SpaceVim/bundle/neomake/doc/neomake.txt

*neomake.txt* - asynchronous make for Vim version 7.4+ and Neovim

        ███╗   ██╗███████╗ ██████╗ ███╗   ███╗ █████╗ ██╗  ██╗███████╗
        ████╗  ██║██╔════╝██╔═══██╗████╗ ████║██╔══██╗██║ ██╔╝██╔════╝
        ██╔██╗ ██║█████╗  ██║   ██║██╔████╔██║███████║█████╔╝ █████╗
        ██║╚██╗██║██╔══╝  ██║   ██║██║╚██╔╝██║██╔══██║██╔═██╗ ██╔══╝
        ██║ ╚████║███████╗╚██████╔╝██║ ╚═╝ ██║██║  ██║██║  ██╗███████╗
        ╚═╝  ╚═══╝╚══════╝ ╚═════╝ ╚═╝     ╚═╝╚═╝  ╚═╝╚═╝  ╚═╝╚══════╝

       Run make tasks (such as linters and build tools) asynchronously.

==============================================================================
CONTENTS                                                             *neomake*

    1. Introduction ............................... |neomake-introduction|
    2. Commands ....................................... |neomake-commands|
    3. Configuration ............................. |neomake-configuration|
    3.1. Automake ..................................... |neomake-automake|
    4. Functions ..................................... |neomake-functions|
    5. Autocommands/Hooks ............................. |neomake-autocmds|
    6. Frequently Asked Questions (FAQ) .................... |neomake-faq|

==============================================================================
1. Introduction                                         *neomake-introduction*

Neomake leverages Neovim's or Vim's |job-control| feature where available to
run programs like syntax checkers asynchronously. Where job control is not
available, it resorts to a synchronous |system()| call, making it possible to
run this plugin in both older Vims and Neovim.
This plugin is heavily inspired by Vim plugins such as Syntastic and
dispatch.

==============================================================================
2. Commands                                                 *neomake-commands*

                                                                    *:Neomake*
                                                                *:NeomakeFile*
:Neomake [makers]       Run a make command with the current file as input. If
                        no makers are specified, the default makers for the
                        current |filetype| are used. See
                        |neomake-configuration| for more on makers.

                                                                   *:Neomake!*
                                                             *:NeomakeProject*
:Neomake! [makers]      Run a make command with no file as input. If no makers
                        are specified, the default top-level makers will be
                        used. If no default top-level makers exist,
                        'makeprg' will be used.

                                                                  *:NeomakeSh*
:NeomakeSh {command}    Run {command} in a shell (according to 'shell'). The
                        command output will be loaded into the quickfix list
                        when the job is complete. Example: >
                        :NeomakeSh find . -name '*.pyc'
<
                                                                 *:NeomakeSh!*
:NeomakeSh! {command}   Same as |:NeomakeSh|, but does not buffer the output.
                        Example: >
                        :NeomakeSh! while true; do date; sleep 1; done
<
                                                                *:NeomakeInfo*
:NeomakeInfo            Display information, meant for debugging and inclusion
                        in bug reports / help requests.

                                                            *:NeomakeListJobs*
:NeomakeListJobs        List all running jobs in the format: >
                        job_id job_name
<
                                                           *:NeomakeCancelJob*
:NeomakeCancelJob {job_id}
                        Terminate a job identified by its job_id.

                                                          *:NeomakeCancelJobs*
:NeomakeCancelJobs
                        Terminate all jobs.

                                                               *:NeomakeClean*
                                                              *:NeomakeClean!*
:NeomakeClean[!]
                        Clean signs, highlights etc. for file-mode, or
                        project-mode (with bang).

==============================================================================
2.1. Toggle commands                                          *neomake-toggle*

The following commands enable, disable or toggle Neomake globally, per tab or
per buffer by changing the `disabled` setting, which gets checked when Neomake
gets called via autocommands, e.g. with |neomake-automake| or custom
autocommands. You can still call e.g. |:Neomake| manually, and it will run.
In verbose mode (e.g. when called with |:verbose| (`:verb Neomake`)) the new
status gets displayed.

*:NeomakeToggle*        toggles Neomake globally.
*:NeomakeToggleBuffer*  toggles Neomake for the current buffer.
*:NeomakeToggleTab*     toggles Neomake for the current tab.
                                                             *neomake-disable*
*:NeomakeDisable*       disables Neomake globally.
*:NeomakeDisableBuffer* disables Neomake for the current buffer.
*:NeomakeDisableTab*    disables Neomake for the current tab.
                                                              *neomake-enable*
*:NeomakeEnable*        enables Neomake globally.
*:NeomakeEnableBuffer*  enables Neomake for the current buffer.
*:NeomakeEnableTab*     enables Neomake for the current tab.

*:NeomakeStatus*        displays the current status.

==============================================================================
3. Configuration                                       *neomake-configuration*

If you just want an easy way to run |:make| asynchronously, you're all set.
Just set your 'makeprg' and 'errorformat' as usual, and run |:Neomake!|.
If you want more, read on.

3.1 Automaking                                              *neomake-automake*

To configure Neomake to automatically run on certain events you can use
`neomake#configure#automake()`.

The first argument can either be a dictionary (mapping autocommand event
names to config dicts for fine grained control), or a string (as a shortcut to
configure certain modes). The 2nd argument is the default delay to use.

String usage (simple setup):~

  n: normal mode~
  This uses the |TextChanged| (falling back to |CursorHold|) and |InsertLeave|
  events.

  i: insert mode~
  This uses the |TextChangedI| event (falling back to |CursorHoldI|).

  r: "read" mode - when a buffer gets read/open~
  This will hook into the |BufWinEnter|, |FileType| and |FileChangedShellPost|
  events.

  w: "write" mode - when a buffer gets written~
  This uses the |BufWritePost| event, with an explicit timeout of 0.

Examples: >

  " When writing a buffer.
  call neomake#configure#automake('w')
  " When writing a buffer, and on normal mode changes (after 750ms).
  call neomake#configure#automake('nw', 750)
  " When reading a buffer (after 1s), and when writing.
  call neomake#configure#automake('rw', 1000)

Dictionary usage (advanced setup):~
>
  call neomake#configure#automake({
  \ 'TextChanged': {},
  \ 'InsertLeave': {},
  \ 'BufWritePost': {'delay': 0},
  \ 'BufWinEnter': {},
  \ }, 500)
<
This will trigger Neomake on |TextChanged|, |InsertLeave|, |BufWritePost| and
|BufWinEnter|, with a delay of 500ms by default, but 0 for |BufWritePost|.

You could do some advanced setup, based on if your laptop is running on
battery: >
  function! MyOnBattery()
    return readfile('/sys/class/power_supply/AC/online') == ['0']
  endfunction
  if MyOnBattery()
    call neomake#configure#automake('w')
  else
    call neomake#configure#automake('nrw', 1000)
  endif
<
                                              *neomake-automake-dynamic-delay*
The automake delay gets adjusted dynamically when timers or make runs get
aborted.  This is meant to support the use case where you are doing multiple
changes in succession (e.g. |undo|).
This can be controlled with the experimental `automake.cancelation_delay`
setting, which has to be a list: >
  call neomake#configure('automake.cancelation_delay', [0.2, 0.5, 3000])
>
The first value gets multiplied with the number of restarted timers (before a
make was triggered).
The second value gets multiplied with canceled/restarted make runs.
The sum of those values plus 1 gets multiplied with the original/configured
delay.  The third value is used as a maximum.
With the default settings from above this means that given a default delay of
500ms, 7 restarted timer, and 1 restarted make run, it would use a delay of
`(7*0.2 + 1*0.5 + 1) * 500 = 1450`.
The counts for restarted timers and make runs gets reset once a make run
finishes.

Makers                                                        *neomake-makers*
A maker is an object that tells Neomake how to run a job for you.

                                             *neomake-makers-get_list_entries*
If a maker has a `get_list_entries` function, this gets used to retrieve
entries for the location or quickfix list directly.
The function gets passed a jobinfo (|neomake-object-jobinfo|) object, and
should return a list of entries that will be used to fill the
location/quickfix list: >
    let maker = {'name': 'My maker'}
    function! maker.get_list_entries(jobinfo) abort
      return [
        \ {'text': 'Some error', 'lnum': 1, 'bufnr': a:jobinfo.bufnr},
        \ {'text': 'Some warning', 'type': 'W', 'lnum': 2, 'col': 1,
        \  'length': 5, 'filename': '/path/to/file'},
        \ ]
    endfunction
<
The required keys for entries are `text` and `lnum`, and you should set one of
`bufnr` or `filename` (otherwise the entry will not be valid).
The `length` entry in the example is internal to Neomake, and sets the length
for an highlight (see |neomake-highlight|).

                                                          *neomake-job-makers*
Otherwise a maker gets run as a job with a file as input ("file mode", good
for linting), or with no file as input ("project mode", good for building and
project-level tasks).

Here is a sample maker definition: >
    let g:neomake_make_maker = {
        \ 'exe': 'make',
        \ 'args': ['--build'],
        \ 'errorformat': '%f:%l:%c: %m',
        \ }
    " Use the maker like this:
    :Neomake! make
<
                                                   *neomake-makers-InitForJob*
You can configure a maker dynamically through a `InitForJob` function, which
gets the jobinfo (|neomake-object-jobinfo|) as its argument.
`self` refers to the maker instance therein, which is not copied (i.e.
mutating `self.args` would change it for following jobs also).
It is possible to return a new instance based on that (factory pattern): >

    function! MyCustomExe(jobinfo) abort
      let maker = deepcopy(self)
      call insert(maker.args, maker.exe)
      let maker.exe = 'some_custom_wrapper'
      return maker
    endfunction
    call neomake#config#set('ft.python.InitForJob', function('MyCustomExe'))
<
                                                          *neomake-makers-exe*
                                                         *neomake-makers-args*
`exe` has to be a string, while `args` can be a list or a string.
If `args` is a list, entries like '%' and '%:p' will be |expand()|ed, and
quoting/escaping is applied automatically.  If you want to handle escaping
yourself, `args` should be a string.

In the above example, the exe argument isn't strictly necessary, since Neomake
uses the name of the maker as the default value for it.  If you want it to be
usable on an individual file, you should also include the filetype in the
name: >
    let g:neomake_c_lint_maker = {
        \ 'exe': 'lint',
        \ 'args': ['--option', 'x'],
        \ 'errorformat': '%f:%l:%c: %m',
        \ }

    " Run this maker for the open file (runs "lint --option x myfile.c"):
    :Neomake lint

    " Or run it on the whole project, executing the command from Vim's current
    " working directory (runs "lint --option x"):
    :Neomake! c_lint
<
                                                           *neomake-args-file*
When running a maker on a file with |:Neomake|, you may want to control where
in the `args` list the file's path will appear. To do this, insert '%t' in
the `args` list and use `append_file=0`:  >
    let g:neomake_c_lint_maker = {
        \ 'exe': 'lint',
        \ 'args': ['%t', '--option', 'x'],
        \ 'append_file': 0,
        \ 'errorformat': '%f:%l:%c: %m',
        \ }
<
This will cause "lint /path/to/file.c --option x" to be run instead of
"lint --option x /path/to/file.c".

`%t` gets replaced with the absolute path to the file (handling any temporary
file).

                                                   *neomake-makers-processing*
A job maker's output gets processed in two ways:
1. through a maker's `process_output` function, or
2. via its `errorformat` (together with `mapexpr` and `postprocess`).

                                               *neomake-makers-process_output*
If a maker has a `process_output` function, this gets used to retrieve
entries for the location or quickfix list for the job's output directly.

The function gets called with a `context` dictionary, with the following
entries:
 - `output`: a list of lines
 - `source`: the source of the output (`stderr`, `stdout`)
 - `jobinfo`: the jobinfo object, see |neomake-object-jobinfo|
It should return a list of entries (dictionaries), where `text` and `lnum`
are required.  `bufnr` defaults to the jobs's buffer.

Using this method skips the processing based on `errorformat` (including
`mapexpr` and `postprocess`).

See |neomake-makers-process_json| below for handling JSON output.

                                                 *neomake-makers-process_json*
A maker's `process_json` function gets a |dict| with parsed JSON directly,
handling the JSON parsing and any errors before.

The function gets called with a `context` dictionary, containing the following
entries:
 - `json`: a dictionary with the parsed JSON
 - `source`: the source of the output (`stderr`, `stdout`)
 - `jobinfo`: the jobinfo object, see |neomake-object-jobinfo|
It should return a list of entries (dictionaries), where `text` and `lnum`
are required.  `bufnr` defaults to the jobs's buffer.

Using this method skips the processing based on `errorformat` (including
`mapexpr` and `postprocess`).

                                                *neomake-makers-filter_output*
A maker's `filter_output` function can filter any output before it gets
processed further.

The function gets called with two arguments: the list of lines (to be modified
in place) and a context dictionary with the following entries:
 - `source`: the source of the output (`stderr`, `stdout`)
 - `jobinfo`: the jobinfo object, see |neomake-object-jobinfo|

                                                      *neomake-makers-mapexpr*
You can define two optional properties on a maker object to process its
output: `mapexpr` is applied to the maker's output before any processing, and
`postprocess` is applied to each of the quickfix or location list entries.

The `mapexpr` property gets passed directly into |map()| as the `expr`
argument: >
    call map(lines, maker.mapexpr)
<where `lines` contains the maker output.

The following variables are available in the `mapexpr`:

 - `neomake_output_source`: either "stderr" or "stdout", depending on
   where the output is coming from. This will be "stdout" always for
   non-async Vim.
 - `neomake_bufname` and `neomake_bufdir`: the buffer's absolute path
   (|bufname()|) and directory, respectively.

The `mapexpr` itself gets evaluated in the context of the affected buffer in
file mode, and in the context of the buffer that is current when the maker
finished otherwise.

The following `mapexpr` could be used to prefix the output type: >
    "printf('[%s] %s', neomake_output_source, v:val)"
<
                                                  *neomake-makers-postprocess*
The `postprocess` property is a function (or list of functions) that get(s)
called for each entry in the location or quickfix list.
It allows to change entries there or remove them by setting the `valid` entry
to `-1`.

Example: make all entries a warning where `nr` is in the range of 100-199: >
    function PostprocessLintMaker(entry)
      if a:entry.nr >= 100 && a:entry.nr < 200
        let a:entry.type = 'W'
      endif
    endfunction
    let g:neomake_ft_lint_maker = {
        \ 'exe': 'lint',
        \ 'args': ['--option', 'x'],
        \ 'errorformat': '%f:%l:%c:%n: %m',
        \ 'postprocess': function('PostprocessLintMaker')
        \ }
<
Example: remove some entry for a specific maker (using |expr-lambda|): >
    let g:neomake_asciidoc_asciidoc_postprocess = {
        \ entry -> entry.text =~# 'illegal system attribute name: font-style'
        \ ? extend(entry, {'valid': -1})
        \ : entry}
<

Builtin postprocessors are `neomake#postprocess#compress_whitespace`, which
fixes whitespace issues (which is useful with multiline error messages),
and `neomake#postprocess#generic_length`, which adds a length property (used
for highlights |neomake-highlight|) for entries, when the message refers to an
identifier at the entry's column.
See `neomake#makers#ft#text#PostprocessWritegood` for an example.

Entries can be selectively removed in post-processing by setting its "valid"
property to `-1`.  This removal will happen even if `remove_invalid_entries`
is disabled.  This feature is meant for conditional removals and a simpler way
for end users to filter list entries.  Makers should handle removals through
|errorformat| using '%-G' to remove items that should never appear in the
error list.

                                                *neomake-makers-buffer_output*
Default: 1
By default Neomake will only process the output from makers when either the
output type changes (from stderr to stdout or vice versa), or at the end of
the job.

If you have a maker that is expected to run longer, and you want to get
feedback as early as possible, you can set this to `0`.

You can override this for a maker using e.g.: >
    let g:neomake_ft_test_maker_buffer_output = 0
<
Your results will appear earlier, but if the 'errorformat' is meant to parse
multiline output this will likely cause issues (depending on how the maker
flushes its output).

To change the default for all makers use: >
    call neomake#config#set('maker_defaults.buffer_output', 0)
<
                                       *neomake-makers-remove_invalid_entries*
Default: 0
This option filters invalid entries from makers from the location/quickfix
list (i.e. entries that do not match the 'errorformat', and that would show
up with a `||` prefix in the location/quickfix list): >
    let g:neomake_ft_maker_remove_invalid_entries = 1
<
NOTE: the default for this is 0, because unhandled/unexpected output might be
useful, e.g. when the program displays some error.
Makers should handle this properly through |errorformat|, e.g. by using '%-G'
(see |efm-ignore| and |neomake-faq-errorformat|).

To change the default for all makers use: >
    call neomake#config#set('maker_defaults.remove_invalid_entries, 1)
<
                                                          *neomake-makers-cwd*
The working directory of a maker defaults to the current working directory
of the make run (|getcwd()|).
The `cwd` property overrides this, and gets expanded in the context of the
current buffer. Special buffers (like fugitive blobs) get handled for values
starting with `%:` (typically used in this context), falling back to
|expand()|. See |filename-modifiers|.
   >
Example: change to the buffer's directory: >
        let g:neomake_my_example_maker = {
        \ 'exe': 'pwd',
        \ 'cwd': '%:p:h'
        \ }
<
                                             *neomake-makers-tempfile_enabled*
Default: 1
This will pass a temporary file with the buffer's contents to the maker, in
case the buffer is not readable, modified, or has no filename.
A maker can specify the temporary file's name through the `tempfile_name`
property, and you can set it through the |neomake-makers-InitForJob| callback
(for advanced usage).
Otherwise it gets generated based on the original filename/filetype, and
falls back to using |tempname()|.

You can configure this per buffer or maker as usual, e.g.: >
        let g:neomake_<ft>_<name>_tempfile_enabled = 0
<
                                                 *neomake-makers-tempfile_dir*
Default: unset
You can configure the directory to use for temporary files (see
|neomake-makers-tempfile_enabled|).

The default behavior is to use the same directory as the original file, so
that any config files (e.g. `setup.cfg` for Python tools) take effect.

You can configure this per buffer or maker as usual, e.g.: >
        let g:neomake_<ft>_<name>_tempfile_dir = '/tmp/custom'
<
The value gets expanded (via `neomake#utils#ExpandArgs`), which allows for
the following to use the original file's directory structure (`%:p:h`): >
        let g:neomake_tempfile_dir = '/tmp/custom%:p:h'
<
                                                *neomake-makers-output_stream*
Default: "both" ("stdout", "stderr", "both")
The `output_stream` setting specifies what stream gets used for output from
the maker.
Any output on a stream not configured here gets reported as unexpected output.

                                               *neomake-makers-supports_stdin*
Default: 0
With `supports_stdin = 1` a maker indicates that it can use stdin instead of a
temporary file.  By default "-" is then used for the filename.

`supports_stdin` can be a dict function on the maker, which will get the
current jobinfo as its argument, and should return 1 or 0.
This function can change `self.args`, which is useful to append options like
e.g. "['--stdin-display-name', '%:p']".
You can also change `self.tempfile_name` therein.
It can be useful to change the current working directory for the maker here,
e.g. when it does not use its `--stdin-display-name` (or similar) option
to look for its config.  Use the jobinfo's `cd` method for this: >
    function! maker.supports_stdin(jobinfo) abort
        let self.args += ['--stdin-display-name', '%:.']
        call a:jobinfo.cd('%:h')
        return 1
    endfunction
<
                                                   *neomake-makers-uses_stdin*
Default: 0
`uses_stdin = 1` can be used to always use stdin for file arguments,
regardless of if a temporary file / stdin is required to be used.
It uses "-" as the default for "tempfile_name".

Global Options                                               *neomake-options*

*g:neomake_<name>_maker*
*g:neomake_<ft>_<name>_maker*
Define a new filetype or project-level maker. See |neomake-makers|.

                                                   *neomake-makers-properties*
*g:neomake_<name>_<property>*
*g:neomake_<ft>_<name>_<property>*
*b:neomake_<name>_<property>*
*b:neomake_<ft>_<name>_<property>*
Configure properties for a maker where <property> is one of `exe`, `args`,
`errorformat`, `buffer_output`, `remove_invalid_entries`, `append_file`,
or `supports_stdin`.

This can also be set per buffer, e.g.: >
    let g:neomake_javascript_jshint_exe = './myjshint'
    let b:neomake_javascript_jshint_exe = './myotherjshint'
<

The global defaults can be configured using `g:neomake_<property>`, i.e.
*g:neomake_remove_invalid_entries* to remove invalid entries from the quickfix
/ location list (|neomake-makers-remove_invalid_entries|), unless explicitly
provided by the maker or overridden by your global/buffer setting.

The internal defaults are: >
    let defaults = {
        \ 'exe': maker.name,
        \ 'args': [],
        \ 'errorformat': &errorformat,
        \ 'buffer_output': 0,
        \ 'remove_invalid_entries': 0
        \ }
<

*g:neomake_<ft>_enabled_makers*
*b:neomake_<ft>_enabled_makers*
This setting will tell Neomake which makers to use by default for the given
filetype `<ft>` (when called without a maker as an argument, i.e. |:Neomake|).

The default for this setting is the return value of the function
`neomake#makers#ft#<ft>#EnabledMakers`.  For Python this is defined in
`./autoload/neomake/makers/ft/python.vim`, and might return: >
    ['python', 'frosted', 'pylama']
<
This setting can also be defined per buffer, so the following snippet can be
used to configure a custom set of makers from your vimrc: >
    let g:neomake_python_enabled_makers = ['pep8', 'pylint']
    augroup my_custom_maker
        au!
        au Filetype custom.py let b:neomake_python_enabled_makers = ['flake8']
    augroup END
<
Please refer to |autocmd-patterns| for help on defining the pattern
(`custom.py`) in this case.

*g:neomake_enabled_makers*
*b:neomake_enabled_makers*
This setting will tell Neomake which makers to use by default when not
operating on a single file, or when no makers are defined for the filetype of
the current buffer. This effectively defaults to: >
    let g:neomake_enabled_makers = ['makeprg']
<
*g:neomake_open_list*
*b:neomake_open_list*
This setting will open the |location-list| or |quickfix| list (depending on
whether it is operating on a file) when adding entries. A value of 2 will
preserve the cursor position when the |location-list| or |quickfix| window is
opened. Defaults to 0.

*g:neomake_list_height*
*b:neomake_list_height*
The maximum height of the |location-list| or |quickfix| list window opened by
Neomake.  If there are fewer entries it will use that instead.
Defaults to 10.

*g:neomake_echo_current_error*
This setting will |:echo| the error for the line your cursor is on, if any.
It uses a timer (if |timers| are available), and |CursorHold|/|CursorHoldI|
otherwise.
Defaults to 1.

*g:neomake_virtualtext_current_error*
Use Neovim's virtualtext API to display the error for the current line next
to the text.  This is experimental, and uses the same mechanism (timer)
as |g:neomake_echo_current_error|.
Defaults to 1 (only available on Neovim 0.3.2+).

*g:neomake_virtualtext_prefix*
The prefix used with |g:neomake_virtualtext_current_error|.
Defaults to "❯ ".

*g:neomake_cursormoved_delay*
Delay (in ms) for the timer used to echo the current error with
|g:neomake_echo_current_error|.
Defaults to 100.

*g:neomake_serialize*
Setting this to 1 tells Neomake to run each enabled maker one after the other.
This is a good way to ensure messages don't get mixed up. This setting is
implied with non-async Vim versions.

*g:neomake_serialize_abort_on_error*
Setting this to 1 tells Neomake to abort after the first error status is
encountered. This setting only works when |g:neomake_serialize| is on.

*g:neomake_verbose*
Controls how verbose Neomake should be. Neomake log levels are as follows:
    0 - Errors only
    1 - Quiet message
    2 - Loud message (may log multiple messages at once, making the screen
        shift momentarily)
    3 - Debug information (all messages).
        This will also add time information to messages.
Each log level includes all the levels before it.

Defaults to 1.

'verbose' gets added to this setting, so you can use |:verbose| to increase
the verbosity temporarily: >
    :3verb Neomake
<
*g:neomake_logfile*
Setting this to a file path will write all messages (regardless of the level
configured through |g:neomake_verbose|) into it.
This is useful for debugging/hacking, and when reporting issues.
It requires Vim 7.4.503+ (or Neovim) to work properly, otherwise it will not
append, but overwrite the file with each message.

                                                               *neomake-signs*
*g:neomake_place_signs*
This setting enables the placement of signs next to items from the location
and quickfix list (i.e. errors/warnings etc recognized from the
'errorformat'). Defaults to 1.

*g:neomake_error_sign*
*g:neomake_warning_sign*
*g:neomake_info_sign*
*g:neomake_message_sign*
These options allow you to control the appearance of the signs that are
placed into the |signs| column next to lines with messages.
These are dictionaries that represent the parameters provided by
|:sign-define|. Here is an example definition: >
    let g:neomake_error_sign = {
        \ 'text': 'E>',
        \ 'texthl': 'ErrorMsg',
        \ }
<
See the |:highlight| command to list the highlight groups available to you or
create new ones.

Neomake uses the following defaults: >

     let g:neomake_error_sign = {
         \ 'text': '✖',
         \ 'texthl': 'NeomakeErrorSign',
         \ }
     let g:neomake_warning_sign = {
         \   'text': '‼',
         \   'texthl': 'NeomakeWarningSign',
         \ }
     let g:neomake_message_sign = {
          \   'text': '➤',
          \   'texthl': 'NeomakeMessageSign',
          \ }
     let g:neomake_info_sign = {
          \ 'text': 'ℹ',
          \ 'texthl': 'NeomakeInfoSign'
          \ }
<

Default |highlight-groups| are created with those names, but only if they do
not exist already, which allows you to customize them.  This should typically
be done through the |ColorScheme| autoevent, which applies it after any color
scheme: >

    augroup my_neomake_signs
        au!
        autocmd ColorScheme *
            \ hi NeomakeErrorSign ctermfg=white |
            \ hi NeomakeWarningSign ctermfg=yellow
    augroup END
<
You can use `neomake#utils#GetHighlight` to get e.g. the "bg" from
"SignColumn".  See `neomake#signs#DefineHighlights` where this is used.

                                                           *neomake-highlight*
*g:neomake_highlight_columns*
This setting enables highlighting of columns for items from the location and
quickfix list. Defaults to 1.

*g:neomake_highlight_lines*
This setting enables highlighting of lines for items from the location and
quickfix list. Defaults to 0.

If both |g:neomake_highlight_columns| and |g:neomake_highlight_lines| are
enabled, items with column information are highlighted using the column.

The following highlighting groups are used:
 - NeomakeError: links to "SpellBad" (|hl-SpellBad|)
 - NeomakeWarning: links to "SpellCap" (|hl-SpellCap|)
 - NeomakeInfo: links to "NeomakeWarning"
 - NeomakeMessage: links to "NeomakeWarning"

You can define them yourself: >

    augroup my_neomake_highlights
        au!
        autocmd ColorScheme *
          \ highlight NeomakeError … |
          \ highlight NeomakeWarning …
          guisp=White
    augroup END
>

*g:airline#extensions#neomake#enabled*
Shows warning and error counts returned by |neomake#statusline#LoclistCounts|
in the warning and error sections of the vim-airline 'statusline'. Defaults
to 1.

==============================================================================
4. Functions                                               *neomake-functions*

This list is non-exhaustive at the moment, but you may find some of these
functions useful.

*neomake#Make* (options)
This is the main entrypoint to Neomake, used by the |:Neomake| (and
|:Neomake!|) command.

`options` is a dictionary, and might include:
- `file_mode`: 1 if the makers should get run against a single file (typically
  used for linting). Default: 1.
- `enabled_makers`: the makers to use (list). Default: uses configuration.

Returns: a list of jobinfo objects (|neomake-object-jobinfo|).

Deprecated interface (with different return value)~
The old and deprecated API will accept the following arguments instead of the
`options` dict: filemode, enabled_makers[, exit_callback].
The `exit_callback` (which should get replaced by using the
|NeomakeJobFinished| or |NeomakeFinished| hooks) gets the following dictionary
as its sole argument: >
    { 'status': <exit status of maker>,
    \ 'name': <maker name>,
    \ 'has_next': <1 if another maker follows, 0 otherwise> }
Returns: a list of job ids.

*neomake#Sh* (command[, callback])
This function is called by the |:NeomakeSh| command. It runs the specified
shell `command` according to 'shell'. |neomake#Sh| returns the single job id
that was created (-1 on Vim without asynchronous support); you can potentially
cancel this job with |neomake#CancelJob|.

It also accepts a second, optional callback argument that is called when
the command exits. The callback is given the following dictionary as its
sole argument: >
    { 'status': <exit status of command>,
    \ 'name': 'sh: <command>',
    \ 'has_next': 0 }
<
The callback will receive a `jobinfo` object dict as `self`
(|dict-functions|).

*neomake#ListJobs*
Invoked via |:NeomakeListJobs|. Echoes a list of running jobs in the format
(job_id, job_name).

*neomake#CancelJob*
Invoked via |:NeomakeCancelJob|. Terminate a job identified by its job_id.
Example: >
    let job_id = neomake#Sh("bash -c 'while true; do sleep 1; done'")
    call neomake#CancelJob(job_id)

*neomake#signs#RedefineErrorSign*
*neomake#signs#RedefineWarningSign*
These functions define the error sign and the warning sign respectively. They
optionally take a dictionary in the same format as |g:neomake_error_sign|. If
no such dictionary is provided, the default values will be used. These
functions may be useful if somehow |:Neomake| is being invoked before you
define |g:neomake_error_sign|. >
    let g:neomake_error_sign = {'text': 'D:'}
    call neomake#signs#RedefineErrorSign()
<
                                                          *neomake-statusline*
The main function for statusline integration is `neomake#statusline#get()`,
which caches the information retrieved from `neomake#statusline#get_status()`.

*neomake#statusline#get()* <bufnr> [options]
The function requires the buffer number as first argument, and an optional
dictionary.  You might want to use |g:actual_curbuf| for bufnr, if calling
`neomake#status#get()` from a statusline expression, but then highlights are
not evaluated, and you typically want to use this in a statusline function
(`'set statusline=%!MyStatusLine()'`) instead.

Returns a string for a 'statusline'.

The optional argument is a dictionary of options (see below).

The following example creates a custom 'statusline' function, where `a:active`
may reflect if the window is the current one (implementation not provided): >
    let neomake_status_str = neomake#statusline#get(bufnr, {
          \ 'format_running': '… ({{running_job_names}})',
          \ 'format_loclist_ok':
          \   (a:active ? '%#NeomakeStatusGood#' : '%*').'✓',
          \ 'format_quickfix_ok': '',
          \ 'format_quickfix_issues': (a:active ? '%s' : ''),
          \ 'format_status': '%%(%s'
          \   .(a:active ? '%%#StatColorHi2#' : '%%*')
          \   .'%%)',
          \ })
<
A simpler example: >
    let neomake_status_str = neomake#statusline#get(bufnr, {
          \ 'format_running': '… ({{running_job_names}})',
          \ 'format_loclist_ok': '✓',
          \ 'format_quickfix_ok': '',
          \ 'format_quickfix_issues': '%s',
          \ })
<
You can use the following options:

For location list items:~
  - format_loclist_unknown: format for when the status for location list
    issues is unknown, i.e. Neomake was not run on the current buffer.
    Default: `'?'`
  - format_loclist_ok: format for when there are no location list issues.
    Default: `'%#NeomakeStatusGood#✓%#NeomakeStatReset#'` (a checkmark using
    the NeomakeStatusGood highlight group).
  - format_loclist_type_X: format for location list issues of type X
    (E, W, I, …).
    Default: looks up "format_loclist_type_default" first, and then uses
    `' {{type}}:{{count}} '`, with an existing highlight group as prefix
    ("NeomakeStatColorTypeX" or "NeomakeStatColorDefault"), e.g.
  - format_loclist_type_default: default format for location list issues if
    "format_loclist_type_X" is not defined.
  - format_loclist_issues: format for wrapping all location list issues.
    Default: `'%s%%#NeomakeStatReset'` (used with |printf()|).

For quickfix list items:~
  - format_quickfix_ok: format for no quickfix issues.
    Default: `''`
  - format_quickfix_type_X: format for quickfix list issues of type X
    (E, W, I, …).
    Default: `' {{type}}:{{count}} '`
    Default: looks up "format_quickfix_type_default" first, and then uses
    `' Q{{type}}:{{count}} '`, with an existing highlight group as prefix
    ("NeomakeStatColorQuickfixTypeX" or "NeomakeStatColorQuickfixDefault").
  - format_quickfix_issues: format for wrapping all quickfix list issues.
    You can use an empty string to skip displaying quickfix issues, which can
    be useful for non-current windows.
    Default: `'%s%%#NeomakeStatReset'` (used with |printf()|).

Status related:~
  - format_status: used to wrap the whole status.
    This is a |printf()| format string, where `%s` gets replaced with the
    whole status (and any literal/non-printf `%` needs to be escaped as `%%`).
    Default: not used / `'%s'`
  - format_status_disabled: used to wrap the whole status when disabled.
    This is a |printf()| format string, where `%s` gets replaced with the
    whole status (and any literal/non-printf `%` needs to be escaped as `%%`).
    Default: `'{{disabled_info}} %s'`
  - format_disabled_info: The `disabled_info` placeholder from the
    "format_status_disabled" argument. There `disabled_scope` placeholder is
    available here. Default: `'{{disabled_scope}}-'`
  - format_status_enabled: used to wrap the whole status when enabled.
    This is a |printf()| format string, where `%s` gets replaced with the
    whole status (and any literal/non-printf `%` needs to be escaped as `%%`).
    Default: not used / `'%s'`

General:~
  - format_lists: used to format the overall location list and quickfix list
    sections (before format_status).
    `{{lists_sep}}` is empty ("") with only a single list section,
    and defaults to " " if both are not empty.
    Default: `'{{loclist}}{{lists_sep}}{{quickfix}}'`

Running jobs:~
  If any jobs are currently running in file or project mode, those get
  displayed by default in the loclist or quickfix section.  The following
  options control its appearance:

  - format_running: used in case there are jobs running.  Use 0 (as a number)
    to disable this, but fall through to the last known status.
    Default: `… ({{running_job_names}})`
  - format_running_job_file: Wrap the running job name for file-level makers.
    Default: not used / `'%s'`
  - format_running_job_project: Wrap the running job name for project makers.
    Default: `'%s!'`.
  - running_jobs_separator: Separator for formatted running job names.
    Default: `', '`.

Advanced options:~

  - use_highlights_with_defaults: include highlight attributes with default
    options (e.g. "%#NeomakeStatusGood#" with "format_loclist_ok").
    Default: 1

You can use the following format placeholders:
  - `{{running_job_names}}}`: comma-separated list of running jobs (typically
    their maker names).
    This gets built using `format_running_job_file`,
    `format_running_job_project`, and `running_jobs_separator`.
  - `{{disabled_scope}}`: When manually overriden, the scope of the disabling.
    One of "b", "t", "g".

*neomake#statusline#LoclistStatus*
*neomake#statusline#QflistStatus*
These functions return text for your 'statusline'. They each take an
optional first argument, which is the prefix text that will be shown if errors
or warnings exist. Example usage: >
    set statusline+=\ %#ErrorMsg#%{neomake#statusline#QflistStatus('qf:\ ')}
<
The result of this will be something like 'qf: E:1, W:2' if there are errors
or warnings and the empty string otherwise.

*neomake#statusline#LoclistCounts*
*neomake#statusline#QflistCounts*
These functions get the counts of errors by error type for the |location-list|
and the |quickfix| respectively. The return value is something like this: >
    {'E': 2, 'W': 1, 'x': 5}
<Where 'E', 'W' and 'x' are error types. Empty error types are ignored for
now.

By default, `LoclistCounts` returns the counts for the current buffer (i.e.
`bufnr("%")`), but you can pass an optional argument: passing a buffer number
will retrieve the counts for a particular buffer, while passing the string
"`all`" will return a dictionary of counts for all buffers.

==============================================================================
5. Autocommands/Hooks                                       *neomake-autocmds*
                                                               *neomake-hooks*
Neomake will trigger |User| autocommands on certain events.
With all these events a dictionary `g:neomake_hook_context` is available,
with key/value pairs depending on the autocommand/hook.

Example: display a message for every maker that exits non-zero: >
    function! MyOnNeomakeJobFinished() abort
      let context = g:neomake_hook_context
      if context.jobinfo.exit_code != 0
        echom printf('The job for maker %s exited non-zero: %s',
        \ context.jobinfo.maker.name, context.jobinfo.exit_code)
      endif
    endfunction
    augroup my_neomake_hooks
        au!
        autocmd User NeomakeJobFinished call MyOnNeomakeJobFinished()
    augroup END
<
Note: you might want to use |autocmd-nested| (in particular when handling
opening of the location/quickfix window yourself, so that other autocommands
get triggered, e.g. |WinEnter| for the qf window that gets opened/created): >
    augroup my_neomake_hooks
        au!
        autocmd User NeomakeFinished nested call MyOnNeomakeFinished()
    augroup END
<
                                                              *NeomakeJobInit*
The NeomakeJobInit autocommand gets triggered before a job gets started.
You can use this to change the command (`jobinfo.argv`).
Context:
 - `g:neomake_hook_context.jobinfo`: see |neomake-object-jobinfo|.
   The `argv` entry contains the command to run (executable and arguments).
   This can be a list or a string, depending on the maker and the job backend.

                                                           *NeomakeJobStarted*
The NeomakeJobStarted autocommand gets triggered after a job started.
Context:
 - `g:neomake_hook_context.jobinfo`: see |neomake-object-jobinfo|.

                                                        *NeomakeCountsChanged*
The NeomakeCountsChanged user autocommand gets triggered after counts for the
location/quickfix list have changed, either because the list got reset or new
entries got added.
You can use this to e.g. update the statusline.
Context:
 - `g:neomake_hook_context.reset`: 1 if the list got reset, 0 otherwise.
 - `g:neomake_hook_context.jobinfo`: when the list is not reset; see
   |neomake-object-jobinfo|.

                                                             *NeomakeFinished*
The NeomakeFinished user autocommand gets triggered after all jobs of a build
have finished.
You can use this to e.g. close an empty location or quickfix window.
Context:
 - `g:neomake_hook_context`: a dictionary with the following keys:
   - `make_info`: make info, which contains all of the entries from below,
     plus some more.  (The object itself is not documented yet)
   - `make_id`: the numeric ID of the make run.
   - `options`: a dictionary (related to |neomake-object-jobinfo|):
     - `file_mode`
     - `bufnr`
     - `ft`
   - `finished_jobs`: a list of job infos (|neomake-object-jobinfo|) for the
     finished jobs.

                                                          *NeomakeJobFinished*
The NeomakeJobFinished autocommand gets triggered after a single job has
finished.
Context:
 - `g:neomake_hook_context.jobinfo`: see |neomake-object-jobinfo|; `exit_code`
   is available there.

==============================================================================
5. Objects                                                   *neomake-objects*

                                                      *neomake-object-jobinfo*
The `jobinfo` dictionary contains information about a job.
(this is experimental, so not everything is documented)
 - `maker`: a dictionary containing information about the maker that ran
   this job.  See |neomake-object-maker|.
 - `file_mode`: 1 for file mode, 0 for project/directory mode.
 - `make_id`: the ID of the make run
 - `get_pid()`: get the process ID (PID) of the job (-1 if not running
                anymore).

 - Relevant for file mode:
   - `bufnr`: the number of the buffer.
   - `ft`: the filetype.
                                                        *neomake-object-maker*
The `maker` dictionary contains the following keys:
(this is experimental, so not everything is documented)
 - `name`: name of the maker.
 - `exe`: executable of the maker.

==============================================================================
6. Frequently Asked Questions (FAQ)                              *neomake-faq*

6.1 Other plugins overwrite the signs placed by Neomake~

When using quickfixsigns (https://github.com/tomtom/quickfixsigns_vim/) it
will also place signs for errors and warnings in the quickfix/location list,
and conflicts therefore with Neomake's own signs (see
|g:neomake_place_signs|). You can make quickfixsigns respect Neomake's signs
using this option: >

    let g:quickfixsigns_protect_sign_rx = '^neomake_'
<
6.2 How to configure the makers to be used?~

See |g:neomake_<ft>_enabled_makers| (press `<C-]>` on the link to go there).

                                                     *neomake-faq-errorformat*
6.3 How to develop/debug the errorformat setting?~

Here are some tips to develop the 'errorformat' setting for makers:

1. Get the output from the linter into a buffer (see also |:read!|).
2. Set the errorformat, e.g. `:let &efm = '%E%f:%l:%c\,%n: %m,%Z%m`.
   See |errorformat| for documentation of the format itself.
3. Load the buffer into the quickfix list: `:cgetbuffer`.
4. Use |:copen| to open the quickfix window, and/or `:echo getqflist()` to
   display the raw data.
5. Pay attention to the "`valid`" property of entries.

vim: ft=help tw=78 isk+=<,>,\:,-,'