Gaze/SpaceVim
1
0
Fork 0
mirror of https://github.com/SpaceVim/SpaceVim.git synced 2025-03-20 06:55:41 +08:00
Code Issues Projects Releases Wiki Activity
SpaceVim/doc/SpaceVim.txt

2782 lines
96 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

*SpaceVim.txt*
/###### /## /##/##
/##__ ## | ## | #|__/
| ## \__/ /###### /###### /####### /######| ## | ##/##/######/####
| ###### /##__ ##|____ ##/##_____//##__ #| ## / ##| #| ##_ ##_ ##
\____ #| ## \ ## /######| ## | ########\ ## ##/| #| ## \ ## \ ##
/## \ #| ## | ##/##__ #| ## | ##_____/ \ ###/ | #| ## | ## | ##
| ######| #######| ######| ######| ####### \ #/ | #| ## | ## | ##
\______/| ##____/ \_______/\_______/\_______/ \_/ |__|__/ |__/ |__/
| ##
| ##
|__/
wsdjeg *spacevim* *SpaceVim*
==============================================================================
CONTENTS *SpaceVim-contents*
1. Introduction.............................................|SpaceVim-intro|
2. Options................................................|SpaceVim-options|
1. autocomplete_method............|SpaceVim-options-autocomplete_method|
2. autocomplete_parens............|SpaceVim-options-autocomplete_parens|
3. bootstrap_after....................|SpaceVim-options-bootstrap_after|
4. bootstrap_before..................|SpaceVim-options-bootstrap_before|
5. buffer_index_type................|SpaceVim-options-buffer_index_type|
6. checkinstall..........................|SpaceVim-options-checkinstall|
7. code_runner_focus................|SpaceVim-options-code_runner_focus|
8. colorscheme............................|SpaceVim-options-colorscheme|
9. colorscheme_bg......................|SpaceVim-options-colorscheme_bg|
10. data_dir.................................|SpaceVim-options-data_dir|
11. default_custom_leader.......|SpaceVim-options-default_custom_leader|
12. default_indent.....................|SpaceVim-options-default_indent|
13. enable_bepo_layout.............|SpaceVim-options-enable_bepo_layout|
14. enable_cursorcolumn...........|SpaceVim-options-enable_cursorcolumn|
15. enable_cursorline...............|SpaceVim-options-enable_cursorline|
16. enable_debug.........................|SpaceVim-options-enable_debug|
17. enable_googlesuggest.........|SpaceVim-options-enable_googlesuggest|
18. enable_guicolors.................|SpaceVim-options-enable_guicolors|
19. enable_key_frequency.........|SpaceVim-options-enable_key_frequency|
20. enable_projects_cache.......|SpaceVim-options-enable_projects_cache|
21. enable_statusline_bfpath.|SpaceVim-options-enable_statusline_bfpath|
22. enable_statusline_mode.....|SpaceVim-options-enable_statusline_mode|
23. enable_statusline_tag.......|SpaceVim-options-enable_statusline_tag|
24. enable_tabline_ft_icon.....|SpaceVim-options-enable_tabline_ft_icon|
25. enable_vimfiler_welcome...|SpaceVim-options-enable_vimfiler_welcome|
26. enable_ycm.............................|SpaceVim-options-enable_ycm|
27. error_symbol.........................|SpaceVim-options-error_symbol|
28. escape_key_binding.............|SpaceVim-options-escape_key_binding|
29. file_searching_tools.........|SpaceVim-options-file_searching_tools|
30. filemanager...........................|SpaceVim-options-filemanager|
31. filetree_direction.............|SpaceVim-options-filetree_direction|
32. guifont...................................|SpaceVim-options-guifont|
33. home_files_number...............|SpaceVim-options-home_files_number|
34. info_symbol...........................|SpaceVim-options-info_symbol|
35. keep_server_alive...............|SpaceVim-options-keep_server_alive|
36. language.................................|SpaceVim-options-language|
37. lint_engine...........................|SpaceVim-options-lint_engine|
38. lint_on_the_fly...................|SpaceVim-options-lint_on_the_fly|
39. max_column.............................|SpaceVim-options-max_column|
40. plugin_bundle_dir...............|SpaceVim-options-plugin_bundle_dir|
41. plugin_manager_processes.|SpaceVim-options-plugin_manager_processes|
42. project_auto_root...............|SpaceVim-options-project_auto_root|
43. project_rooter_outermost.|SpaceVim-options-project_rooter_outermost|
44. project_rooter_patterns...|SpaceVim-options-project_rooter_patterns|
45. projects_cache_num.............|SpaceVim-options-projects_cache_num|
46. realtime_leader_guide.......|SpaceVim-options-realtime_leader_guide|
47. relativenumber.....................|SpaceVim-options-relativenumber|
48. retry_cnt...............................|SpaceVim-options-retry_cnt|
49. search_tools.........................|SpaceVim-options-search_tools|
50. sidebar_width.......................|SpaceVim-options-sidebar_width|
51. snippet_engine.....................|SpaceVim-options-snippet_engine|
52. statusline_iseparator.......|SpaceVim-options-statusline_iseparator|
53. statusline_left_sections.|SpaceVim-options-statusline_left_sections|
54. statusline_separator.........|SpaceVim-options-statusline_separator|
55. statusline_unicode.............|SpaceVim-options-statusline_unicode|
56. terminal_cursor_shape.......|SpaceVim-options-terminal_cursor_shape|
57. vim_help_language...............|SpaceVim-options-vim_help_language|
58. vimcompatible.......................|SpaceVim-options-vimcompatible|
59. warning_symbol.....................|SpaceVim-options-warning_symbol|
60. windows_index_type.............|SpaceVim-options-windows_index_type|
61. windows_leader.....................|SpaceVim-options-windows_leader|
62. windows_smartclose.............|SpaceVim-options-windows_smartclose|
3. Configuration...........................................|SpaceVim-config|
4. Commands..............................................|SpaceVim-commands|
5. Functions............................................|SpaceVim-functions|
6. Layers..................................................|SpaceVim-layers|
1. autocomplete...........................|SpaceVim-layers-autocomplete|
2. checkers...................................|SpaceVim-layers-checkers|
3. colorscheme.............................|SpaceVim-layers-colorscheme|
4. core...........................................|SpaceVim-layers-core|
5. core#statusline.....................|SpaceVim-layers-core-statusline|
6. core#tabline...........................|SpaceVim-layers-core-tabline|
7. cscope.......................................|SpaceVim-layers-cscope|
8. exprfold...................................|SpaceVim-layers-exprfold|
9. format.......................................|SpaceVim-layers-format|
10. git............................................|SpaceVim-layers-git|
11. github......................................|SpaceVim-layers-github|
12. gtags........................................|SpaceVim-layers-gtags|
13. incsearch................................|SpaceVim-layers-incsearch|
14. indentmove..............................|SpaceVim-layers-indentmove|
15. lang#actionscript................|SpaceVim-layers-lang-actionscript|
16. lang#agda................................|SpaceVim-layers-lang-agda|
17. lang#asciidoc........................|SpaceVim-layers-lang-asciidoc|
18. lang#asepctj..........................|SpaceVim-layers-lang-asepctj|
19. lang#assembly........................|SpaceVim-layers-lang-assembly|
20. lang#autohotkey....................|SpaceVim-layers-lang-autohotkey|
21. lang#autoit............................|SpaceVim-layers-lang-autoit|
22. lang#batch..............................|SpaceVim-layers-lang-batch|
23. lang#c......................................|SpaceVim-layers-lang-c|
24. lang#chapel............................|SpaceVim-layers-lang-chapel|
25. lang#clojure..........................|SpaceVim-layers-lang-clojure|
26. lang#coffeescript................|SpaceVim-layers-lang-coffeescript|
27. lang#crystal..........................|SpaceVim-layers-lang-crystal|
28. lang#csharp............................|SpaceVim-layers-lang-csharp|
29. lang#d......................................|SpaceVim-layers-lang-d|
30. lang#dart................................|SpaceVim-layers-lang-dart|
31. lang#dockerfile....................|SpaceVim-layers-lang-dockerfile|
32. lang#e......................................|SpaceVim-layers-lang-e|
33. lang#eiffel............................|SpaceVim-layers-lang-eiffel|
34. lang#elixir............................|SpaceVim-layers-lang-elixir|
35. lang#elm..................................|SpaceVim-layers-lang-elm|
36. lang#erlang............................|SpaceVim-layers-lang-erlang|
37. lang#extra..............................|SpaceVim-layers-lang-extra|
38. lang#fennel............................|SpaceVim-layers-lang-fennel|
39. lang#forth..............................|SpaceVim-layers-lang-forth|
40. lang#fortran..........................|SpaceVim-layers-lang-fortran|
41. lang#foxpro............................|SpaceVim-layers-lang-foxpro|
42. lang#fsharp............................|SpaceVim-layers-lang-fsharp|
43. lang#go....................................|SpaceVim-layers-lang-go|
44. lang#goby................................|SpaceVim-layers-lang-goby|
45. lang#gosu................................|SpaceVim-layers-lang-gosu|
46. lang#graphql..........................|SpaceVim-layers-lang-graphql|
47. lang#groovy............................|SpaceVim-layers-lang-groovy|
48. lang#hack................................|SpaceVim-layers-lang-hack|
49. lang#haskell..........................|SpaceVim-layers-lang-haskell|
50. lang#html................................|SpaceVim-layers-lang-html|
51. lang#hy....................................|SpaceVim-layers-lang-hy|
52. lang#idris..............................|SpaceVim-layers-lang-idris|
53. lang#io....................................|SpaceVim-layers-lang-io|
54. lang#j......................................|SpaceVim-layers-lang-j|
55. lang#janet..............................|SpaceVim-layers-lang-janet|
56. lang#java................................|SpaceVim-layers-lang-java|
57. lang#javascript....................|SpaceVim-layers-lang-javascript|
58. lang#json................................|SpaceVim-layers-lang-json|
59. lang#julia..............................|SpaceVim-layers-lang-julia|
60. lang#kotlin............................|SpaceVim-layers-lang-kotlin|
61. lang#latex..............................|SpaceVim-layers-lang-latex|
62. lang#lisp................................|SpaceVim-layers-lang-lisp|
63. lang#livescript....................|SpaceVim-layers-lang-livescript|
64. lang#lua..................................|SpaceVim-layers-lang-lua|
65. lang#markdown........................|SpaceVim-layers-lang-markdown|
66. lang#moonscript....................|SpaceVim-layers-lang-moonscript|
67. lang#nim..................................|SpaceVim-layers-lang-nim|
68. lang#nix..................................|SpaceVim-layers-lang-nix|
69. lang#ocaml..............................|SpaceVim-layers-lang-ocaml|
70. lang#pact................................|SpaceVim-layers-lang-pact|
71. lang#pascal............................|SpaceVim-layers-lang-pascal|
72. lang#perl................................|SpaceVim-layers-lang-perl|
73. lang#php..................................|SpaceVim-layers-lang-php|
74. lang#pony................................|SpaceVim-layers-lang-pony|
75. lang#processing....................|SpaceVim-layers-lang-processing|
76. lang#prolog............................|SpaceVim-layers-lang-prolog|
77. lang#puppet............................|SpaceVim-layers-lang-puppet|
78. lang#purescript....................|SpaceVim-layers-lang-purescript|
79. lang#python............................|SpaceVim-layers-lang-python|
80. lang#racket............................|SpaceVim-layers-lang-racket|
81. lang#racket...............................|SpaceVim-layers-lang-red|
82. lang#reason............................|SpaceVim-layers-lang-reason|
83. lang#ring...................................|SpaceVim-layers-lang-r|
84. lang#ring................................|SpaceVim-layers-lang-ring|
85. lang#ruby................................|SpaceVim-layers-lang-ruby|
86. lang#rust................................|SpaceVim-layers-lang-rust|
87. lang#scala..............................|SpaceVim-layers-lang-scala|
88. lang#scheme............................|SpaceVim-layers-lang-scheme|
89. lang#sh....................................|SpaceVim-layers-lang-sh|
90. lang#smalltalk......................|SpaceVim-layers-lang-smalltalk|
91. lang#sml..................................|SpaceVim-layers-lang-sml|
92. lang#swig...............................|SpaceVim-layers-lang-swift|
93. lang#swig................................|SpaceVim-layers-lang-swig|
94. lang#tcl..................................|SpaceVim-layers-lang-tcl|
95. lang#toml................................|SpaceVim-layers-lang-toml|
96. lang#typescript....................|SpaceVim-layers-lang-typescript|
97. lang#v......................................|SpaceVim-layers-lang-v|
98. lang#vbnet..............................|SpaceVim-layers-lang-vbnet|
99. lang#vim..................................|SpaceVim-layers-lang-vim|
100. lang#vue.................................|SpaceVim-layers-lang-vue|
101. lang#wolfram.........................|SpaceVim-layers-lang-wolfram|
102. lang#xml.................................|SpaceVim-layers-lang-xml|
103. lang#xquery...........................|SpaceVim-layers-lang-xquery|
104. lang#zig.................................|SpaceVim-layers-lang-zig|
105. language server protocol......................|SpaceVim-layers-lsp|
106. leaderf...................................|SpaceVim-layers-leaderf|
107. operator.................................|SpaceVim-layers-operator|
108. shell.......................................|SpaceVim-layers-shell|
109. test.........................................|SpaceVim-layers-test|
110. tmux.........................................|SpaceVim-layers-tmux|
111. tools#dash.............................|SpaceVim-layers-tools-dash|
112. tools#mpv...............................|SpaceVim-layers-tools-mpv|
113. tools#zeal.............................|SpaceVim-layers-tools-zeal|
114. treesitter.............................|SpaceVim-layers-treesitter|
115. ui.............................................|SpaceVim-layers-ui|
116. unite.......................................|SpaceVim-layers-unite|
7. Usage....................................................|SpaceVim-usage|
1. buffers-and-files..................|SpaceVim-usage-buffers-and-files|
2. custom_plugins........................|SpaceVim-usage-custom_plugins|
3. repl............................................|SpaceVim-usage-repl|
4. tasks..........................................|SpaceVim-usage-tasks|
8. API........................................................|SpaceVim-api|
1. cmdlinemenu................................|SpaceVim-api-cmdlinemenu|
2. data#dict....................................|SpaceVim-api-data-dict|
3. data#list....................................|SpaceVim-api-data-list|
4. data#number................................|SpaceVim-api-data-number|
5. data#string................................|SpaceVim-api-data-string|
6. job................................................|SpaceVim-api-job|
7. logger..........................................|SpaceVim-api-logger|
8. password......................................|SpaceVim-api-password|
9. prompt..........................................|SpaceVim-api-prompt|
10. sid...........................................|SpaceVim-api-vim-sid|
11. system.........................................|SpaceVim-api-system|
12. unicode#box...............................|SpaceVim-api-unicode-box|
13. vim#buffer.................................|SpaceVim-api-vim-buffer|
14. vim#buffer.................................|SpaceVim-api-vim-window|
15. vim#command...............................|SpaceVim-api-vim-command|
16. vim#compatible.........................|SpaceVim-api-vim-compatible|
17. vim#message...............................|SpaceVim-api-vim-message|
9. Development................................................|SpaceVim-dev|
1. commit-style-guide..................|SpaceVim-dev-commit-style-guide|
10. FAQ.......................................................|SpaceVim-faq|
11. Changelog...........................................|SpaceVim-changelog|
==============================================================================
INTRODUCTION *SpaceVim-intro*
SpaceVim is a bundle of custom settings and plugins with a modular
configuration for Vim. It was inspired by Spacemacs.
==============================================================================
OPTIONS *SpaceVim-options*
SpaceVim uses `~/.SpaceVim.d/init.toml` as its default global config file. You
can set all the SpaceVim options and layers in it. `~/.SpaceVim.d/` will also
be added to runtimepath, so you can write your own scripts in it. SpaceVim
also supports local config for each project. Place local config settings in
`.SpaceVim.d/init.toml` in the root directory of your project. `.SpaceVim.d/`
will also be added to runtimepath.
here is an example setting SpaceVim options:
>
[options]
enable-guicolors = true
max-column = 120
<
==============================================================================
AUTOCOMPLETE_METHOD *SpaceVim-options-autocomplete_method*
Set the autocomplete engine of spacevim, the default logic is:
>
if has('python3')
let g:spacevim_autocomplete_method = 'deoplete'
elseif has('lua')
let g:spacevim_autocomplete_method = 'neocomplete'
elseif has('python')
let g:spacevim_autocomplete_method = 'completor'
elseif has('timers')
let g:spacevim_autocomplete_method = 'asyncomplete'
else
let g:spacevim_autocomplete_method = 'neocomplcache'
endif
<
and you can alse set this option to coc, then coc.nvim will be used.
==============================================================================
AUTOCOMPLETE_PARENS *SpaceVim-options-autocomplete_parens*
Enable/Disable autocompletion of parentheses, default is true (enabled).
>
autocomplete_parens = false
<
==============================================================================
BOOTSTRAP_AFTER *SpaceVim-options-bootstrap_after*
set the bootstrap_after function, this function will be called on `VimEnter`
event.
>
[options]
bootstrap_after = 'myspacevim#after'
<
==============================================================================
BOOTSTRAP_BEFORE *SpaceVim-options-bootstrap_before*
set the bootstrap_before function, this function will be called when loading
custom configuration file. for example:
>
[options]
bootstrap_before = 'myspacevim#before'
<
==============================================================================
BUFFER_INDEX_TYPE *SpaceVim-options-buffer_index_type*
Set SpaceVim buffer index type, default is 4.
>
# types:
# 0: 1 ➛ ➊
# 1: 1 ➛ ➀
# 2: 1 ➛ ⓵
# 3: 1 ➛ ¹
# 4: 1 ➛ 1
buffer_index_type = 1
<
==============================================================================
CHECKINSTALL *SpaceVim-options-checkinstall*
Enable/Disable checkinstall on SpaceVim startup. Default is true.
>
checkinstall = true
<
==============================================================================
CODE_RUNNER_FOCUS *SpaceVim-options-code_runner_focus*
enable/disable code runner window focus mode, by default this option is
`false`, to enable this mode, set this option to `true`.
>
code_runner_focus = true
<
==============================================================================
COLORSCHEME *SpaceVim-options-colorscheme*
The colorscheme of SpaceVim. Default is 'gruvbox'.
==============================================================================
COLORSCHEME_BG *SpaceVim-options-colorscheme_bg*
The background of colorscheme. Default is 'dark'.
==============================================================================
DATA_DIR *SpaceVim-options-data_dir*
Set the cache directory of SpaceVim. Default is `$XDG_CACHE_HOME` or if not
set `~/.cache¸.
>
data_dir = "~/.cache"
<
==============================================================================
DEFAULT_CUSTOM_LEADER *SpaceVim-options-default_custom_leader*
Change the default custom leader of SpaceVim. Default is <Space>.
>
default_custom_leader = "<Space>"
<
==============================================================================
DEFAULT_INDENT *SpaceVim-options-default_indent*
Change the default indentation of SpaceVim. Default is 2.
>
default_indent = 2
<
==============================================================================
ENABLE_BEPO_LAYOUT *SpaceVim-options-enable_bepo_layout*
Enable/Disable bepo layout, by default it is disabled.
>
enable_bepo_layout = true
<
==============================================================================
ENABLE_CURSORCOLUMN *SpaceVim-options-enable_cursorcolumn*
Enable/Disable cursorcolumn. Default is 0, cursorcolumn will be highlighted in
normal mode. To enable this feature:
>
enable_cursorcolumn = true
<
==============================================================================
ENABLE_CURSORLINE *SpaceVim-options-enable_cursorline*
Enable/Disable cursorline. Default is true, cursorline will be highlighted in
normal mode.To disable this feature:
>
enable_cursorline = false
<
==============================================================================
ENABLE_DEBUG *SpaceVim-options-enable_debug*
Enable/Disable debug mode for SpaceVim. Default is false.
>
enable_debug = true
<
==============================================================================
ENABLE_GOOGLESUGGEST *SpaceVim-options-enable_googlesuggest*
Enable/Disable Google suggestions for neocomplete. Default is false.
>
enable_googlesuggest = false
<
==============================================================================
ENABLE_GUICOLORS *SpaceVim-options-enable_guicolors*
Enable true color support in terminal. Default is false.
>
enable_guicolors = true
<
==============================================================================
ENABLE_KEY_FREQUENCY *SpaceVim-options-enable_key_frequency*
Enable/Disable key frequency catching of SpaceVim. default value is 0. to
enable it:
>
enable_key_frequency = true
<
==============================================================================
ENABLE_PROJECTS_CACHE *SpaceVim-options-enable_projects_cache*
Enable/Disable cross session projects cache. Enabled by default.
==============================================================================
ENABLE_STATUSLINE_BFPATH *SpaceVim-options-enable_statusline_bfpath*
Enable/Disable showing full path of current buffer on statusline, disabled by
default, to enable this feature:
>
enable_statusline_bfpath = true
<
==============================================================================
ENABLE_STATUSLINE_MODE *SpaceVim-options-enable_statusline_mode*
Enable/Disable display mode. Default is 0, mode will be displayed in
statusline. To enable this feature:
>
enable_statusline_mode = true
<
==============================================================================
ENABLE_STATUSLINE_TAG *SpaceVim-options-enable_statusline_tag*
Enable/Disable showing current tag on statusline
>
enable_statusline_tag = false
<
==============================================================================
ENABLE_TABLINE_FT_ICON *SpaceVim-options-enable_tabline_ft_icon*
Enable/Disable tabline filetype icon. default is false. To enable this
feature:
>
enable_tabline_ft_icon = true
<
==============================================================================
ENABLE_VIMFILER_WELCOME *SpaceVim-options-enable_vimfiler_welcome*
Enable/Disable vimfiler in the welcome windows. Default is true. This will
cause vim to start up slowly if there are too many files in the current
directory.
>
enable_vimfiler_welcome = false
<
==============================================================================
ENABLE_YCM *SpaceVim-options-enable_ycm*
Enable/Disable YouCompleteMe. Default is false.
>
enable_ycm = true
<
==============================================================================
ERROR_SYMBOL *SpaceVim-options-error_symbol*
Set the error symbol for SpaceVim's syntax maker. Default is '✖'.
>
error_symbol = "+"
<
==============================================================================
ESCAPE_KEY_BINDING *SpaceVim-options-escape_key_binding*
Set the key binding for switch to normal mode in insert mode. Default is `jk`,
to disable this key binding, set this option to empty string.
>
escape_key_binding = 'jk'
<
==============================================================================
FILE_SEARCHING_TOOLS *SpaceVim-options-file_searching_tools*
Set the default file searching tool used by `SPC f /`, by default it is `[]`.
The first item in this list is the name of the tool, the second one is the
default command. for example:
>
file_searching_tools = ['find', 'find -not -iwholename "*.git*" ']
<
==============================================================================
FILEMANAGER *SpaceVim-options-filemanager*
The default file manager of SpaceVim. Default is 'nerdtree'. you can also use
defx or vimfiler
==============================================================================
FILETREE_DIRECTION *SpaceVim-options-filetree_direction*
Config the direction of file tree. Default is 'right'. you can also set to
'left'.
NOTE: if it is 'left', the tagbar will be move to right.
==============================================================================
GUIFONT *SpaceVim-options-guifont*
Set the guifont of SpaceVim. Default is empty.
>
guifont = "SauceCodePro Nerd Font Mono:h11"
<
==============================================================================
HOME_FILES_NUMBER *SpaceVim-options-home_files_number*
Change the list number of files for SpaceVim home. Default is 6.
>
home_files_number = 6
<
==============================================================================
INFO_SYMBOL *SpaceVim-options-info_symbol*
Set the information symbol for SpaceVim's syntax maker. Default is '🛈'.
>
info_symbol = 'i'
<
==============================================================================
KEEP_SERVER_ALIVE *SpaceVim-options-keep_server_alive*
Option for keep the spacevim server ailive
==============================================================================
LANGUAGE *SpaceVim-options-language*
Set the message language of vim. Default is 'en_US.UTF-8'.
>
language = 'en_CA.utf8'
<
==============================================================================
LINT_ENGINE *SpaceVim-options-lint_engine*
Set the lint engine used in checkers layer, the default engine is neomake, if
you want to use ale, use:
>
lint_engine = 'ale'
<
NOTE: the `enable_neomake` and `enable_ale` option has been deprecated.
*spacevim-options-enable_naomake* *spacevim-options-enable_ale*
==============================================================================
LINT_ON_THE_FLY *SpaceVim-options-lint_on_the_fly*
Enable/Disable lint on the fly feature of SpaceVim's maker. Default is true.
>
lint_on_the_fly = false
<
==============================================================================
MAX_COLUMN *SpaceVim-options-max_column*
Change the max number of columns for SpaceVim. Default is 120.
>
max_column = 120
<
==============================================================================
PLUGIN_BUNDLE_DIR *SpaceVim-options-plugin_bundle_dir*
Set the cache directory of plugins. Default is `$data_dir/vimfiles`.
>
plugin_bundle_dir = "~/.cache/vimplugs"
<
==============================================================================
PLUGIN_MANAGER_PROCESSES *SpaceVim-options-plugin_manager_processes*
Set the max process of SpaceVim plugin manager
==============================================================================
PROJECT_AUTO_ROOT *SpaceVim-options-project_auto_root*
Enable/Disable project root detection. By default, SpaceVim will change the
directory to the project root directory based on `project_rooter_patterns`
option. To disable this feature:
>
[options]
project_auto_root = false
<
NOTE: *g:spacevim_project_rooter_automatically* and
*SpaceVim-options-project_rooter_automatically* are deprecated.
==============================================================================
PROJECT_ROOTER_OUTERMOST *SpaceVim-options-project_rooter_outermost*
Enable/Disable finding outermost directory for project root detection. By
default SpaceVim will find the outermost directory based on
`project_rooter_patterns`. To find nearest directory, you need to disable this
option:
>
[options]
project_rooter_outermost = false
<
==============================================================================
PROJECT_ROOTER_PATTERNS *SpaceVim-options-project_rooter_patterns*
Set the project root patterns, SpaceVim determines the root directory of the
project based on this option. By default it is:
>
['.git/', '_darcs/', '.hg/', '.bzr/', '.svn/']
<
==============================================================================
PROJECTS_CACHE_NUM *SpaceVim-options-projects_cache_num*
Setting the numbers of cached projects, by default it is 20.
==============================================================================
REALTIME_LEADER_GUIDE *SpaceVim-options-realtime_leader_guide*
Enable/Disable realtime leader guide. Default is true. to disable it:
>
realtime_leader_guide = false
<
==============================================================================
RELATIVENUMBER *SpaceVim-options-relativenumber*
Enable/Disable relativenumber, by default it is enabled.
>
relativenumber = true
<
==============================================================================
RETRY_CNT *SpaceVim-options-retry_cnt*
Set the number of retries for SpaceVim Update when failed. Default is 3. Set
to 0 to disable this feature, or you can set to another number.
>
update_retry_cnt = 3
<
==============================================================================
SEARCH_TOOLS *SpaceVim-options-search_tools*
Default search tools supported by flygrep. The default order is ['rg', 'ag',
'pt', 'ack', 'grep', 'findstr', 'git'] The `git` command means using
`git-grep`. If you prefer to use `git-grep` by default. You can change this
option to:
>
[options]
search_tools = ['git', 'rg', 'ag']
<
==============================================================================
SIDEBAR_WIDTH *SpaceVim-options-sidebar_width*
Set the width of the SpaceVim sidebar. Default is 30. This value will be used
by tagbar and filetree.
==============================================================================
SNIPPET_ENGINE *SpaceVim-options-snippet_engine*
Set the snippet engine of SpaceVim, default is neosnippet. to enable
ultisnips:
>
snippet_engine = "ultisnips"
<
==============================================================================
STATUSLINE_ISEPARATOR *SpaceVim-options-statusline_iseparator*
Set the statusline separators of statusline in inactive windows, default is
'nil'
>
Separators options:
1. arrow
2. curve
3. slant
4. nil
5. fire
<
See more details in: http://spacevim.org/documentation/#statusline
==============================================================================
STATUSLINE_LEFT_SECTIONS *SpaceVim-options-statusline_left_sections*
Define the left section of statusline in active windows. By default:
>
statusline_left_sections = [
'winnr',
'filename',
'major mode',
'minor mode lighters',
'version control info'
]
<
==============================================================================
STATUSLINE_SEPARATOR *SpaceVim-options-statusline_separator*
Set the statusline separators of statusline, default is 'nil'
>
Separators options:
1. arrow
2. curve
3. slant
4. nil
5. fire
<
See more details in: http://spacevim.org/documentation/#statusline
==============================================================================
STATUSLINE_UNICODE *SpaceVim-options-statusline_unicode*
Enable/Disable unicode symbols in statusline, includes the mode icons and
fileformat icons. This option is enabled by default, to disable it:
>
statusline_unicode = false
<
==============================================================================
TERMINAL_CURSOR_SHAPE *SpaceVim-options-terminal_cursor_shape*
Set the SpaceVim cursor shape in the terminal.
>
0 : to prevent Nvim from changing the cursor shape.
1 : to enable non-blinking mode-sensitive cursor.
2 : to enable blinking mode-sensitive cursor (default).
<
>
<
Host terminal must support the DECSCUSR CSI escape sequence. Depending on the
terminal emulator, using this option with nvim under tmux might require adding
the following to ~/.tmux.conf:
>
set -ga terminal-overrides ',*:Ss=\E[%p1%d q:Se=\E[2 q'
<
==============================================================================
VIM_HELP_LANGUAGE *SpaceVim-options-vim_help_language*
Set the help language of vim. Default is 'en'. You can change it to Chinese.
>
vim_help_language = "cn"
<
==============================================================================
VIMCOMPATIBLE *SpaceVim-options-vimcompatible*
Enable/Disable vimcompatible mode, by default it is false. to enable
vimcompatible mode, just add:
>
vimcompatible = true
<
In vimcompatible mode all vim origin key bindings will not be changed.
Includes:
>
q smart quit windows
s windows key bindings leader
, language specific leader
<C-a> move cursor to beginning in command line mode
<C-b> move cursor to left in command line mode
<C-f> move cursor to right in command line mode
<C-x> switch buffer
<
==============================================================================
WARNING_SYMBOL *SpaceVim-options-warning_symbol*
Set the warning symbol for SpaceVim's syntax maker. Default is '⚠'.
>
warning_symbol = '!'
<
==============================================================================
WINDOWS_INDEX_TYPE *SpaceVim-options-windows_index_type*
Set SpaceVim windows index type, default is 3.
>
# types:
# 0: 1 ➛ ➊
# 1: 1 ➛ ➀
# 2: 1 ➛ ⓵
# 3: 1 ➛ 1
windows_index_type = 1
<
==============================================================================
WINDOWS_LEADER *SpaceVim-options-windows_leader*
Window functions leader for SpaceVim. Default is `s`. Set to empty to disable
this feature, or you can set to another char.
>
windows_leader = ""
<
==============================================================================
WINDOWS_SMARTCLOSE *SpaceVim-options-windows_smartclose*
Set the default key for smart close windows, default is `q`. to disable this
feature, just set it to empty string:
>
windows_smartclose = ""
<
==============================================================================
CONFIGURATION *SpaceVim-config*
If you still want to use `~/.SpaceVim.d/init.vim` as configuration file,
please take a look at the following options.
*g:spacevim_version*
Version of SpaceVim , this value can not be changed.
*g:spacevim_default_indent*
Change the default indentation of SpaceVim. Default is 2.
>
let g:spacevim_default_indent = 2
<
*g:spacevim_expand_tab*
In Insert mode: Use the appropriate number of spaces to insert a <Tab>
*g:spacevim_relativenumber*
Enable/Disable relativenumber in current windows, by default it is enabled.
*g:spacevim_wrap_line*
Enable/Disable line wrap of vim
*g:spacevim_enable_bepo_layout*
Enable/Disable bepo layout, by default it is disabled.
*g:spacevim_max_column*
Change the max number of columns for SpaceVim. Default is 120.
>
let g:spacevim_max_column = 120
<
*g:spacevim_default_custom_leader*
Change the default custom leader of SpaceVim. Default is <Space>.
>
let g:spacevim_default_custom_leader = '<Space>'
<
*g:spacevim_home_files_number*
Change the list number of files for SpaceVim home. Default is 6.
>
let g:spacevim_home_files_number = 6
<
*g:spacevim_code_runner_focus*
enable/disable code runner window focus mode, by default this option is 0, to
enable this mode, set this option to 1.
*g:spacevim_enable_guicolors*
Enable true color support in terminal. Default is 0.
>
let g:spacevim_enable_guicolors = 1
<
*g:spacevim_escape_key_binding*
Set the key binding for switch to normal mode in insert mode. Default is `jk`,
to disable this key binding, set this option to empty string.
>
let g:spacevim_escape_key_binding = 'jk'
<
*g:spacevim_enable_googlesuggest*
Enable/Disable Google suggestions for neocomplete. Default is 0.
>
let g:spacevim_enable_googlesuggest = 1
<
*g:spacevim_windows_leader*
Window functions leader for SpaceVim. Default is `s`. Set to empty to disable
this feature, or you can set to another char.
>
let g:spacevim_windows_leader = ''
<
*g:spacevim_data_dir*
Set the cache directory of SpaceVim. Default is `$XDG_CACHE_HOME` or if not
set `~/.cache¸.
>
let g:spacevim_data_dir = '~/.cache'
<
*g:spacevim_plugin_bundle_dir*
Set the cache directory of plugins. Default is `$data_dir/vimfiles`.
>
let g:spacevim_plugin_bundle_dir = g:spacevim_data_dir.'vimplugs'
<
*g:spacevim_realtime_leader_guide*
Enable/Disable realtime leader guide. Default is 1. to disable it:
>
let g:spacevim_realtime_leader_guide = 0
<
*g:spacevim_enable_key_frequency*
Enable/Disable key frequency catching of SpaceVim. default value is 0. to
enable it:
>
let g:spacevim_enable_key_frequency = 1
<
*g:spacevim_autocomplete_method*
Set the autocomplete engine of spacevim, the default logic is:
>
if has('python3')
let g:spacevim_autocomplete_method = 'deoplete'
elseif has('lua')
let g:spacevim_autocomplete_method = 'neocomplete'
elseif has('python')
let g:spacevim_autocomplete_method = 'completor'
elseif has('timers')
let g:spacevim_autocomplete_method = 'asyncomplete'
else
let g:spacevim_autocomplete_method = 'neocomplcache'
endif
<
and you can alse set this option to coc, then coc.nvim will be used.
*g:spacevim_lint_engine*
Set the lint engine used in checkers layer, the default engine is neomake, if
you want to use ale, use:
>
let g:spacevim_lint_engine = 'ale'
<
*g:spacevim_guifont*
Set the guifont of SpaceVim. Default is empty.
>
let g:spacevim_guifont = "SauceCodePro Nerd Font Mono:h11"
<
*g:spacevim_enable_ycm*
Enable/Disable YouCompleteMe. Default is 0.
>
let g:spacevim_enable_ycm = 1
<
*g:spacevim_sidebar_width*
Set the width of the SpaceVim sidebar. Default is 30. This value will be used
by tagbar and filetree.
*g:spacevim_snippet_engine*
Set the snippet engine of SpaceVim, default is neosnippet. to enable
ultisnips:
>
let g:spacevim_snippet_engine = "ultisnips"
<
*g:spacevim_enable_cursorline*
Enable/Disable cursorline. Default is 1, cursorline will be highlighted in
normal mode.To disable this feature:
>
let g:spacevim_enable_cursorline = 0
<
*g:spacevim_statusline_separator*
Set the statusline separators of statusline, default is 'nil'
>
Separators options:
1. arrow
2. curve
3. slant
4. nil
5. fire
<
See more details in: http://spacevim.org/documentation/#statusline
*g:spacevim_statusline_iseparator*
Set the statusline separators of statusline in inactive windows, default is
'nil'
>
Separators options:
1. arrow
2. curve
3. slant
4. nil
5. fire
<
See more details in: http://spacevim.org/documentation/#statusline
*g:spacevim_enable_statusline_bfpath*
Enable/Disable showing full path of current buffer on statusline, disabled by
default, to enable this feature:
>
enable_statusline_bfpath = true
<
*g:spacevim_enable_statusline_tag*
Enable/Disable showing current tag on statusline
*g:spacevim_statusline_left_sections*
Define the left section of statusline in active windows. By default:
>
let g:spacevim_statusline_left_sections =
\ [
\ 'winnr',
\ 'filename',
\ 'major mode',
\ 'minor mode lighters',
\ 'version control info'
\ ]
<
*g:spacevim_statusline_right_sections*
Define the right section of statusline in active windows. By default:
>
g:spacevim_statusline_right_sections =
\ [
\ 'fileformat',
\ 'cursorpos',
\ 'percentage'
\ ]
<
*g:spacevim_statusline_unicode*
Enable/Disable unicode symbols in statusline, includes the mode icons and
fileformat icons. This option is enabled by default, to disable it:
>
let g:spacevim_statusline_unicode = 0
<
*g:spacevim_enable_language_specific_leader*
Enable/Disable language specific leader, by default you can use `,` ket
instead of `SPC` `l`.
*g:spacevim_enable_statusline_mode*
Enable/Disable display mode. Default is 0, mode will be displayed in
statusline. To enable this feature:
>
let g:spacevim_enable_statusline_mode = 1
<
*g:spacevim_custom_color_palette*
Set the statusline/tabline palette of color, default values depends on the
theme
>
let g:spacevim_custom_color_palette = [
\ ['#282828', '#b8bb26', 246, 235],
\ ['#a89984', '#504945', 239, 246],
\ ['#a89984', '#3c3836', 237, 246],
\ ['#665c54', 241],
\ ['#282828', '#83a598', 235, 109],
\ ['#282828', '#fe8019', 235, 208],
\ ['#282828', '#8ec07c', 235, 108],
\ ['#282828', '#689d6a', 235, 72],
\ ['#282828', '#8f3f71', 235, 132],
\ ]
<
*g:spacevim_enable_cursorcolumn*
Enable/Disable cursorcolumn. Default is 0, cursorcolumn will be highlighted in
normal mode. To enable this feature:
>
let g:spacevim_enable_cursorcolumn = 1
<
*g:spacevim_error_symbol*
Set the error symbol for SpaceVim's syntax maker. Default is '✖'.
>
let g:spacevim_error_symbol = '+'
<
*g:spacevim_warning_symbol*
Set the warning symbol for SpaceVim's syntax maker. Default is '⚠'.
>
let g:spacevim_warning_symbol = '!'
<
*g:spacevim_info_symbol*
Set the information symbol for SpaceVim's syntax maker. Default is '🛈'.
>
let g:spacevim_info_symbol = 'i'
<
*g:spacevim_terminal_cursor_shape*
Set the SpaceVim cursor shape in the terminal.
>
0 : to prevent Nvim from changing the cursor shape.
1 : to enable non-blinking mode-sensitive cursor.
2 : to enable blinking mode-sensitive cursor (default).
<
>
<
Host terminal must support the DECSCUSR CSI escape sequence. Depending on the
terminal emulator, using this option with nvim under tmux might require adding
the following to ~/.tmux.conf:
>
set -ga terminal-overrides ',*:Ss=\E[%p1%d q:Se=\E[2 q'
<
*g:spacevim_vim_help_language*
Set the help language of vim. Default is 'en'. You can change it to Chinese.
>
let g:spacevim_vim_help_language = 'cn'
<
*g:spacevim_language*
Set the message language of vim. Default is 'en_US.UTF-8'.
>
let g:spacevim_language = 'en_CA.utf8'
<
*g:spacevim_keep_server_alive*
Option for keep the spacevim server ailive
*g:spacevim_colorscheme*
The colorscheme of SpaceVim. Default is 'gruvbox'.
*g:spacevim_colorscheme_bg*
The background of colorscheme. Default is 'dark'.
*g:spacevim_colorscheme_default*
The default colorscheme of SpaceVim. Default is 'desert'. This colorscheme
will be used if the colorscheme set by `g:spacevim_colorscheme` is not
installed.
>
let g:spacevim_colorscheme_default = 'other_color'
<
*g:spacevim_filemanager*
The default file manager of SpaceVim. Default is 'nerdtree'. you can also use
defx or vimfiler
*g:spacevim_filetree_direction*
Config the direction of file tree. Default is 'right'. you can also set to
'left'.
NOTE: if it is 'left', the tagbar will be move to right.
*g:spacevim_plugin_manager_processes*
Set the max process of SpaceVim plugin manager
*g:spacevim_checkinstall*
Enable/Disable checkinstall on SpaceVim startup. Default is 1.
>
let g:spacevim_checkinstall = 1
<
*g:spacevim_vimcompatible*
Enable/Disable vimcompatible mode, by default it is false. to enable
vimcompatible mode, just add:
>
let g:spacevim_vimcompatible = 1
<
In vimcompatible mode all vim origin key bindings will not be changed.
Includes:
>
q smart quit windows
s windows key bindings leader
, language specific leader
<C-a> move cursor to beginning in command line mode
<C-b> move cursor to left in command line mode
<C-f> move cursor to right in command line mode
<C-x> switch buffer
<
*g:spacevim_enable_debug*
Enable/Disable debug mode for SpaceVim. Default is 0.
>
let g:spacevim_enable_debug = 1
<
*g:spacevim_auto_disable_touchpad*
Auto disable touchpad when switch to insert mode or focuslost in neovim.
*g:spacevim_debug_level*
Set the debug level of SpaceVim. Default is 1. see
|SpaceVim#logger#setLevel()|
*g:spacevim_buffer_index_type*
Set SpaceVim buffer index type, default is 4.
>
" types:
" 0: 1 ➛ ➊
" 1: 1 ➛ ➀
" 2: 1 ➛ ⓵
" 3: 1 ➛ ¹
" 4: 1 ➛ 1
let g:spacevim_buffer_index_type = 1
<
*g:spacevim_windows_index_type*
Set SpaceVim windows index type, default is 3.
>
" types:
" 0: 1 ➛ ➊
" 1: 1 ➛ ➀
" 2: 1 ➛ ⓵
" 3: 1 ➛ 1
let g:spacevim_windows_index_type = 1
<
*g:spacevim_enable_tabline_ft_icon*
Enable/Disable tabline filetype icon. default is 0.
*g:spacevim_enable_os_fileformat_icon*
Enable/Disable os fileformat icon. default is 0.
*g:spacevim_github_username*
Set the github username, It will be used for getting your starred repos, and
fuzzy find the repo you want.
*g:spacevim_windows_smartclose*
Set the default key for smart close windows, default is `q`.
*g:spacevim_disabled_plugins*
Disable plugins by name.
>
let g:spacevim_disabled_plugins = ['vim-foo', 'vim-bar']
<
*g:spacevim_custom_plugins*
Add custom plugins.
>
let g:spacevim_custom_plugins = [
\ ['plasticboy/vim-markdown', 'on_ft' : 'markdown'],
\ ['wsdjeg/GitHub.vim'],
\ ]
<
*g:spacevim_filetype_icons*
change the default filetype icon for a specific filtype.
>
let g:spacevim_filetype_icons['md'] = ''
<
*g:spacevim_force_global_config*
SpaceVim will load the global config after local config if set to 1. Default
is 0. If you have a local config, the global config will not be loaded.
>
let g:spacevim_force_global_config = 1
<
*g:spacevim_enable_powerline_fonts*
Enable/Disable powerline symbols. Default is 1.
*g:spacevim_lint_on_save*
Enable/Disable lint on save feature of SpaceVim's maker. Default is 1.
>
let g:spacevim_lint_on_save = 0
<
*g:spacevim_search_tools*
Default search tools supported by flygrep. The default order is ['rg', 'ag',
'pt', 'ack', 'grep', 'findstr', 'git']
*g:spacevim_project_rooter_patterns*
Set the project root patterns, SpaceVim determines the root directory of the
project based on this option. By default it is:
>
['.git/', '_darcs/', '.hg/', '.bzr/', '.svn/']
<
*g:spacevim_enable_projects_cache*
Enable/Disable cross session projects cache. Enabled by default.
*g:spacevim_projects_cache_num*
Setting the numbers of cached projects, by default it is 20.
*g:spacevim_project_auto_root*
Enable/Disable changing directory automatically. Enabled by default.
*g:spacevim_project_rooter_outermost*
Enable/Disable finding outermost directory for project root detection. By
default SpaceVim will find the outermost directory based on
`project_rooter_patterns`. To find nearest directory, you need to disable this
option:
>
let g:spacevim_project_rooter_outermost = 0
<
*g:spacevim_commandline_prompt*
Config the command line prompt for flygrep and denite etc.
*g:spacevim_todo_labels*
Option for setting todo labels in current project.
*g:spacevim_lint_on_the_fly*
Enable/Disable lint on the fly feature of SpaceVim's maker. Default is 0.
>
let g:spacevim_lint_on_the_fly = 0
<
*g:spacevim_update_retry_cnt*
Set the number of retries for SpaceVim Update when failed. Default is 3. Set
to 0 to disable this feature, or you can set to another number.
>
let g:spacevim_update_retry_cnt = 3
<
*g:spacevim_enable_vimfiler_welcome*
Enable/Disable vimfiler in the welcome windows. Default is 1. This will cause
vim to start up slowly if there are too many files in the current directory.
>
let g:spacevim_enable_vimfiler_welcome = 0
<
*g:spacevim_autocomplete_parens*
Enable/Disable autocompletion of parentheses, default is 1 (enabled).
*g:spacevim_hosts_url*
The host file url. This option is for Chinese users who can not use Google and
Twitter.
*g:github_issues_no_omni*
jaxbot/github-issues.vim {{{ Disable completion by github-issues.vim. Because
github-complete.vim provides more powerful completion.
*g:github_dashboard*
junegunn/vim-github-dashboard {{{
*g:dash_map*
rizzatti/dash.vim {{{ Allows configuration of mappings between Vim filetypes
and Dash's docsets.
==============================================================================
COMMANDS *SpaceVim-commands*
:SPLayer {layers} *:SPLayer*
Load exist layer, {layers} can be a string of a layer name, or a list of
layer names.
:SPVersion *:SPVersion*
Print the version of SpaceVim. The following lines contain information
about which features were enabled. When there is a preceding '+', the
feature is included, when there is a '-' it is excluded.
:SPSet {opt} [value] *:SPSet*
Set or check SpaceVim option. {opt} should be the option name of spacevim,
This command will use [value] as the value of option name.
:SPDebugInfo[!] *:SPDebugInfo*
print the debug information of spacevim, [!] forces the output into a new
buffer.
:SPRuntimeLog *:SPRuntimeLog*
view runtime log
:SPConfig *:SPConfig*
edit custom config file of SpaceVim, by default this command will open
global custom configuration file, '-l' option will load local custom
configuration file.
>
:SPConfig -g
<
:SPUpdate *:SPUpdate*
Command for update plugin, support completion of plugin name. If run without
argv, All the plugin will be updated.
>
:SPUpdate vim-airline
<
:SPReinstall *:SPReinstall*
Command for reinstall plugin, support completion of plugin name.
:SPInstall *:SPInstall*
Command for install plugins.
:A[!] {type} *:A*
Switch to alternate file based on {type}.
==============================================================================
FUNCTIONS *SpaceVim-functions*
SpaceVim#api#import({name}) *SpaceVim#api#import()*
Import API base the given {name}, and return the API object. for all
available APIs please check |spacevim-api|
SpaceVim#custom#SPC({m}, {keys}, {cmd}, {desc}, {is_cmd})
*SpaceVim#custom#SPC()*
The first parameter sets the type of shortcut key, which can be `nnoremap`
or `nmap`, the second parameter is a list of keys, and the third parameter
is an ex command or key binding, depending on whether the last parameter is
true. The fourth parameter is a short description of this custom key
binding.
SpaceVim#layers#load({layer}) *SpaceVim#layers#load()*
Load the {layer} you want. For all the layers SpaceVim supports, see
|SpaceVim-layers|. the second argv is the layer variable.
SpaceVim#logger#setLevel({level}) *SpaceVim#logger#setLevel()*
Set debug level of SpaceVim. Default is 1.
1 : log all messages
2 : log warning and error messages
3 : log error messages only
SpaceVim#logger#setOutput({file}) *SpaceVim#logger#setOutput()*
Set the log output file of SpaceVim. Default is empty.
SpaceVim#plugins#iedit#start() *SpaceVim#plugins#iedit#start()*
public API for iedit mode
>
KEY:
expr match expression
word match word
stack cursor pos stack
<
if only argv 1 is given, use selected word as pattern
==============================================================================
LAYERS *SpaceVim-layers*
SpaceVim support such layers:
languages:
https://www.scriptol.com/programming/list-programming-languages.php#query-lang
uage
==============================================================================
AUTOCOMPLETE *SpaceVim-layers-autocomplete*
CODE COMPLETION
SpaceVim uses neocomplete as the default completion engine if vim has lua
support. If there is no lua support, neocomplcache will be used for the
completion engine. SpaceVim uses deoplete as the default completion engine for
neovim. Deoplete requires neovim to be compiled with python support. For more
information on python support, please read neovim's |provider-python|.
SpaceVim includes YouCompleteMe, but it is disabled by default. To enable ycm,
see |g:spacevim_enable_ycm|.
SNIPPET
SpaceVim use neosnippet as the default snippet engine. The default snippets
are provided by `Shougo/neosnippet-snippets`. For more information, please
read |neosnippet|. Neosnippet support custom snippets, and the default
snippets directory is `~/.SpaceVim/snippets/`. If
`g:spacevim_force_global_config = 1`, SpaceVim will not append
`./.SpaceVim/snippets` as default snippets directory.
==============================================================================
CHECKERS *SpaceVim-layers-checkers*
The `checkers` layer provides syntax lint feature. The default lint engine is
|neomake|, this can be changed by `lint_engine` option:
>
[options]
lint_engine = 'ale'
<
OPTIONS
`lint_on_the_fly`: Syntax checking on the fly feature, disabled by default.
`lint_on_save`: Run syntax checking when saving a file.
`show_cursor_error`: Enable/Disable displaying error below current line.
==============================================================================
COLORSCHEME *SpaceVim-layers-colorscheme*
The ldefault colorscheme for SpaceVim is gruvbox. The colorscheme can be
changed with the `g:spacevim_colorscheme` option by adding the following line
to your `~/.SpaceVim/init.vim`.
>
let g:spacevim_colorscheme = 'solarized'
<
The following colorschemes are include in SpaceVim. If the colorscheme you
want is not included in the list below, a PR is welcome.
Also, there's one thing which everyone should know and pay attention to. NOT
all of below colorschemes support spell check very well. For example, a
colorscheme called atom doesn't support spell check very well.
SpaceVim is not gonna fix them since these should be in charge of each author.
==============================================================================
CORE *SpaceVim-layers-core*
The `core` layer of SpaceVim. This layer is enabled by default, and it
provides filetree, comment key bindings etc.
OPTIONS
`filetree_show_hidden`: option for showing hidden file in filetree, disabled
by default.
`enable_smooth_scrolling`: enable/disabled smooth scrolling key bindings,
enabled by default.
`enable_filetree_gitstatus`: enable/disable git status column in filetree.
`enable_filetree_filetypeicon`: enable/disable filetype icons in filetree.
NOTE: the `enable_vimfiler_gitstatus` and `enable_filetree_gitstatus` option
has been deprecated. Use layer option instead.
*spacevim-options-enable_vimfiler_gitstatus*
*spacevim-options-enable_filetree_gitstatus*
*g:spacevim_enable_vimfiler_gitstatus* *g:spacevim_enable_filetree_gitstatus*
*g:spacevim_enable_vimfiler_filetypeicon*
==============================================================================
CORE#STATUSLINE *SpaceVim-layers-core-statusline*
This layer provides default statusline for SpaceVim If you want to use
airline's statusline, just disable this layer
>
[[layers]]
name = 'core#statusline'
enable = false
<
==============================================================================
CORE#TABLINE *SpaceVim-layers-core-tabline*
This layer provides default tabline for SpaceVim If you want to use airline's
tabline, just disable this layer
>
[[layers]]
name = "core#tabline"
enable = false
<
==============================================================================
CSCOPE *SpaceVim-layers-cscope*
`cscope` layer provides |cscope| integration for SpaceVim. To load this layer:
>
[[layers]]
name = 'cscope'
<
LAYER OPTIONS
The layer option can be used when loading the `cscope` layer, for example:
>
[[layers]]
name = 'cscope'
auto_update = true
open_quickfix = 0
<
1. `auto_update`: Enable or disable automatic updating of the cscope
database.
2. `cscope_command`: set the command or path of `cscope` executable.
3. `open_location`: enable/disable open location list after searching.
4. `preload_path`: set the proload paths.
==============================================================================
EXPRFOLD *SpaceVim-layers-exprfold*
Fold code quickly according to expr.
Mappings:
>
Key Mode Function
----------------------------------------------------
ZB normal Open fold block template
ZF normal Fold block
ZC normal Fold block comment
<
==============================================================================
FORMAT *SpaceVim-layers-format*
format layer provides code formation for SpaceVim, the default formatting
plugin is |neoformat|.
OPTIONS
`format_on_save`: disabled by default.
KEY BINDINGS
>
Key binding Description
SPC b f format current buffer or selection lines
<
==============================================================================
GIT *SpaceVim-layers-git*
`git` layer provides git integration for SpaceVim.
LAYER OPTIONS
`git_plugin`: Set the background plugin used in `git` layer. The default value
is `git`, the following plugins are supported: `gina`, `fugitive` and `gita`.
>
[[layers]]
name = 'git'
git_plugin = 'git'
<
KEY BINDINGS
The following key bindings will be definded when the `git` layer is loaded.
>
Key Binding Description
SPC g s view git status
SPC g S stage current file
SPC g U unstage current file
SPC g c edit git commit
SPC g p git push
SPC g m git branch manager
SPC g d view git diff
SPC g A stage all files
SPC g b open git blame windows
SPC g h a stage current hunk
SPC g h r undo cursor hunk
SPC g h v preview cursor hunk
<
==============================================================================
GITHUB *SpaceVim-layers-github*
This layer provides GitHub integration for SpaceVim
MAPPINGS
>
Mode Key Function
-------------------------------------------------------------
normal SPC g h i show issues
normal SPC g h a show activities
normal SPC g h d show dashboard
normal SPC g h f show current file in browser
normal SPC g h I show issues in browser
normal SPC g h p show PRs in browser
<
==============================================================================
GTAGS *SpaceVim-layers-gtags*
`gtags` layer provides |gtags| integration for SpaceVim. To load this layer:
>
[[layers]]
name = 'gtags'
<
LAYER OPTIONS
The layer option can be used when loading the `gtags` layer, for example:
>
[[layers]]
name = 'gtags'
auto_update = true
open_quickfix = 0
<
1. `auto_update`: enable/disable database update automatically.
2. `open_quickfix`: This setting will open the |quickfix| list when
adding entries. same as |g:gtags_open_list|
3. `gtagslabel`: the backend of gtags command, you can use `ctags` or
`pygments`. It is empty string by default.
==============================================================================
INCSEARCH *SpaceVim-layers-incsearch*
This layer improved incremental searching for neovim/vim
mappings
>
key mode description
/ n/v incsearch forward
? n/v incsearch backward
g/ n/v incsearch stay
n n nohlsearch n
N n nohlsearch N
* n nohlsearch *
g* n nohlsearch g*
# n nohlsearch #
g# n nohlsearch g#
z/ n incsearch fuzzy /
z? n incsearch fuzzy ?
zg? n incsearch fuzzy g?
<Space>/ n incsearch easymotion
<
==============================================================================
INDENTMOVE *SpaceVim-layers-indentmove*
Move cursor quickly according to indent.
MAPPINGS
>
Key mode function
-----------------------------------------------------------------
EH normal/visual move up to nearest line with smaller
indent level
EL normal/visual move down to nearest line with larger
indent level
EJ normal/visual move down to nearest line with smaller
or same indent level
EK normal/visual move down to nearest line with larger
or same indent level
EI normal/visual move down to nearest child indent
<
==============================================================================
LANG#ACTIONSCRIPT *SpaceVim-layers-lang-actionscript*
This layer provides syntax highlighting for actionscript. To enable this
layer:
>
[[layers]]
name = "lang#actionscript"
<
==============================================================================
LANG#AGDA *SpaceVim-layers-lang-agda*
This layer provides syntax highlighting for agda. To enable this layer:
>
[layers]
name = "lang#agda"
<
KEY BINDINGS
The following key bindings will be added when this layer is loaded. All key
bindings start with `SPC l`.
>
Key binding Description
SPC l r execute current file
SPC l l reload
SPC l t infer
SPC l f refine false
SPC l F refine true
SPC l g give
SPC l c make case
SPC l a auto
SPC l e context
SPC l n Normalize IgnoreAbstract
SPC l N Normalize DefaultCompute
SPC l M Show module
SPC l y why in scope
SPC l h helper function
SPC l m metas
<
==============================================================================
LANG#ASCIIDOC *SpaceVim-layers-lang-asciidoc*
This layer provides syntax highlighting for asciidoc. To enable this layer:
>
[layers]
name = "lang#asciidoc"
<
==============================================================================
LANG#ASEPCTJ *SpaceVim-layers-lang-asepctj*
This layer provides syntax highlighting for asepctj. To enable this layer:
>
[layers]
name = "lang#asepctj"
<
==============================================================================
LANG#ASSEMBLY *SpaceVim-layers-lang-assembly*
This layer provides syntax highlighting for assembly. To enable this layer:
>
[layers]
name = "lang#assembly"
<
==============================================================================
LANG#AUTOHOTKEY *SpaceVim-layers-lang-autohotkey*
This layer provides syntax highlighting for autohotkey. To enable this layer:
>
[layers]
name = "lang#autohotkey"
<
==============================================================================
LANG#AUTOIT *SpaceVim-layers-lang-autoit*
This layer provides syntax highlighting for autoit. To enable this layer:
>
[layers]
name = "lang#autoit"
<
KEY BINDINGS
The following key binding will be added when this layer is loaded:
>
key binding Description
SPC l r run current file
<
==============================================================================
LANG#BATCH *SpaceVim-layers-lang-batch*
This layer is for batch development, disabled by default, to enable this
layer, add following snippet to your SpaceVim configuration file.
>
[[layers]]
name = 'lang#batch'
<
KEY BINDINGS
>
Mode Key Function
---------------------------------------------
normal SPC l r run current file
<
This layer also provides REPL support for batch, the key bindings are:
>
Key Function
---------------------------------------------
SPC l s i Start a inferior REPL process
SPC l s b send whole buffer
SPC l s l send current line
SPC l s s send selection text
<
==============================================================================
LANG#C *SpaceVim-layers-lang-c*
This layer is for c/cpp development, disabled by default, to enable this
layer, add following snippet to your SpaceVim configuration file.
>
[[layers]]
name = 'lang#c'
<
LAYER OPTIONS
`clang_executable`: Set the path to the clang executable, by default, it is
`clang`.
`enable_clang_syntax_highlight`: Enable/Disable clang based syntax
highlighting. By default it is disabled.
`libclang_path`: The libclang shared object (dynamic library) file path. By
default it is empty
`clang_std`: This is a dictionary for setting std for c/cpp. The default
valuable is :
>
'c' : 'c11',
'cpp' : 'c++1z',
'objc' : 'c11',
'objcpp': 'c++1z',
<
`clang_flag`: You should be able to just paste most of your compile flags in
there.
Here is an example how to use above options:
>
[[layers]]
name = "lang#c"
clang_executable = "/usr/bin/clang"
clang_flag = ['-I/user/include']
[layers.clang_std]
c = "c11"
cpp = "c++1z"
objc = "c11"
objcpp = "c++1z"
<
Instead of using `clang_flag` options, You can also create a `.clang` file in
the root directory of your project. SpaceVim will load the options defined in
`.clang` file. For example:
>
-std=c11
-I/home/test
<
Note: If `.clang` file contains std configuration, it will override
`clang_std` layer option.
KEY BINDINGS
>
Mode Key Function
---------------------------------------------
normal SPC l r run current file
<
This layer also provides REPL support for c, the key bindings are:
>
Key Function
---------------------------------------------
SPC l s i Start a inferior REPL process
SPC l s b send whole buffer
SPC l s l send current line
SPC l s s send selection text
<
}}}
==============================================================================
LANG#CHAPEL *SpaceVim-layers-lang-chapel*
This layer is for chapel development, disabled by default, to enable this
layer, add following snippet to your SpaceVim configuration file.
>
[[layers]]
name = 'lang#chapel'
<
KEY BINDINGS
>
Mode Key Function
---------------------------------------------
normal SPC l r compile and run current file
<
==============================================================================
LANG#CLOJURE *SpaceVim-layers-lang-clojure*
This layer provides clojure language support in SpaceVim. Including syntax
highlighting, code indent, code runner and REPL. This layer is not enabled by
default, To enable this layer:
>
[layers]
name = "lang#clojure"
<
LAYER OPTIONS
1. `clojure_interpreter`: Set the clojure interpreter, by default, it is
`clojure`
>
[[layers]]
name = 'lang#clojure'
clojure_interpreter = 'path/to/clojure'
<
KEY BINDINGS
>
Mode Key Function
---------------------------------------------
normal SPC l r run current file
<
This layer also provides REPL support for clojure, the key bindings are:
>
Key Function
---------------------------------------------
SPC l s i Start a inferior REPL process
SPC l s b send whole buffer
SPC l s l send current line
SPC l s s send selection text
<
==============================================================================
LANG#COFFEESCRIPT *SpaceVim-layers-lang-coffeescript*
This layer is for coffeescript development, disabled by default, to enable
this layer, add following snippet to your SpaceVim configuration file.
>
[[layers]]
name = 'lang#coffeescript'
<
KEY BINDINGS
>
Mode Key Function
---------------------------------------------
normal SPC l r run current file
<
This layer also provides REPL support for coffeescript, the key bindings are:
>
Key Function
---------------------------------------------
SPC l s i Start a inferior REPL process
SPC l s b send whole buffer
SPC l s l send current line
SPC l s s send selection text
<
==============================================================================
LANG#CRYSTAL *SpaceVim-layers-lang-crystal*
INTRO
The lang#crystal layer provides crystal filetype detection and syntax
highlight, crystal tool and crystal spec integration. To enable this layer:
>
[layers]
name = "lang#crystal"
<
MAPPING
>
Key binding description
SPC l r run current code
<
This layer also provides REPL support for crystal, the key bindings are:
>
Key Function
---------------------------------------------
SPC l s i Start a inferior REPL process
SPC l s b send whole buffer
SPC l s l send current line
SPC l s s send selection text
<
==============================================================================
LANG#CSHARP *SpaceVim-layers-lang-csharp*
INTRO
This layer includes utilities and language-specific mappings for csharp
development. By default it is disabled, to enable this layer:
>
[layers]
name = "lang#csharp"
<
KEY MAPPINGS
>
Mode Key Function
---------------------------------------------
normal SPC l b compile the project
normal SPC l f format current file
normal SPC l d show doc
normal SPC l e rename symbol under cursor
normal SPC l g g go to definition
normal SPC l g i find implementations
normal SPC l g t find type
normal SPC l g s find symbols
normal SPC l g u find usages of symbol under cursor
normal SPC l g m find members in the current buffer
normal SPC l s r reload the solution
normal SPC l s s start the OmniSharp server
normal SPC l s S stop the OmniSharp server
<
==============================================================================
LANG#D *SpaceVim-layers-lang-d*
This layer is for d development, disabled by default, to enable this layer,
add following snippet to your SpaceVim configuration file.
>
[[layers]]
name = 'lang#d'
<
KEY BINDINGS
>
Mode Key Function
---------------------------------------------
normal SPC l r run current file
<
This layer also provides REPL support for d, the key bindings are:
>
Key Function
---------------------------------------------
SPC l s i Start a inferior REPL process
SPC l s b send whole buffer
SPC l s l send current line
SPC l s s send selection text
<
==============================================================================
LANG#DART *SpaceVim-layers-lang-dart*
INTRO
The lang#dart layer provides code completion, documentation lookup, jump to
definition, dart_repl integration for dart. It uses neomake as default syntax
checker which is loaded in |SpaceVim-layer-checkers|. To enable this layer:
>
[layers]
name = "lang#dart"
<
LAYER OPTIONS
1. `dart_sdk_path`: Set the path of dart sdk, by default, it is ''.
KEY BINDINGS
>
Mode Key Function
---------------------------------------------
normal SPC l r run current file
<
This layer also provides REPL support for hack, the key bindings are:
>
Key Function
---------------------------------------------
SPC l s i Start a inferior REPL process
SPC l s b send whole buffer
SPC l s l send current line
SPC l s s send selection text
<
This layer use deoplete-dart as default completion plugin for dart. If the
|SpaceVim-layer-lsp| is enabled for dart, This plugin will not be loaded.
==============================================================================
LANG#DOCKERFILE *SpaceVim-layers-lang-dockerfile*
INTRO
The lang#dockerfile layer provides syntax highlighting for dockerfile.
==============================================================================
LANG#E *SpaceVim-layers-lang-e*
INTRO
This layer includes utilities and language-specific mappings for e
development. By default it is disabled, to enable this layer:
>
[layers]
name = "lang#e"
<
==============================================================================
LANG#EIFFEL *SpaceVim-layers-lang-eiffel*
This layer is for lang#eiffel development, disabled by default, to enable this
layer, add following snippet to your SpaceVim configuration file.
>
[[layers]]
name = 'lang#eiffel'
<
KEY BINDINGS
>
Key Function
-----------------------------
SPC l c run eclean
<
==============================================================================
LANG#ELIXIR *SpaceVim-layers-lang-elixir*
This layer is for elixir development, disabled by default, to enable this
layer, add following snippet to your SpaceVim configuration file.
>
[[layers]]
name = 'lang#elixir'
<
KEY BINDINGS
>
Mode Key Function
---------------------------------------------
normal SPC l r run current file
normal g d jump to definition
<
This layer also provides REPL support for d, the key bindings are:
>
Key Function
---------------------------------------------
SPC l s i Start a inferior REPL process
SPC l s b send whole buffer
SPC l s l send current line
SPC l s s send selection text
<
==============================================================================
LANG#ELM *SpaceVim-layers-lang-elm*
This layer is for elm development, disabled by default, to enable this layer,
add following snippet to your SpaceVim configuration file.
>
[[layers]]
name = 'lang#elm'
<
KEY BINDINGS
>
Mode Key Function
---------------------------------------------
normal SPC l r run current file
<
This layer also provides REPL support for elm, the key bindings are:
>
Key Function
---------------------------------------------
SPC l s i Start a inferior REPL process
SPC l s b send whole buffer
SPC l s l send current line
SPC l s s send selection text
<
==============================================================================
LANG#ERLANG *SpaceVim-layers-lang-erlang*
This layer is for erlang development, disabled by default, to enable this
layer, add following snippet to your SpaceVim configuration file.
>
[[layers]]
name = 'lang#erlang'
<
KEY BINDINGS
>
Mode Key Function
---------------------------------------------
normal SPC l r run current file
<
This layer also provides REPL support for erlang, the key bindings are:
>
Key Function
---------------------------------------------
SPC l s i Start a inferior REPL process
SPC l s b send whole buffer
SPC l s l send current line
SPC l s s send selection text
<
==============================================================================
LANG#EXTRA *SpaceVim-layers-lang-extra*
INTRO
The lang#extra layer provides syntax highlighting, indent for extra
programming language. includes:
1. pug
digitaltoad/vim-pug syntax highlighting and indent
2. i3config
PotatoesMaster/i3-vim-syntax syntax highlighting for i3 config
3. irssi config
isundil/vim-irssi-syntax syntax highlighting for irssi config
==============================================================================
LANG#FENNEL *SpaceVim-layers-lang-fennel*
This layer is for fennel development, disabled by default, to enable this
layer, add following snippet to your SpaceVim configuration file.
>
[[layers]]
name = 'lang#fennel'
<
LAYER OPTIONS
1. `fennel_interpreter`: Set the path of `fennel` command,
by default it is `fennel`.
KEY BINDINGS
>
Mode Key Function
---------------------------------------------
normal SPC l r run current file
<
This layer also provides REPL support for fennel, the key bindings are:
>
Key Function
---------------------------------------------
SPC l s i Start a inferior REPL process
SPC l s b send whole buffer
SPC l s l send current line
SPC l s s send selection text
<
==============================================================================
LANG#FORTH *SpaceVim-layers-lang-forth*
This layer is for forth development, disabled by default, to enable this
layer, add following snippet to your SpaceVim configuration file.
>
[[layers]]
name = 'lang#forth'
<
KEY BINDINGS
>
Mode Key Function
---------------------------------------------
normal SPC l r run current file
<
==============================================================================
LANG#FORTRAN *SpaceVim-layers-lang-fortran*
This layer is for fortran development, disabled by default, to enable this
layer, add following snippet to your SpaceVim configuration file.
>
[[layers]]
name = 'lang#fortran'
<
KEY BINDINGS
>
Mode Key Function
---------------------------------------------
normal SPC l r run current file
<
This layer also provides REPL support for fortran, the key bindings are:
>
Key Function
---------------------------------------------
SPC l s i Start a inferior REPL process
SPC l s b send whole buffer
SPC l s l send current line
SPC l s s send selection text
<
==============================================================================
LANG#FOXPRO *SpaceVim-layers-lang-foxpro*
INTRO
The lang#foxpro layer provides syntax highlighting for foxpro.
==============================================================================
LANG#FSHARP *SpaceVim-layers-lang-fsharp*
This layer is for fsharp development, disabled by default, to enable this
layer, add following snippet to your SpaceVim configuration file.
>
[[layers]]
name = 'lang#fsharp'
<
This layer also provides REPL support for goby, the key bindings are:
>
Key Function
---------------------------------------------
SPC l s i Start a inferior REPL process
SPC l s b send whole buffer
SPC l s l send current line
SPC l s s send selection text
<
==============================================================================
LANG#GO *SpaceVim-layers-lang-go*
This layer includes code completion and syntax checking for Go development.
MAPPINGS
>
Mode Key Function
---------------------------------------------
normal SPC l a go alternate
normal SPC l b go build
normal SPC l c go coverage
normal SPC l d go doc
normal SPC l D go doc vertical
normal SPC l e go rename
normal SPC l g go definition
normal SPC l G go generate
normal SPC l h go info
normal SPC l i go implements
normal SPC l I implement stubs
normal SPC l k add tags
normal SPC l K remove tags
normal SPC l l list declarations in file
normal SPC l L list declarations in dir
normal SPC l m format improts
normal SPC l M add import
normal SPC l x go referrers
normal SPC l s fill struct
normal SPC l t go test
normal SPC l v freevars
normal SPC l r go run
<
==============================================================================
LANG#GOBY *SpaceVim-layers-lang-goby*
This layer is for goby development, disabled by default, to enable this layer,
add following snippet to your SpaceVim configuration file.
>
[[layers]]
name = 'lang#goby'
<
KEY BINDINGS
>
Mode Key Function
---------------------------------------------
normal SPC l r run current file
<
This layer also provides REPL support for goby, the key bindings are:
>
Key Function
---------------------------------------------
SPC l s i Start a inferior REPL process
SPC l s b send whole buffer
SPC l s l send current line
SPC l s s send selection text
<
==============================================================================
LANG#GOSU *SpaceVim-layers-lang-gosu*
This layer is for gosu development, disabled by default, to enable this layer,
add following snippet to your SpaceVim configuration file.
>
[[layers]]
name = 'lang#gosu'
<
KEY BINDINGS
>
Mode Key Function
---------------------------------------------
normal SPC l r run current file
<
==============================================================================
LANG#GRAPHQL *SpaceVim-layers-lang-graphql*
INTRO
The lang#graphql layer provides syntax highlighting indent for graphql. To
enable this layer:
>
[layers]
name = "lang#graphql"
<
This filetype is automatically selected for filenames ending in .graphql,
.graphqls, and .gql. If you would like to enable automatic syntax support for
more file extensions (e.g., *.prisma), add following into bootstrap function.
>
augroup mybootstrap
au!
au BufNewFile,BufRead *.prisma setfiletype graphql
augroup END
<
==============================================================================
LANG#GROOVY *SpaceVim-layers-lang-groovy*
This layer is for groovy development, disabled by default, to enable this
layer, add following snippet to your SpaceVim configuration file.
>
[[layers]]
name = 'lang#groovy'
<
KEY BINDINGS
>
Mode Key Function
---------------------------------------------
normal SPC l r run current file
<
This layer also provides REPL support for groovy, the key bindings are:
>
Key Function
---------------------------------------------
SPC l s i Start a inferior REPL process
SPC l s b send whole buffer
SPC l s l send current line
SPC l s s send selection text
<
==============================================================================
LANG#HACK *SpaceVim-layers-lang-hack*
INTRO
This layer is for hack development, disabled by default, to enable this layer,
add following snippet to your SpaceVim configuration file.
>
[[layers]]
name = 'lang#hack'
<
KEY BINDINGS
>
Mode Key Function
---------------------------------------------
normal SPC l r run current file
<
This layer also provides REPL support for hack, the key bindings are:
>
Key Function
---------------------------------------------
SPC l s i Start a inferior REPL process
SPC l s b send whole buffer
SPC l s l send current line
SPC l s s send selection text
<
==============================================================================
LANG#HASKELL *SpaceVim-layers-lang-haskell*
This layer is for haskell development, disabled by default, to enable this
layer, add following snippet to your SpaceVim configuration file.
>
[[layers]]
name = 'lang#haskell'
<
KEY BINDINGS
>
Mode Key Function
---------------------------------------------
normal SPC l r run current file
<
This layer also provides REPL support for haskell, the key bindings are:
>
Key Function
---------------------------------------------
SPC l s i Start a inferior REPL process
SPC l s b send whole buffer
SPC l s l send current line
SPC l s s send selection text
<
==============================================================================
LANG#HTML *SpaceVim-layers-lang-html*
This layer is for html development, disabled by default, to enable this layer,
add following snippet to your SpaceVim configuration file.
>
[layers]
name = "lang#html"
<
OPTIONS
`emmet_leader_key`: change the default leader key for emmet
`emmet_filetyps`: Set the filetypes for enabling emmet
>
[layers]
name = "lang#html"
emmet_leader_key = "<C-e>"
emmet_filetyps = ['html']
<
KEY BINDINGS
>
Key Binding description
<C-e> emmet leader key
<
==============================================================================
LANG#HY *SpaceVim-layers-lang-hy*
This layer is for hy development, disabled by default, to enable this layer,
add following snippet to your SpaceVim configuration file.
>
[[layers]]
name = 'lang#hy'
<
LAYER OPTIONS
1. `hy_interpreter`: Set the hy interpreter, by default, it is `hy`
>
[[layers]]
name = 'lang#hy'
hy_interpreter = 'path/to/hy'
<
KEY BINDINGS
>
Mode Key Function
---------------------------------------------
normal SPC l r run current file
<
This layer also provides REPL support for hy, the key bindings are:
>
Key Function
---------------------------------------------
SPC l s i Start a inferior REPL process
SPC l s b send whole buffer
SPC l s l send current line
SPC l s s send selection text
<
==============================================================================
LANG#IDRIS *SpaceVim-layers-lang-idris*
This layer is for idris development, disabled by default, to enable this
layer, add following snippet to your SpaceVim configuration file.
>
[[layers]]
name = 'lang#idris'
<
KEY BINDINGS
>
Mode Key Function
---------------------------------------------
normal SPC l r run current file
<
This layer also provides REPL support for idris, the key bindings are:
>
Key Function
---------------------------------------------
SPC l s i Start a inferior REPL process
SPC l s b send whole buffer
SPC l s l send current line
SPC l s s send selection text
<
==============================================================================
LANG#IO *SpaceVim-layers-lang-io*
This layer is for io development, disabled by default, to enable this layer,
add following snippet to your SpaceVim configuration file.
>
[[layers]]
name = 'lang#io'
<
KEY BINDINGS
>
Mode Key Function
---------------------------------------------
normal SPC l r run current file
<
This layer also provides REPL support for io, the key bindings are:
>
Key Function
---------------------------------------------
SPC l s i Start a inferior REPL process
SPC l s b send whole buffer
SPC l s l send current line
SPC l s s send selection text
<
==============================================================================
LANG#J *SpaceVim-layers-lang-j*
This layer is for j development, disabled by default, to enable this layer,
add following snippet to your SpaceVim configuration file.
>
[[layers]]
name = 'lang#j'
<
KEY BINDINGS
>
Mode Key Function
---------------------------------------------
normal SPC l r run current file
<
This layer also provides REPL support for j, the key bindings are:
>
Key Function
---------------------------------------------
SPC l s i Start a inferior REPL process
SPC l s b send whole buffer
SPC l s l send current line
SPC l s s send selection text
<
==============================================================================
LANG#JANET *SpaceVim-layers-lang-janet*
This layer is for janet development, disabled by default, to enable this
layer, add following snippet to your SpaceVim configuration file.
>
[[layers]]
name = 'lang#janet'
<
KEY BINDINGS
>
Mode Key Function
---------------------------------------------
normal SPC l r run current file
<
This layer also provides REPL support for janet, the key bindings are:
>
Key Function
---------------------------------------------
SPC l s i Start a inferior REPL process
SPC l s b send whole buffer
SPC l s l send current line
Reference in New Issue View Git Blame Copy Permalink