, it will default to the first
    line. The preferred way of using this previewer is like this
    `require('telescope.config').values.grep_previewer` This will respect user
    configuration and will use `termopen_previewer` in case it's configured
    that way.



previewers.vim_buffer_qflist()      *telescope.previewers.vim_buffer_qflist()*
    Is the same as `vim_buffer_vimgrep` and only exist for consistency with
    `term_previewers`.

    The preferred way of using this previewer is like this
    `require('telescope.config').values.qflist_previewer` This will respect
    user configuration and will use `termopen_previewer` in case it's
    configured that way.



previewers.git_branch_log()            *telescope.previewers.git_branch_log()*
    A previewer that shows a log of a branch as graph



previewers.git_stash_diff()            *telescope.previewers.git_stash_diff()*
    A previewer that shows a diff of a stash



previewers.git_commit_diff_to_parent() *telescope.previewers.git_commit_diff_to_parent()*
    A previewer that shows a diff of a commit to a parent commit.
    The run command is `git --no-pager diff SHA^! -- $CURRENT_FILE`

    The current file part is optional. So is only uses it with bcommits.



previewers.git_commit_diff_to_head() *telescope.previewers.git_commit_diff_to_head()*
    A previewer that shows a diff of a commit to head.
    The run command is `git --no-pager diff --cached $SHA -- $CURRENT_FILE`

    The current file part is optional. So is only uses it with bcommits.



previewers.git_commit_diff_as_was() *telescope.previewers.git_commit_diff_as_was()*
    A previewer that shows a diff of a commit as it was.
    The run command is `git --no-pager show $SHA:$CURRENT_FILE` or `git
    --no-pager show $SHA`



previewers.git_commit_message()    *telescope.previewers.git_commit_message()*
    A previewer that shows the commit message of a diff.
    The run command is `git --no-pager log -n 1 $SHA`



previewers.git_file_diff()              *telescope.previewers.git_file_diff()*
    A previewer that shows the current diff of a file. Used in git_status.
    The run command is `git --no-pager diff $FILE`



previewers.display_content()          *telescope.previewers.display_content()*
    A deprecated way of displaying content more easily. Was written at a time,
    where the buffer_previewer interface wasn't present. Nowadays it's easier
    to just use this. We will keep it around for backwards compatibility
    because some extensions use it. It doesn't use cache or some other clever
    tricks.




================================================================================
HISTORY                                              *telescope.actions.history*

A base implementation of a prompt history that provides a simple history and
can be replaced with a custom implementation.

For example: We provide a extension for a smart history that uses sql.nvim to
map histories to metadata, like the calling picker or cwd.

So you have a history for:
- find_files project_1
- grep_string project_1
- live_grep project_1
- find_files project_2
- grep_string project_2
- live_grep project_2
- etc

See https://github.com/nvim-telescope/telescope-smart-history.nvim

histories.History()                      *telescope.actions.history.History()*
    Manages prompt history


    Fields: ~
        {enabled} (boolean)  Will indicate if History is enabled or disabled
        {path}    (string)   Will point to the location of the history file
        {limit}   (string)   Will have the limit of the history. Can be nil,
                             if limit is disabled.
        {content} (table)    History table. Needs to be filled by your own
                             History implementation
        {index}   (number)   Used to keep track of the next or previous index.
                             Default is #content + 1


histories.History:new({opts})        *telescope.actions.history.History:new()*
    Create a new History


    Parameters: ~
        {opts} (table)  Defines the behavior of History

    Fields: ~
        {init}    (function)  Will be called after handling configuration
                              (required)
        {append}  (function)  How to append a new prompt item (required)
        {reset}   (function)  What happens on reset. Will be called when
                              telescope closes (required)
        {pre_get} (function)  Will be called before a next or previous item
                              will be returned (optional)


histories.new()                              *telescope.actions.history.new()*
    Shorthand to create a new history



histories.History:reset()          *telescope.actions.history.History:reset()*
    Will reset the history index to the default initial state. Will happen
    after the picker closed



histories.History:append({line}, {picker}, {no_reset}) *telescope.actions.history.History:append()*
    Append a new line to the history


    Parameters: ~
        {line}     (string)   current line that will be appended
        {picker}   (table)    the current picker object
        {no_reset} (boolean)  On default it will reset the state at the end.
                              If you don't want to do this set to true


histories.History:get_next({line}, {picker}) *telescope.actions.history.History:get_next()*
    Will return the next history item. Can be nil if there are no next items


    Parameters: ~
        {line}   (string)  the current line
        {picker} (table)   the current picker object

    Return: ~
        string: the next history item


histories.History:get_prev({line}, {picker}) *telescope.actions.history.History:get_prev()*
    Will return the previous history item. Can be nil if there are no previous
    items


    Parameters: ~
        {line}   (string)  the current line
        {picker} (table)   the current picker object

    Return: ~
        string: the previous history item


histories.get_simple_history() *telescope.actions.history.get_simple_history()*
    A simple implementation of history.

    It will keep one unified history across all pickers.




 vim:tw=78:ts=8:ft=help:norl: